Question about PC Desktops

1 Answer

Magix website maker 2.0 Can't select a layout because the bottom of the screen with the OK box is missing.

Posted by on

  • 2 more comments 
  • janice_kenne Jan 04, 2009

    Hitting the F11 key doesn't seem to help. The box is where it's supposed to be as I have seen fleeting glimpses of it before the whole layout choice box slides back down the screen!

  • janice_kenne Jan 04, 2009

    Thanks for your suggestions - I'm trying them out as I go. There aren't any options for viewing tools etc at the first stage. I believe that once you've chosen a layout there are lots of changes you can make to the settings but you have to choose a layout first and I can't!




  • Bill Speer
    Bill Speer May 11, 2010

    I looked at their site but haven't got a registration to log in with. It sounds like a toolbar is not staying on top or in view. Have you checked at the top of the screen for layout views or tools to see what has been marked for view and what hasn't?

  • Bill Speer
    Bill Speer May 11, 2010

    Hit the F11 key to expand the screen and remove toolbars. Does that let it show up or is the box not where it is supposed to be?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 617 Answers

Can you shrink the screen with the buttons in the upper right hand corner?If not,hold down the left button of your mouse near the top of the page and pull or push the screen upwards until you can see the OK box.Or try to downsize the screen to your task bar,then right click your desktop screen.In the box select "properties",then pick "settings",in color quality click the pull down arrow and select highest(bit).Your screen will adjust,open the window you just downsized and grab the sides individually and size the screen to your liking by moving top or bottom in or out.If you were already on the Highest setting you can still shrink the screen with the screen resolution by moving the pointer one line to the right.Click apply and OK,the screen will adjust.Bring up your page and move the bottom up to where you can get to the buttons.Then you can go back to the desktop settings and readjust to what you like for settings.After you restart Windows will remember your settings so that you can open pages to the same size and location you set.Settings are only saved if you select Shut down or Turn off and let windows close itself.Please re post if I didn't answer your question to your satisfaction and we'll try something else?

Posted on Jan 03, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My pound sign comes up as # and my @ as "


Windows 7 or Windows Vista
  1. Click Start Collapse this imageExpand this imagevistastartbutton.jpg, type intl.cpl in the Start Search box, and then press ENTER.
  2. On the Keyboards and Language tab, click Change keyboards.
  3. Click Add.
  4. Expand the language that you want. For example, expand French (Canada).
  5. Expand Keyboard list, click to select the English(United States) check box, and then click OK.
  6. In the options, click View Layout to compare the layout with the actual keyboard.
  7. In the Default input language list, click English(United States) - English(United States), and then click OK two times.
  8. In the Regional and Language Options dialog box, click OK. Note The Language bar appears on the taskbar. When you rest the mouse pointer over this bar, a tooltip appears that describes the active keyboard layout.
  9. Click the Language bar, and then click English(United States).

Windows XP
  1. Click Start , type intl.cpl in the Run box, and then press ENTER.
  2. On the Languages tab, click Details.
  3. Under Installed services, click Add.
  4. In the Input language list, select the language that you want. For example, select French (Canada) .
  5. In the Keyboard layout/IME list, click English(United States), and then click OK .
  6. In the Select one of the installed input languages to use when you start your computer list, click English(United States) - English(United States), and then click OK.
  7. In the Regional and Language Options dialog box, click OK. Note The Language bar appears on the taskbar. When you rest the mouse pointer over this bar, a tooltip appears that describes the active keyboard layout.
  8. Click the Language bar, and then click English(United States).

How to make sure that the selected layout matches the keyboard Windows 7 or Windows Vista
  1. Click Start, type osk in the Start Search box, and then press ENTER.
  2. Match the keyboard on the screen with the physical keyboard to make sure that the layout matches.
  3. To check the uppercase characters, click the shift key on the keyboard or on the screen, and match the characters printed on the keyboard.
Windows XP
  1. Click Start, type osk in the Run box, and then press ENTER.
  2. Match the keyboard on the screen with the physical keyboard to make sure that the layout matches.
  3. To check the uppercase characters, click the shift key on the keyboard or on the screen, and match the characters printed on the keyboard.

Jan 07, 2011 | Dell PC Desktops

2 Answers

I can't get the backslash


Please change your keyboard layout to US

1. On the Language bar at the bottom of your screen (next to the clock), click the Input language button, and then select an input language.
mahhek.png
Click the Keyboard layout button, and then select a keyboard layout.

Depending upon your Operating system follow the following steps to change the languages of your keyboard.

Instructions for Windows Vista

  1. Click Start and then Control Panel
  2. In Control Panel, if you are in Classic View, click on Control Panel Home (top left corner)
  3. Open Clock, Language, and Region
  4. Click on Regional and Language Options.
  5. Click the Keyboards and Languages tab and then click Change keyboards.
  6. Under Installed services, click Add.
  7. In the Add Input Language dialog box, select the keyboard layout you would like to add from the list available and click OK.
  8. The keyboard layout you added will be included in the list. To set the new layout as your default, select it from the list. Click OK to save your changes
  9. You can switch between different input languages (= keyboard languages) by clicking on the Language Bar button or by pressing the Alt + Shift keys

Instructions for Windows XP
  1. Click Start and then Control Panel
  2. In Control Panel, if you are in Category View, click on Switch to Classic View (top left corner)
  3. Open Regional and Language Options.
  4. Click on the Languages tab.
  5. Under Text services and input languages, click on the Details button.
  6. Under Installed services, click Add.
  7. In the Add Input Language dialog box, choose the input language and keyboard layout or Input Method Editor (IME) you want to add.
  8. Click OK twice. You should now see a language indicator in the System Tray (located at bottom right hand corner of the desktop by default). You can switch between different input languages (= keyboard languages) by pressing the Alt + Shift keys

Nov 18, 2010 | PC Desktops

1 Answer

Cannot key the at sign after a reload of xp have


on the bottom right of your screen you'll see an (en) clik on that then show the language bar that and it will goto the top of your screen a small box with a triangle and a a minimise box clik on the triangle (options)and then settings then a box will come up you will see usa settings clik on the drop down menu of the box with the language and select your country and language the clik apply...or clik on start then control panel then clik on regional and language option then select your language and country and then clik apply that should work...hope this helps best of luck it should work

Aug 05, 2010 | PC Desktops

3 Answers

My computer is set on a foreign language how do i get it back to english


Instructions for Windows Vista
  1. Click Start and then Control Panel
  2. In Control Panel, if you are in Classic View, click on Control Panel Home (top left corner)
  3. Open Clock, Language, and Region
  4. Click on Regional and Language Options.
  5. Click the Keyboards and Languages tab and then click Change keyboards.
  6. Under Installed services, click Add.
  7. In the Add Input Language dialog box, select the keyboard layout you would like to add from the list available and click OK.
  8. The keyboard layout you added will be included in the list. To set the new layout as your default, select it from the list. Click OK to save your changes
  9. You can switch between different input languages (= keyboard languages) by clicking on the Language Bar button or by pressing the Alt + Shift keys

Instructions for Windows XP
  1. Click Start and then Control Panel
  2. In Control Panel, if you are in Category View, click on Switch to Classic View (top left corner)
  3. Open Regional and Language Options.
  4. Click on the Languages tab.
  5. Under Text services and input languages, click on the Details button.
  6. Under Installed services, click Add.
  7. In the Add Input Language dialog box, choose the input language and keyboard layout or Input Method Editor (IME) you want to add.
  8. Click OK twice. You should now see a language indicator in the System Tray (located at bottom right hand corner of the desktop by default). You can switch between different input languages (= keyboard languages) by pressing the Alt + Shift keys


If a language does not appear in the Input language list, the fonts for that language might not be installed. If that is the case, follow the instructions below.

Add language support
  1. Click Start and then Control Panel
  2. In Control Panel, if you are in Category View, click on Switch to Classic View
  3. Open Regional and Language Options in Control Panel.
  4. Click on the Languages tab.
  5. Under Supplemental language support, select the check box beside the applicable language collection
  6. Click OK or Apply. You will prompted to insert the Windows CD-ROM or point to a network location where the files are located. After the files are installed, you must restart your computer.

Sep 17, 2009 | PC Desktops

1 Answer

Magix Movie Maker manual needed.


INFO: PDF Manual?
An electronic copy of the manual is included with all boxed Magix programs.

You can find this by:

1. Clicking "Start"
2. Then "All programs"
3. Then choose the applicable MAGIX program.
4. The manual is in the "Documentation" folder.

The manual is in the PDF format and so you will need a PDF reader like Adode Acrobat Reader. If you do not have it installed, there is a copy on the MAGIX program CD, or it can be downloaded from the Adobe site.

If you have an e-version of the program you should have been sent an email with a link to the manual.


Article: mkb908072 Author: MAGIX Development (20 June 2007)
GENERAL: Where can I find the manual?
IF YOU HAVE THE BOX VERSION:

You can find a copy of the full PDF manual under "Start" - "All Programs" - "MAGIX" - "Your MAGIX program" - "Documentation"

IF YOU DON'T HAVE THE BOX VERSION:

You can find a link to the manual on the "Help" page:

http://www.magix-website.com/us/faq.212.html
Article: mkb279566 Author: MAGIX Development (16 August 2007)
http://www.magix-online.com/us/help__support/manuals_online_album_and_website_maker.1621.html

Good Luck!

Jul 18, 2009 | PC Desktops

1 Answer

CHANGE LANGUAGE SETTIGS


1.
Click Start, and then click Control Panel.
click-control-panel.jpg 2.
Click Date, Time, Language, and Regional Options.
click-date-time-language-an.jpg 3.
Click Add other languages.
click-add-other-languages.jpg 4.
In the Regional and Language Options dialog box, on the Languages tab, click Details.
click-details-button.jpg 5.
In the Text Services and Input Languages dialog box, on the Settings tab, click Add.
click-add.jpg 6.
In the Add Input Language dialog box, click the Input language list and select your preferred language and dialect. If you want to change the standard keyboard layout, click the Keyboard layout/IME list and select a new keyboard layout. Then, click OK.
add-input-language.jpg 7.
In the Text Services and Input Languages dialog box, on the Settings tab, click the Default input language list, and select the language you will use most often. The language you select as the default will display when you first start your computer.
click-default-input-languag.jpg 8.
To add additional languages, go back to step 5.
- or -
If you have finished adding languages, click OK.
click-ok.jpg 9.
In the Regional and Language Options dialog box, if required, select the Install files for complex script and right-to-left languages and Install files for East Asian languages check boxes.
supplemental-language-suppo.jpg 10.
Click the Regional Options tab. Click the Standards and formats list, and then select your region.
click-standards-and-formats.jpg 11.
Click the Location list, and then select your location
click-location.jpg 12.
Click OK to save your settings.
regional-options-click-ok.jpg arrow_px_up.gifTop of page

Click Here for more info

Apr 26, 2009 | PC Desktops

1 Answer

Laptop key board are messd up


If you have changed the keyboard type in 'regional and language options' you can manually pull of the keys and stick them back on where they should be. It sounds like someone has done that to your keyboard so no regional setting could fix this.
Instructions for Windows Vista
Click Start and then Control Panel In Control Panel, if you are in Classic View, click on Control Panel Home (top left corner) Open Clock, Language, and Region Click on Regional and Language Options. Click the Keyboards and Languages tab and then click Change keyboards. Under Installed services, click Add. In the Add Input Language dialog box, select the keyboard layout you would like to add from the list available and click OK. The keyboard layout you added will be included in the list. To set the new layout as your default, select it from the list. Click OK to save your changes You can switch between different input languages (= keyboard languages) by clicking on the Language Bar button or by pressing the Alt + Shift keys

Apr 16, 2009 | PC Desktops

1 Answer

Keyboard types wrong letter


Hi,

  1. Click Start, and then click Control Panel.
  2. Under Pick a category, click Date, Time, Language, and Regional Options.
  3. Under or pick a Control Panel icon, click Regional and Language Options.

    The Regional and Language Options dialog box appears.
  4. On the Languages tab, click Details.

    The Text Services and Input Languages dialog box appears.
  5. Under Installed services, click Add.

    The Add Input language dialog box appears.
  6. In the Input language list, click the language that you want. For example, English (United States).

    NOTE: When you use the United States-International keyboard layout, you should also use an English language setting.
  7. In the Keyboard layout/IME list, click United States-International, and then click OK.
  8. In the Select one of the installed input languages to use when you start your computer list, click Language name - United States-International (where Language name is the language that you selected in step 6), and then click OK.
  9. In the Regional and Language Options dialog box, click OK.

    Notice that the Language bar appears on the taskbar. When you position the mouse pointer over it, a ToolTip appears that describes the active keyboard layout. For example, United States-International.
  10. Click the Language bar, and then click United States-International on the shortcut menu that appears.
Thanks,
Armymason

Mar 02, 2009 | Dell Dimension 4600 PC Desktop

3 Answers

On the Acer One laptop, how do I select UK English keyboard Not US?


Instructions for Windows Vista
  1. Click Start and then Control Panel
  2. In Control Panel, if you are in Classic View, click on Control Panel Home (top left corner)
  3. Open Clock, Language, and Region
  4. Click on Regional and Language Options.
  5. Click the Keyboards and Languages tab and then click Change keyboards.
  6. Under Installed services, click Add.
  7. In the Add Input Language dialog box, select the keyboard layout you would like to add from the list available and click OK.
  8. The keyboard layout you added will be included in the list. To set the new layout as your default, select it from the list. Click OK to save your changes
  9. You can switch between different input languages (= keyboard languages) by clicking on the Language Bar button or by pressing the Alt + Shift keys

Instructions for Windows XP
  1. Click Start and then Control Panel
  2. In Control Panel, if you are in Category View, click on Switch to Classic View (top left corner)
  3. Open Regional and Language Options.
  4. Click on the Languages tab.
  5. Under Text services and input languages, click on the Details button.
  6. Under Installed services, click Add.
  7. In the Add Input Language dialog box, choose the input language and keyboard layout or Input Method Editor (IME) you want to add.
  8. Click OK twice. You should now see a language indicator in the System Tray (located at bottom right hand corner of the desktop by default). You can switch between different input languages (= keyboard languages) by pressing the Alt + Shift keys
If a language does not appear in the Input language list, the fonts for that language might not be installed. If that is the case, follow the instructions below.

Add language support
  1. Click Start and then Control Panel
  2. In Control Panel, if you are in Category View, click on Switch to Classic View
  3. Open Regional and Language Options in Control Panel.
  4. Click on the Languages tab.
  5. Under Supplemental language support, select the check box beside the applicable language collection
  6. Click OK or Apply. You will prompted to insert the Windows CD-ROM or point to a network location where the files are located. After the files are installed, you must restart your computer.

Nov 11, 2008 | Acer PC Desktops

1 Answer

I have a Sony VGN-NR430D laptop.I just got it. I cannotfigure out this keyboard. I get aÉ for a qustion mark I get aÈ for another one. I just canèt figure out how to use it and canèt...


I'm assuming it's a standard british keyboard

Click Start
Control Panel
Regional and Language Options
Languages
Details

If UK or UK Extended isn't selected click Add
Select your language and keyboard layout from the list
Click OK
Your keyboard should now show up in the box
Click the non-UK Keyboard setting
Click Remove
Click Apply then OK

Settings may not change until you restart.

If your keyboard isn't the standard UK layout, check your manual or the Sony website to find out which it is.

Aug 22, 2008 | Sony PC Desktops

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Are you a PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...