Question about Linksys Wireless-G WRT54GS Router (e125894)

1 Answer

Connecting wrt54gs to rv042 on LAN port

Hi, i have this problem of connecting my wrt54gs on rv042 on lan port. the rvo42 in connected to my dsl. and i want my wireless nodes to connect to wrt54gs and make rv042 as a gateway. but i could never make it work . please could anybody help me..

Posted by on

  • Jay-R Barrera
    Jay-R Barrera May 10, 2007

    ok thank you so much , i appreciate it.
    how could i initiate a chat session with you sir?

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 113 Answers

I would love to help you on this, however, I would need some more information. Also, this requires some advanced troubleshooting steps which cannot be dictated here. I would request you to initiate a chat session with me from the homepage and we can move forward from there. Thanks

Posted on May 10, 2007

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Linksys RV042 Router and AT&T Static IP's


How were you advised you have 5 more sticky IP addresses? Are you talking about LEGAL IP addresses? If so, all you need to do is program your PC with one of the addresses manually and set the router as your default gateway. I assume you know your DNS server details? If not, use Google free ones 8.8.8.8 and 8.8.4.4.
I hope you have firewalls on your systems!

Mar 15, 2010 | Linksys RV042 VPN Router

2 Answers

Lost login and password


The only way to obtain the password would be to use "cracking" software (i.e. brute-force or dictionary attacks). Usually not worth the effort, much quicker to reconfigure the router.

Jan 19, 2010 | Linksys RV042 VPN Router

1 Answer

Driver


not sure why you will need USB drivers for your adsl2+ modem/ wireless router and 4 port LAN switch. It would help you had provided the model number.

The device uses a LAN ethernet port to connect to the computer. You will need atleast one computer to be on the LAN port for setting it up. Once setup is complete you can use wireless connection for every computer.

The user manual & drivers or the DSL-2740B which appears similar to your product description
http://www.dlink.com.au/tech/Download/download.aspx?product=DSL-2740B

Not sure if you need these. Your computers will need LAN or wireless drivers to connect to this DLINK modem/ router.

Good luck

Dec 25, 2009 | D-Link ADSL2/2+ Modem/Wireless Router...

1 Answer

I have a cisco linksys wrt54g2 v1 that I have hooked up to my verizon dsl modem. My computer says I am connected but it wont let me get on the internet. If I plug the ethernet cable from the modem to my...


Connect the cable from the LAN port on the DSL modem to any of the 4- LAN ports on the Linksys Swicth (not the port Labelled Internet), then from any of the remaining 4 ports then connect your computer. Also try using a cross-over cable to modem from the DSL LAN port to the Linksys.

Oct 24, 2009 | Linksys Wireless-G WRT54G Router

1 Answer

Trying to connect a wired network wirelessly to a router


No. You'll need to run a "cross-over" Ethernet cable from one of the "LAN" ports on the "downstairs" router, connecting to the "WAN" port on another router that you will need to buy, and place "upstairs", and connect the 4 devices to the 4 "LAN" ports.

Or, run a long "straight-through" Ethernet cable from your DSL-modem (or cable-modem) that is "downstairs", and move your wireless router "upstairs", and connect the 4 devices to the router's "LAN" ports.
Your laptop "downstairs" should still be able to connect (wirelessly) to the wireless-router that is "upstairs".

Sep 16, 2009 | Gateway Belkin 54g Wireless DSL/Cable...

1 Answer

This is my situation; I have a hard wire connection from my wall phone/DSL outlet to a Westell model C90 DSL router/modem. Since this allows for only one single hard wire connection to one desk top (I have...


So you are connecting the DSL Modem output to the D-Link's LAN port 1, right? In this case, you should connect the DSL Modem output to the D-Link's WAN Port, which is between the power input and the LAN outputs.

If it doesn't work that way, check this out:
http://www.voipmechanic.com/westelltobridge.htm

Aug 24, 2009 | Computers & Internet

1 Answer

DSL line disconnects on WRT54GS only


Try to change the LAN IP address of your router to 192.168.2.1 by accessing the router's Setup page. You also need to set your Westell modem to "full-bridge mode". You need to ask assistance from your ISP to bridge the modem. After that, set-up the Linksys router to PPPoE then power cycle it.

Apr 15, 2009 | Linksys Wireless-G WRT54G Router

1 Answer

Connecting a wireless router to Tiscalli broadband connection


  1. USB modem is connecting a PC USB port with a DSL phone line: CANNOT be connected to a ROUTER LAN (ethernet NOT USB port).
  2. Wireless ROUTER is NOT a modem and it CANNOT connect the Internet (or WAN) LAN port to any "phone line"
  3. Connect the Router Internet (WAN) port to Modem (you need a LAN MODEM = a modem with a LAN/ETHERNET port)
  4. Be sure your internet is running before strting ROUTER configuration with Router Company CD

Jan 05, 2009 | 3Com 7760 (3CRWE776075US) 802.11a/b/g...

1 Answer

My husband unplugged my router from the DSL box. I have been messing around with it but don't remember how to add my router. I know it sounds simple but I'm lost. I fixed the connection to the DSL box...


most router normally have one or two WAN connection port and one LAN connection port.

if you are connecting your desktop with the available LAN port then you need a hub or switch to create multiple connection .

alternatively if your router have two LAN port make sure you are using the right ip address and the proper gateway address(from your isp)

Apr 20, 2008 | Computers & Internet

2 Answers

WRT54GS DEVICE-NO INTERNET CONNECTIVITY


You didn't specify if you're using DSL or cable internet.

With DSL, keep in mind the software1.gif on the PC is what "dials out" to the ISP with your name / password, and you MUST set the name and password in the router. Otherwise, ONLY the computer that has the software installed (verizon, etc) will be able to connect.

Also, make sure that ONLY the LAN is connected from the router to the modem, and not both the USB and LAN.

If you're using a cable connection, you don't have to do this, however, most newer Linksys routers come with a 'setup' disk, which MUST be used regardless of connection type.

Oct 09, 2007 | Linksys Wireless-G WRT54G Router

Not finding what you are looking for?
Linksys Wireless-G WRT54GS Router (e125894) Logo

Related Topics:

137 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2269 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

mark

Level 2 Expert

108 Answers

Are you a Linksys Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...