Question about Samsung SF-750 Plain Paper Laser Fax

1 Answer

Changing the time in the display screen.

How can I change the time in the display screen. It is currently showing 90 minutes behind the actual time.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 or more questions within one hour.

  • Samsung Expert
  • 166 Answers
Re: Changing the time in the display screen.


Posted on Sep 23, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Please can you tell me how to change time and date. thank you. Wendy

The current time and date are shown on the display when the machine is on and ready for use (standby mode). The time and date are printed on all faxes you send.
Note: If power to the machine is cut off for over 30 minutes, when power is restored, the machine prompts you to reset the time and date.
1. Press Setup. The display shows the first setup menu; FAX NUMBER/NAME.
2. Press left arrow or right arrow until 'TIME/DATE SETUP' appears, then press
Start/Enter. The display asks you to choose a date format.
3. Press Start/Enter.
4. Press left arrow or right arrow until you find the desired date format, then press
If you select USA, the time and date appears in the order of month, day, then year. The EUROPE format will be displayed in the order of day, month, then year.
The display shows the currently set time and date using the selected date format.
5. Enter the correct time and date using the number keypad.
Day = 01~31
Month = 01~12
Year = four digits
Hour = 00~23
Minute = 00~59
You can also use left arrow or right arrow to move the cursor under the digit you want
to correct, then enter a new number.
6. Press Start/Enter when the time and date on the display is correct. If you enter an invalid number, the machine beeps and does not proceed to the next step. If this happens, just reenter the correct number.
The display shows the time and date you have set, then returns to
Standby mode.
06-25-1999 12:30 ('USA' type)

Nov 25, 2010 | Samsung SF-5100 Plain Paper Laser Fax

1 Answer

Replaced Drum Cartridge - Alarm light still on and still says "replace Drum Cartridge. How do I reset?


Try this procedure, it should help fix the problem,
Turn Printer off. While holding down Enter and Menu keys, power the printer on. You should see PCU Diag Mode displayed. Hit Menu key 6 times till Counter Set is displayed. Hit Enter key Dev xxxxx displayed, left 3 numbers are blinking. Hit (down triangle symbol) till numbers are 000. Hit Menu key, right 2 numbers are blinking. Hit (down triangle symbol) till numbers are 00. Hit Menu key. Drm xxxxx displayed, left 3 numbers are blinking Repeat steps 7-10. Dev tm xxxxx displayed. Repeat steps 7-10. Drm xxxxx displayed. Repeat steps 7-10. Life xxx displayed. Life should be set to 005. Hit Menu key. TNL xxx displayed. TNL level should be between 90-110, if you have problems, try changing TNL. Hit Enter key Counter Set is displayed. Hold down Form Feed key and insert blank paper into manual feed slot. You should get a beep confirming reset. Power printer down and back up, you are done.

Oct 06, 2010 | Sharp FO-4400 Fax

1 Answer

Fax machine Samsung Inkjet Fax SF-360. Ink was finished so ordered the correct ink cartridge and replaced it now on the screen it tells us to install ink cartridge. I have tried severeal times and i know...

If the Toner Low/Empty message does not automatically clear when a new cartridge is installed, use the following to clear the message manually:
1.Press MENU # 1 9 3 4. The machine should display TECH.
2.Press MENU, and ENTER. The machine should display TECH Mode.
3.Press the left arrow < once. The machine will show NEW CARTRIDGE.
4.Press ENTER, the machine will show YES.
5.Press ENTER, there should not be any Toner Low/Empty message.
6.Exit TECH MODE, press MENU # 1 9 3 4. The machine will no longer display TECH.
If Toner Low/Empty message continues, there may be a problem with the toner cartridge or the machine.

Jul 21, 2010 | Samsung SF-5100 Plain Paper Laser Fax

1 Answer

The little read out screen is showing jibberish instead of the date and time. It was fine yesterday. We turned it off for a few minutes, then we unplugged it for a few minutes but niether one fixed it....


Open the cover that has the display on it and look at the backside of it.
You will see the display connector. Make sure that the connector for the display is plugged in securely, then turn the machine back on.


May 11, 2010 | Toshiba DP-85F Fax

1 Answer

How do I change the time stamp heading- when I send a fax it shows the wrong month , year, date and time

1. Press <function> then the "Down Arrow" below the <start> button until [ENTRY MODE] appears.
2. Press "Right Arrow" below the <start> button until [DATE&TIME SET] appears.
3. Press "Right Arrow" (current set date will appear).
4. Enter two digit number for day. (To correct a mistake press "Left Arrow")
5. Enter a two digit number for the month.
6. Enter the four digit year.
7. Enter the two digit number for the hour, then two digit number for the minute.
8. Press <start/memory> (The display will read [POLL SECURITY])
9. Press <stop> to exit.

Mar 11, 2010 | Sharp UX-B750 Inkjet Fax

1 Answer

Message reading change drum soon permanently on screen. changed the drum as no printing could be seen, ie paper blank. however, still got the change drum message on the screen. how do i get rid of this?

7 Wait until the time, date and answering mode appear on the display. Then press the SELECT FUNCTION key. ecblank.gif ecblank.gif ecblank.gif ecblank.gif 8 Press the 7/COUNTER DISPLAY One-Touch key. The display will show DRUM COUNT. ecblank.gif ecblank.gif ecblank.gif ecblank.gif 9 Press 2.413c?openelement&fieldelemformat=gif to clear the image drum unit
counter. ecblank.gif ecblank.gif ecblank.gif ecblank.gif 10 Press the SELECT FUNCTION key to finish. ecblank.gif

Dec 03, 2009 | OKIFAX 4500 Plain Paper LED Fax

1 Answer

Resetting the name of company and telephone number on fax sheet

Welcome to FixYa! I'm the expert that chose your issue to resolve. Now let's get started. Office machines, for whatever reason, seem to be a lot more complicated than the ones you use at home. But, this should be an easy problem to fix. The process of putting in your required and company information is known as "registration" To complete your registration do the following:

  1. Press Function, then
  2. Data Registration, then
  3. Press set three (3) times. Your current settings will be displayed.
  4. Use the numeric keypad to enter the correct month, day, year and time in the following order: Year (enter only the last two digits), Time (use 24 hour time format i.e. 13:00 vs. 1:00, precede single digits with a zero (0) i.e 01:00) If you make a mistake press clear. Also, you can use the left/right arrows to move the cursor under just one digit and use the number keypad to change it.
  5. Press set two times. The display will show UNIT TELEPHONE, the TEL=
  6. Use the number keypad to enter your fax/telephone number (max 20 digits including spaces) If you want to enter spaces, press function, then space. If you make a mistake, press clear and reenter the number. You can also use the right arrow key to delete the rightmost digit and re-enter the number.
  7. Press Set twice. Unit will display UNIT NAME on 1st Press, then on the 2nd press a blank screen (not totally blank, it will have a cursor on the left and a A: on the right.
  8. Use the numeric pad (corresponding to letters printed on keys) to enter the company name (max 24 characters including spaces).
  9. Press Set (Unit will display TX TERMINAL ID)
  10. Press Stop/Reset to return to the standby mode.
Note: if you want to check that what you put in is what you want, you can print user data list. Here's how:

  1. Press function, then:
  2. Press report (unit will display ACTIVITY REPORT)
  3. Use up/down arrows to select USER DATA LIST.
  4. Press Set once, the list will be printed.
(information above from Canon)

That's about it....I imagine that in a busy office, it's hard to find time to read through a book just to do this stuff, but I have the time.

Thanks for using!

P.S. - If you find that the solution/answer I provided led you to, or resulted in a fix, please close the ticket with a FixYa! rating. I would be very grateful for your show of appreciation.
If it hasn’t, please do not assign a rating just yet. Please post back as to what steps you took, results, etc, and I will try to assist you further. I am at your service.

Jan 20, 2009 | Canon FAXPHONE L80 Laser

4 Answers

Brother Intellifax 2920 / How to reset Drum Life ?

1.Open the front cover.

2.Press the options key on the control panel. The display will show

3.Press 1 to reset the drum count.

4.Close the front cover.

Aug 18, 2008 | Brother FAX-2920 Plain Paper Laser

1 Answer

Cannot read LCD display

No the display must be replaced. This is a common problem with that model!

Jan 02, 2008 | Canon LaserClass 9000L Plain Paper Fax

Not finding what you are looking for?
Samsung SF-750 Plain Paper Laser Fax Logo

Related Topics:

129 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Fax Machines Experts


Level 2 Expert

166 Answers

Kevin Cole

Level 1 Expert

45 Answers

Paul King
Paul King

Level 3 Expert

727 Answers

Are you a Samsung Fax Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides