Question about RCA Universal Remote Control
I have the RCA D771 universal remote. I programmed the TV, combination VCR/DVD player, and satellite (Dish Network using the Aux 1 button) and everything is working fine for that. But I can't figure out how to switch it over to play a video game system. I have a couple of systems that get attached to the TV, so I'd rather not just have one respond to the universal remote if possible. (I did try to get the Wii system to respond using the "Aux 2" button, and that didn't work--it reprogrammed the VCR/DVD player.) On the old remote, we have a "video input" button that you pushed to switch it over, but there's nothing similar here. I tried holding TV and antenna, TV and WHO-input; neither worked. I don't have an RCA TV--it's a Sanyo. Can you help please? Thanks so much!
You are going to have to order a origanal remote that came with the TV to do this because the universal remote does not have the game mode feature! Go to www.remotes.com to order yours!
Please rate my answer and help keep this site FREE!
Posted on Jan 02, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Feb 14, 2016 | Audiovox RCR6473R Universal Remote Control...
Jan 23, 2016 | RCA Televison & Video
Jan 25, 2015 | RCA Televison & Video
Jun 07, 2012 | Audiovox Rca RCRN04GR Universal Remote...
0154, 0236, 0463, 0180, 0178,
The One For All 4 Device Universal Remote Control is preprogrammed at
the factory to operate an RCA TV, a Toshiba DVD player, a Motorola cable
box, and an RCA VCR.To control devices other than the default brands,perform
the following steps; otherwise skip this section:
 Turn on a desired device (e.g.,VCR or DVD player) and, if
applicable, insert media (e.g., cassette or disc).
NOTE: Please read steps 2 through 4 completely before proceeding.
Highlight or write down the codes and device you wish to program
before starting step 2.
 On the remote control,press a device key once (i.e., VCR/PVR,
DVD, CBL/SAT,or TV).
NOTE: To program control of a VCR, PVR (or DVR),TV/VCR Combo,
or TV/VCR/DVD Player Combo press VCR/PVR once.After programming
a VCR Combo device, you will be able to control channel selection,
volume, and VCR functions.
NOTE: To program control of a DVD Player,DVD Player/VCR
Combo, or TV/DVD Player Combo, press DVD once.After programming
a DVD Combo device, you will be able to control channel selection,
volume, and DVD functions.
NOTE: To program control of a Cable Box, Cable Box/PVR (or DVR)
Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR)
Combo, press CBL/SAT once.
 Press and hold SET until the LED (red light) blinks twice,
then release SET.
 Use the Manufacturer's Codes (starting on page 18) to
locate the type of device and brand name and then enter
the first four-digit code for your device. If performed correctly,
the LED will blink twice.
NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter
the same code again.
 Aim the remote control at the device and press POWER
once.The device should turn off. If it does not, repeat
steps 2 through 5, trying each code for your brand until
you find one that works. If it still doesn't work, try
Searching For Your Code on next
NOTE: If the device does not have a POWER key, press PLAY
Sep 26, 2011 | One For All URC-3021 Remote Control
Sep 28, 2009 | RCA 20F610TD TruFlat TV/DVD
Dec 18, 2008 | Televison & Video
Mar 21, 2008 | Televison & Video
Dec 04, 2007 | One For All URC-3021 Remote Control
155 people viewed this question
Usually answered in minutes!