Question about StarTech.com StarView SV211K 2-port KVM Switch
Try and determine the lowest transponder frequency that you can get a signal on.
Look at the frequencies you already have on the channels saved so far and choose the lowest.
Then in the installation menu select MANUAL SCAN and set that as the frequency.
Make sure you can see a signal and scroll down to Network scan and change to ENABLE with the Right arrow.
While still highlighted, click OK.
Scanning should then begin. It will say 1/1 to start with but should then jump up to 1/?? (the ?? being 2 digits).
Posted on Jan 02, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Apr 28, 2009 | Televison & Video
Apr 01, 2009 | StarTech.com StarView SV211K 2-port KVM...
Dec 30, 2008 | StarTech.com StarView SV211K 2-port KVM...
55 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: