Question about Yamaha DVR-S200 DVD Player
My satellite remote gives the following codes for Yamaha DVD player... 737, 738, 739. These codes did not work with my player and scanning the remotes memory for a code did not work either.
If anyone has managed to get the DVR-S200 to work with a universal remote please let me know what code you used.
SOURCE: remote code
This can be a frustrating process! I have had similar problems in the past, but perseverance is key!
Please be sure that you did all of these tricks:
1 Be sure to press and HOLD down the appropriate input button while pressing the AV power button for 3 full seconds.
2 Enter the code. Unfortunately, you may have to try all of the codes listed for your manufacturer. There are 23 for Phillips! There are "only" 8 for RCA, so you might try that compnent first.
It sounds like you are doing the right things, but is it possible that you are accidentally hitting a wrong button during the process? ie; using the TV power button instead of the AV power button? After completion of the task, are you then hitting the proper component button, such as DVD before trying to use the remote to control that device?
I apologize if you have tried all of these things, but I am not sure of your level of expertise! Good Luck!
Posted on Jan 01, 2008
SOURCE: YSP-800 - remote code..
so you want to use your remote that you use for your tv with the unit and not the remote that came with it to use with your cabe?
if you are wanting to use the remote that came with the unit here are the following remote codes, or please state the universal remote that you are using the model ect ushally found on the battery cover or inside the battery cover.
here is the origional owners manual for you as well
I uploaded it to my server for you.
Posted on Aug 02, 2008
30176 is the code you need . Press Aux and then hold setup until Aux lights up. Enter code. If you want the remote to control the receiver all the time, press Aux and then hold setup until Aux lights up. Enter 993 then press Aux. Aux will flash, now press Cbl and Aux should light up when you use the volume.
Posted on Jul 06, 2009
Tips for a great answer:
Jan 19, 2016 | HP bd-2000 blu-ray player with 1080p...
Nov 09, 2015 | Pioneer Televison & Video
Jan 25, 2015 | RCA Televison & Video
May 17, 2014 | Pioneer DVR-RT500 DVD Recorder/VCR
Turn on a desired device (e.g.,VCR or DVD player) and, if
applicable, insert media (e.g., cassette or disc).
NOTE: Please read steps 2 through 4 completely before proceeding.
Highlight or write down the codes and device you wish to program
before starting step 2.
On the remote control,press a device key once (i.e., DVD/VCR,
NOTE: To program control of a VCR, PVR (or DVR),TV/VCR Combo,
or TV/VCR/DVD Player Combo press DVD/VCR once.After programming
a VCR Combo device, you will be able to control channel selection,
volume, and VCR functions.
NOTE: To program control of a DVD Player,DVD Player/VCR
Combo, or TV/DVD Player Combo, press DVD/VCR once.After programming
a DVD Combo device, you will be able to control channel
selection, volume, and DVD functions.
NOTE: To program control of a Cable Box, Cable Box/PVR (or DVR)
Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR)
Combo, press CBL/SAT once.
Press and hold SET until the LED (red light) blinks twice,
then release SET.
4. Use the Manufacturer's Codes (starting on page 18) to
locate the type of device and brand name and then enter
the first four-digit code for your device. If performed correctly,
the LED will blink twice.
NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter
the same code again.
Aim the remote control at the device and press POWER
once.The device should turn off. If it does not, repeat
steps 2 through 5, trying each code for your brand until
you find one that works. If it still doesn't work, try
Searching For Your Code on next page.
NOTE: If the device does not have a POWER key, press PLAY
Repeat steps 1 through 5 for each device you want to control.
For future reference,write down each working device
code in the following boxes
Jul 13, 2011 | One For All URC-3300 Remote Control
Feb 12, 2011 | One For All URC-4021 Remote Control
May 23, 2009 | Syntax Olevia 537H Television
Jan 28, 2009 | LG BH100 Blu-Ray Disc Player
Feb 19, 2008 | GPX D1816 DVD Player
54 people viewed this question
Usually answered in minutes!