I just bought a kyocera km-1650 from a friend of a friend. the paper in cassette 1 keeps reading as 8 1/2 x 17 even though its 8 1/2 x 11 paper. ive readjusted the guides and when i press copy it prints with a huge space on the left and right and bottom is cut off? anyone know how to fix this? is there a general reset button that will take everytjing back to the manufacturing defaults? thanks so much!

SOURCE: KM-2530 with C0050 error code ?

it's the the expansion card on the main board in the middle, has a yellow circular cmos battery. Either its faulty or popped out during moving the machine. if faulty, replace.

SOURCE: i have kyocera km 1650

press status key
scroll down to service
press enter
press 163
press enter
wait 10 seconds
recycle power

SOURCE: misfeeds

We lease the copier and have a maintenance contract. We call for a technician to come out and fix the problem. I was trying to find out if there was something preventive that we could do to avoid the misfeeds. For instance, maybe a particular type of paper (brand) is recommended. We use different brands but all are 20lb bond (some recycled, some not). We attempt to keep the paper from absorbing humidity, keeping it in its wrapper until use. Often I think it is that the sensors in the copier get "dusty" and then don't function properly. The user cannot get to these sensors -- that takes a technician.

SOURCE: I need to reset ID Code on Kyocera Mita KM-5530

The solution is easy! Push the Default Setting/Counter button on the top right side of the keyboard. Press the the Managment icon on the diplay. Enter 6-4-8-2 on the keyboard and select the Managment icon in the OFF position. Close all windows on the display and you should be ready to go.

SOURCE: Kyocera-Mita going offline

it sounds like there is an ip conflict... you may need to reserve an ip address just for the copier or failing that change your copiers ip address to one below the ip range... if it still has problems then I would check the network cables.... and see if you get any error codes... copier can go offline if 1. the print card is loose... bad mounting socket on the main board... ip conflict... someone else has the ip address... poor network traffic... the signals over the network cables are degrading too fast... so the copier gets a corrupt file or unfinished file and bombs out... power surge... this causes firmware corruption and the thing just starts shooting wierd error codes... I think I have given you enough to think about...

I’m happy to assist further over the phone at https://www.6ya.com/expert/norman_d2fa496dce30c65d

Instant Repair Help over the Phone

6ya.com

Save Time & Money by instantly connecting to...