Record time stamp on video - Canon XF100 Camcorder

From the 'Operating Instructions' manual:
"The recording date and time are not displayed while recording. however, they are recorded automatically onto the tape. To display the
recording date and time, press DATA CODE on the Remote Commander (remote control) during recording."

Well if you decided to date/time stamp on your films, then that is what it has done for you, just go into setting on menu and turn them off again, that is the default mode.

I turned it on, and pressed the video/live recording button that was next to the trash/delete button. That is a whole other menu. After pressing the video/live recording button, I just went up to the first selection, "Program." That takes it off the basic/Q-Mode, which opens additonal options, like ISO and Date Stamp on/off. So basically:
1) Turn on, having the camera on picture taking mode, not review picture mode.
2) Press Video/Live Recording button.
3) Go to first option, called "Program"
4) In this mode, many other options are available, and there will be smaller icons.

unless the security camera has a setting for recording the date stamp you probably can't. The camera probably has a setup tab to enable embedding the date stamp on the video.

The time/date is 'stamped' onto the video during recording. The time/date stamp function can be turned on or off in the setup menu. If it was 'on' during recording, it will be displayed when played back. If it was turned off, it will not be seen on the recording.

Use ENESOFT DV PROCESSOR. (It's free, I don't work there LOL)

You can't remove date and time stamp on recorded movie now. Go to Menu and disable date-time stamp function for future recording.
User manaul of CCD-TRV228E is availabe here...
http://support.sony-europe.com/dime/camcorders/v8c/v8c.aspx?site=&m=CCD-TRV228E&site=odw_en_GB&odw_model=CCD-TRV228E
Have nice day.

If the date and time appear during playback to a television from the camcorder, we discovered that the date and time stamp can be recorded during playback through a DVD Recorder.

Hi, go thru the menu on the camera and look for autodate and turn it off. Thats how it's set up on my Sony camcorder. Hope this helps,, Mechanic

I have the same problem