Question about Philips Televison & Video
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Philips DVP3120
You can follow the following instructions to make your philips dvp3120 player multi region!!!!!
1. Turn on the unit
2. Open the loading tray
3. Press the "Setup" button on the remote
4. Navigate to the "Preferences" page using the right arrow key
5. Enter 138931
6. You will now see the current region code displayed
7. Use the Up/Down arrow keys to select the region required or "0" for all regions
8. Press the "Play" button on the remote
Posted on Jan 27, 2008
SOURCE: multi region hacks
Try this may be work
Put DVD into player - wait for regional code violation screen to appear
Once this has occurred press the M (Memory) button on your remote
Press 1 for Title 1 and Play on the remote - this will over-ride the regional code violation detection menu
You can watch the movie by pressing Fwd on remote and change chapters by using the T (Title/Chapter) button on the remote)
Switch On DVD player without disc in machine
Press 8, 4, 2, 6 and 9
Player should turn itself Off. If not switch it Off
Switch player back On
Posted on Mar 05, 2008
SOURCE: Philips MCD716
1.Press DVD "OPEN/CLOSE" key (RC (remote Control) or main unit) to open the DVD tray (note:if no disc on tray,then you have not to open it);
2.Press RC "SYSTEM" key to enter DVD system setup menu;
3.Press RC "direction "key to hightlight the forth item "PREFERENCE PAGE" (not entering the sub-item );
4.Press RC numeric key sequentially 811502(enter code, however no display on TV);
5.Press RC "down direction" or "up direction" key to change REGION CODE,"0" is all code.
6.Press RC "OK" key to confirm.
7.Press RC "SYSTEM" key to exit DVD system setup menu
Posted on Jan 22, 2009
To check the software version and change
region code of your DVD Portable
1. Power ON the DVD player and open the DVD
2. Press the “SETUP” button on remote control,
then select the “Preference MENU”
3. Press the remote button in the sequence as
9 -> 6 -> 5 -> 3
4. The LCD display showed the existing region
code. Press (navigation up) or
(navigation down) repeatedly to select the
number from 0 to 6.
5. Refer below table for your region code setting
4=Australia, New Zealand
Select “0” setting = Region Free (confidential)
Posted on Mar 04, 2009
With your set on and without disc in the tray:
1. Press PLAY from your remote control
2. Press the following button sequence: 1590 2379 390
3. Press PLAY again
This will release the region verification in your home theater (region free). However, some DVDs (multiregion in particular) will not play, since they require region detection from the player unit.
I've done this to my 3090 and been using it like this for 3 years.
Posted on May 27, 2009
Tips for a great answer:
May 03, 2016 | JVC HR-XVC1U DVD-VCR Combo
Jun 01, 2008 | Panasonic DMR-EH57 HDD Recorder Player
Sep 27, 2015 | Televison & Video
May 03, 2011 | Video Game Consoles & Games
Nov 08, 2009 | Garden
Jul 22, 2009 | Philips Televison & Video
May 28, 2009 | Philips Televison & Video
Nov 28, 2008 | Alpine Televison & Video
Dec 31, 2007 | Televison & Video
34 people viewed this question
Usually answered in minutes!