Question about Acer Professional P211 21" CRT Monitor

1 Answer

New netbook cannot see full screen

When i go onto a site to play poker etc i cannot see the bottom of the screen with my account details and balance. There is no max or min button available on the page. It is a targa 1016

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 54 Answers

This is an issue with netbooks.
1. Make sure you have your screen resolution set with the highest numbers available (most dots per inch). (Much > 600x800.)
2. Rotate the screen temporarily by using graphic options.

OR IF you have Windows 7:
Change the Display from "Medium" to "Small" setting. It's fine to change it back to medium when finished with the tall window, but remember how to find the setting. You'll need it again.
Dawn C. Weikle, CNE
SouthportPC.com

Posted on Dec 23, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

View sonic moniter repair


If you wish to get some details; check the site linked here. Viewing it in "Mosaic" will make surf easy Pull up older posts. Surf the site with patience.
http://electronicshelponline.blogspot.com/

Apr 17, 2014 | Balance CM2015 15" LCD Monitor

2 Answers

REQUEST SUBMITTED Your information has been sent to our customer service department. We will review your case (est. time 72 hours) and take action as necessary.help mi


REQUEST SUBMITTED

Your information has been sent to our customer service department. We will review your case (est. time 72 hours) and take action as necessary.

Jan 19, 2013 | Computer Monitors

1 Answer

Cannot fit to screen size


You probably need to install a display driver for this monitor on your netbook. http://us.aoc.com/monitor_displays/e950swn

Dec 05, 2012 | AOC 19" LED Monitor e950Swn Black

1 Answer

While the screen on the P191Wis wide enough, I cannot get it so that I can read the bottom of some programs. An example is when a pop up comes on that I want to continue, I can't get to the bottom of the...


Adjust the resolution of the monitor
Control panel / display.
You may need to update your graphics drivers if you have a Graphics card fitted, if you have graphics built onto the motherboard, you need to check your manufacturers support page for the latest driver.

Aug 08, 2010 | Acer P191WBD LCD Monitor

1 Answer

I have problems viewing dark websites. My screen dim's, I can still read everything, it's just very dark. It also makes a humming noise. Is it something I can adjust. Cheers, Michelle


There is a small row of buttons on the bottom right of the front panel of the monitor. From these buttons it's possible to adjust: Gamma correction, Brightness, Color balance, H/V position, Color temperature, and Contrast. By pushing the menu button your choices should be diplayed on screen. If there is a choice of "factory default" try that and it will take all adjustments back to as they were when it was set up when new. You won't find buttons to match the adjustments I mentioned above. There may be just 3 buttons but by way of the on screen menu they are enough to acheive what you want.

From past experience I'd say it's possible someone has been playing around with the buttons and upset it's settings.

If you continue to have problems I can download the manual and guide you from there.

Apr 25, 2010 | Samsung SyncMaster 2253BW LCD Monitor

4 Answers

New netbook unable to see whole screen


I was having that problem as well on my msi wind netbook. Turned out that the default DPI setting was on large. After changing it to normal it fixed it. This is what I did, perhaps it will work for you. Good luck.

  1. Right-click somewhere on your desktop (not on an icon) and select properties.
  2. Click on the Setting tab and once there click advanced.
  3. You will see DPI setting, change that to Normal size (96 DPI) and then click apply
  4. Now restart your computer for the changes to fully take effect.

Oct 20, 2009 | Acer Professional P211 21" CRT Monitor

1 Answer

Vertical pinch on left hand side of crt


You mean the picture on the left side is curved out? Or is it restricted to the very top and very bottom?
If you have the curve problem, look in the menu and see if there is a pincushion control and a pin cushion balance. Adjust the balance until both sides curve the same, then adjust the pin cushion control to remove the curve.
If you are only having the problem in the corners, look in the menu for a corner correction control and play around with it to see if it corrects your problem. If the monitor has no OSD (on-screen-display), then it may be too old to have these controls. You may have to open the unit and see if there are any physical adjustments (little potientiometers). You might want to leave this to someone who knows what they are doing since the high voltage circuit can have 25-35 kV. Considering the price of CRT monitors, you might be able to find a new one for under $50.

Jan 22, 2009 | NEC MultiSync XV17 17" CRT Monitor

2 Answers

Audio balance


if u mean that only left or right channel has audio, then u need to right click on the speaker icon on the bottom right corner, go to properties, in the pannel you can see the balance controls..let me know

Dec 17, 2007 | Balance CM2017 17" Monitor

Not finding what you are looking for?
Acer Professional P211 21" CRT Monitor Logo

364 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acer Computer Monitors Experts

 Elex
Elex

Level 2 Expert

49 Answers

yadayada
yadayada

Level 3 Expert

61037 Answers

John Trigg

Level 2 Expert

250 Answers

Are you an Acer Computer Monitor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...