Question about TruTech PLV16320 Television

1 Answer

32in trutech lcd monitor/t.v.

Monitor/t.v. just stopped working, basicaly will not turn on any more.i have changed outlets,i have left it unplugged for a while,what next?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 367 Answers

Open the back of the TV,and look at the can shaped items on the boards.If any of them have the tops,or bottoms bulged out,they need to be replaced.This should get it working again.I hope this helps.If you have any questions,please let me know.Thank You very much!


Tyler

Posted on Jan 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I turn off the Samsung sync-master p2050 monitor?


If it doesn't turn off by holding the power button down for 10 seconds, then it cannot be turned off by the power button alone, like most modern lcd monitors. Most modern monitors goes into standby mode. To completely cut power, you must unplug the power cable.
I've enclosed a link to the install manual for reference.
Samsung SyncMaster P2050 User Manual Page 7

Nov 24, 2014 | Samsung Computers & Internet

1 Answer

FIND A PLACE TO BUY A REPLACEMENT SCREEN FOR MY Trutech PLV16320VM 32" Thin LCD Monitor


A replacement screen plus labor would be about the same as a new monitor.

Mar 27, 2014 | TruTech Televison & Video

1 Answer

TruTech PVS31170S1W 17


Your set may have had a hiccough; try pulling the AC plug and ignoring it overnight. It sounds as if it is looking for signal from a PC and may have changed its input selection due to a glitch.If the problem persists, try entering the setup menu and checking the selected input.

Dec 11, 2011 | TruTech PVS31170S1W 17 in. LCD Television

1 Answer

I have an emachines E181H TFT LCD monitor and a few months ago it would turn off at random and would come back on.After a few days it stopped turning off by itself I have had no problems till recently,...


After a while LCD monitors develop problems that are usually caused by faults in the internal circuitry. This could be an issue with the power capacitors failing. If you feel confident enough, you can remove the back cover and check to see if any capacitors are bulging or leaking. (Give it at least 24 hours unplugged to allow the capacitors to discharge before doing so). I found THAT little bit of knowledge out the hard way

Jan 22, 2011 | Acer AL2017 20" LCD Monitor

1 Answer

I have a trutech undercounter mount DVD/TV combo. It was working fine, and all of a sudden it turned off and will not come back on. We checked the outlet and it is fine.


Unplug the power cord from wall outlet and take the unit apart follow the power cord inside the unit it goes to the fuse. Check the fuse most of the time the fuse is bad.

Jul 22, 2009 | TruTech LMD-5702RT Portable DVD Player

1 Answer

Power light keeps flashing, unable to power up screen. Tried unplugging power source and turning off hard drive. Neither of or combo of worked.


Turn off the power to your monitor. Unplug from the back of your computer and for the outlet wait 10 to 20 minutes and reconnect and try to cut it on.

Jun 05, 2009 | AOpen F75PS 17" Flat Panel LCD Monitor

1 Answer

Helpme please


Resetting the TV
If the buttons on the remote AND the buttons on the TV case do not work (channels do not change and you cannot open or navigate the menu), the TV has stopped responding. Reset the TV as follows:

NOTE:
Some TVs have a reset button. If available and accessible, try using the reset buttons before using the steps below. Using the reset buttons can save time.

clip_image001.jpg
1. Unplug the TV power cord from the power outlet.
2. Unplug any connected devices (DVD, Set-top boxes, etc...)
3. Press and hold the TV power button for five seconds.
4. Plug the TV power cord back into the power outlet and turn on the TV.
5. Open the on-screen menu to confirm that the TV is responding again.
6. Turn off the TV and reconnect the devices.
7. Turn on the TV.

hope this may help;

Regards,
VOTIT

Aug 25, 2008 | Philips 150S4FB 15" LCD Monitor

Not finding what you are looking for?
TruTech PLV16320 Television Logo

Related Topics:

97 people viewed this question

Ask a Question

Usually answered in minutes!

Top TruTech Televison & Video Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

The Knight
The Knight

Level 3 Expert

69894 Answers

Radames Pagan
Radames Pagan

Level 3 Expert

196 Answers

Are you a TruTech Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...