Frigidaire GLEQ2152ES Electric Dryer Logo
Holland Posted on Oct 24, 2012
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Need test sequence for frig gleq215es electric dryer.

  • Holland Oct 28, 2012

    The dryer works, I am trying to find the electronic test sequence using the control panel.

×

1 Answer

  • Official Brand Answer 4,342 Answers
  • Posted on Oct 26, 2012

Fixya Pro

Electrolux
Official Brand Answer
Level 0:

Joined: Mar 24, 2011
Answers
4342
Questions
0
Helped
1466698
Points
5907

Hello - The following could be reasons for your dryer to stop working; there could possibly be a malfunction in the thermostat in the return, so if it gets too hot on the auto dry cycle, it stops and will not re-start until it cools down. This could be caused by either lint or something else clogging the vent thus causing it to overheat. You should be able to feel the top of the dryer right at the back of the top near the console right after it shuts off. If it is getting too hot to the touch look to the items I have mentioned. Should you find that these suggestions are ineffective, may we suggest contacting a professional to move forward accurately who will be able to diagnose the problem.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

Frigidaire dryer won't run--starts then stops

please tell me how much load you are putting in it
0helpful
1answer

KEY TEST

Hello Wilfred, thank you for your question! Typically speaking the 12 o'clock position means to turn the knob in the upward position like if you were setting a clock to 12 am/pm. Hope this information helps to some degree. If you have further questions, please do not hesitate to reconnect.
0helpful
1answer

Not dispensing water or ice

Disconnect electricity; electrical tape wires u took off water valve to prevent short; replug frig. Take the water valve at the back of the frig/where the 2 water lines connect/, to the parts store for testing. Probably will test bad; if so, easy to put new one in. Save $75-$150 labor.
4helpful
2answers

Says "Controls locked"

Press and hold the END OF CYCLE button for about ten seconds.
0helpful
1answer

Where EXACTLY is the reset button on the bosch wtl 5410? behind the lima bean panel? in the little white box upper left? where EXACTLY is this frigging switch?

sometimes, it's behind the panel where all your switches, etc. are - in the top front of your machine. First, disconnect the cord from the electrical outlet before you do this, or at least turn off the circuit breaker. 
0helpful
1answer

Frig. model# gler642as3.. No power. No light.

Go to http://www.partselect.com/ModelFrames.aspx?ModelID=1107121&ModelNum=GLER642AS3&mfgModelNum=&ManufactureID=4&Selected=ZGBPCQG3&Position=4&mfg=Frigidaire&Type=&Mark=0 the parts you need to check are F15, F33 and F36. F15 is the element. F33 is the High limit thermostat and the F36 is thermal limiter. The most common problem with these dryers when they are not heating is a bad thermal limiter (F36) F33 would be my second guess and the element would be my next. Either one of these could be causing it not to heat. Good luck
0helpful
1answer

My hotpoint qasher/dryer aquarinus super silent wd640 1400 spin just says test on displays and does not let me wash :(

Normal 0 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} According to the manual ‘TEST’ should only appear in the display when the hardware key is inserted into the rear socket of the machine ready to commence a test sequence. The only advice I can give is to turn the appliance off and remove the plug from the power socket for at least one minute then plug it back in and try it again. These machines have 3 phase motors and the heat sink on the module retains an electric charge for some time after the appliance has been switched off so be mindful if you decide to venture into the inside of the cabinet.
0helpful
3answers

PLHS69EGSS1 Freezer not cooling properly but Frig is OK

This is one time you might need gas. Your freezer needs to be 20 degrees or less for the ice maker to work.
Not finding what you are looking for?

68 views

Ask a Question

Usually answered in minutes!

Top Frigidaire Dryers Experts

Brad Brown

Level 3 Expert

19187 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Paul Bade

Level 3 Expert

1818 Answers

Are you a Frigidaire Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...