Question about Washing Machines

1 Answer

Hotpoint aqualtis aqxx169pm

3 yrs old in may new top of the range washing machine very silent when washing as soon as it starts spinning it starts to become louder

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

It appears your clutch assembly has failed in this instance.

For replacement parts - head on over to PartSelect.com or RepairClinic.com and enter in your full model number for a full parts listing.
I recommend both sites because ...


FixYa has no affiliation with either site - I have been using and recommending them for years - trouble free.

PartSelect has a great schematic database for locating the part on your unit and great "testimonials" for each part that often times includes HOW-TO information.
RepairClinic has pictures of each part they sell and also a great how-to and troubleshooting for basic repairs.


If your unit has never been serviced - there should still be an original service manual enclosed in plastic taped to the inside of the shell.
In the service manual are Error codes, maintenance procedures, and troubleshooting steps you can follow.


Anything too complicated or beyond your scope should be handled by a professional.

If you think you want to tackle the repair - and have gotten stuck on a step - reply to your question and I will be glad to help you out.




Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Posted on Sep 16, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hotpoint aqualtis AQXXL 129PI


could be a bad timer? sticking at the wash cycle. it does agitate right? other wise bad water pressure switch

Aug 07, 2014 | Hotpoint Washing Machines

1 Answer

Hotpoint Aqualtis 2 months old dial turns without changing the display


machine is under warranty, contact Hotpoint for a service call.

Oct 15, 2012 | Hotpoint Washing Machines

1 Answer

Excessively noisy when it spins. The faster the spin the noisier it gets.


Sounds like the Drum Bearings are gone they are **** on Hotpoint..Could be quite expensive depending on age...3 years old you will need a half drum complete with Bearings approx cost £80 plus labour....if more than 4 yrs old then perhaps bearing kit plus 3 hrs labour....Hotpoint give a FREE 5 yrs parts warranty however CALL CHARGE....£105 approx parts are free.....You need to ecide if you should fix or just buy a new one........

Jan 14, 2011 | Hotpoint WMA58 Front Load Washer

1 Answer

Zanussi FJS 1425W - the machine is not spinning the clothes so clothes are quite wet when they are washed so have to spin but this is also not working well - washing purchased approx 7 yrs ago -


hotpoint top loading washing machine serial number TS182924N MODEL NUMBER HNXR1060T8WW. machine won't spin and will not empty water, just a humming noise. number on scamatic diagram 175D275OGO71 MACHINE IS APROX 20 YEARS OLD

Jan 06, 2010 | Zanussi Washing Machines

1 Answer

Hotpoint aqualtis giving H20 error, looks like fill problem, but cannot see anything stopping the water flowing into the machine.


i have hotpoint aqualtis, it washes & empties but then starts flashing when ready to rinse. any suggestions?

Dec 04, 2009 | Washing Machines

1 Answer

My Hotpoint Aqualtis washing machine leaves


the drain **** in the machine is partially clogged. my best guess is at the water pump. your washer needs to be serviced. call a serviceman..

Nov 15, 2009 | Washing Machines

3 Answers

Trouble shooting the hotpoint aqualtis aqxxf149pi flashing f08


my hotpint aqualtis aqxxf149pi make a funny grinding noise when it spins help please?

Jun 25, 2009 | Hotpoint Washing Machines

1 Answer

A hotpoint aqualtis aqxx149pm spinning loudly


Hi, This is a common problem with the hotpoint range. It will be the main wash bearings that have failed and need replacing. This is a very easy process but is quite time consuming. Remember tho change everything that is; Bearings, and bearing spider and front tub seal as you dont want to have to do it again in a short time or have leaks coming from the front.
Good luck and get back to me if you need any further help....................

Jan 02, 2009 | Washing Machines

1 Answer

Hotpoint Aqualtis Error code F11


please could someone help as i have the exact same problem with my aqualtis zqxgf149,exactly as above,fitted new pump myself and its now emptying the water but wont spin and in wash cycle f11 comes back up

Jun 27, 2008 | Washing Machines

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

98 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...