Question about Protron PLTV-32 Television

3 Answers

Protron television remote control

The remote control to our Protron got dropped on the floor yesterday causing the batteries to pop out. Now it isn't working at all. Is there something to check for in the remote to see if it can be fixed or are there options for replacing the remote control for this brand of television? Thanks

Posted by on

  • Anonymous Mar 18, 2009

    I have the same problem. My remote stopped working 3 months after ai purchased the tv. Called Protron every month and was told month after month the remote was on back order,it has been 2 year ans still no remote.Can a universal remote be programed? Please someone help.

×

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had a 32 in Protron , finally replaced it yesterday, couldn't get a picture on it, but I was on here looking for solutions and saw people that needed the power cord and remote so I kept them. If you would like them email me at smr_62@hotmail.com and put I need your Protron accessories in the subject box and tell me where I can send them.

Posted on Jun 18, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

No universal will work.. I'm making a remote for this TV that people can buy on ebay-- by july 1st 2007 search ebay for pltv-32 remote and you will find a programmed, ready to go remote for less than $25 that will work well with other devices (comcast cable box, sony audio systems, etc..)

Posted on Jun 22, 2007

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,462 Answers

You can get universal remotes from an elec shop and program them in to your make

Posted on May 09, 2007

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Remote not work


Seems to me you may have dirt either on the eye of the remote or on the component, unless a small wire inside the remote has come off due to use ( example...dropping the remote on the floor) if you have a separate Universal remote (you can get them for under $20 and you can always take it back to the store if unneeded [...Walmart works]) and try playing with that and see that it's not the component and that your problem is with the remote. Good Luck and I hope it works out for you.

Dec 15, 2013 | BestPriceCables Iview 2000KII Professional...

1 Answer

I dropped my dvd remote and now it won't work


need to know the model of the DVD player and remote to be able to further assist you...but a quick google search with that model # and the phrases "program codes" and "how to" should quickly bring up a how to article or manual for the dvd player with reprogramming instructions.

Nov 04, 2012 | Toshiba Se-r0301 Q152 Remote Control

1 Answer

Dropped my remote on floor and now no buttons work


your batterys probably got loose inside the remote. take the battery cover off and push them back into place.

Jul 13, 2012 | Samsung TV Remote Control

1 Answer

The remote doesn't work. Need a new one or universal control.


Remote codes for universal remotes are 0178, 0003, 0052. If you need a 3-digit code, drop off the leading zero on each code.

May 09, 2011 | Protron PLTV-32 Television

1 Answer

Have a protron pltc-26 and the remote qiut working put in fresh batteries but will not turn on tv


The remote control is dead or the remote CPU chip that control all functions is dying and only some of functions buttons will work,some wouldn't anymore or the rubber insulater between the rubber buttons and the remote circuitry board are worn out and make no more contact.Can u take the remote aparts?Yes.Check all the rubber butttons insulater see if they're still good.Tries clean the remote PC circutries board with some rubbing alchahol also the battery - + connections too.Wait like about 20 mins for the rubbing alchahol to completely dries.Putting it back together again an putting in new batteries,the remote control might work again.If not have same result.Try website like Remotes.com to buy an original or very close compatible remote for a replacement.

Mar 23, 2011 | Protron PLTV-26 26 in. HD-Ready LCD...

1 Answer

Looking for a remote control that replaces the protron pltv-3750. I want to make sure it controls tings on the tv like video source, pip, swap, volume, etc...Aside from the Logitech Harmony 360 LCD Remote...


Try fixing your old remote control.
Take off the battery, open the back of your remote, lift the circuit board, clean the green painted part with cotton balls slightly damp with rubbing alcohol as well as the black thingy behind your remote pad, let it dry put it back together, replace with a new battery and try if it works.

Jun 11, 2010 | Protron PLTV-26 26 in. HD-Ready LCD...

1 Answer

Changed batteries and remote stiil not working


Hi,

The Original Remote has been Discontinued for this Model.

If you wish to Buy a Substitute, you could buy it from ;-

http://remotes.com/store/protron/pltv3250.html

If you Want Original, you could Buy a Used One from :-

http://cgi.ebay.com/PROTRON-SPECTRONIQ-PLTV-3250-PLTV3250-TV-REMOTE-CONTROL-/220578781622?cmd=ViewItem&pt=LH_DefaultDomain_0&hash=item335b8519b6

Let me know,if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

May 03, 2010 | Protron PLTV3250 32 in. LCD Television

1 Answer

I drop my dish remote control on the floor and it dont work,, want should i do


klylovexyou

If you dropped your remote and it ceased to work, you might check the batteries to make sure they are seated securely in the battery compartment. If they are, press the select button on the remote to see if any buttons on the top of the remote lights up. If they don't you will need a new remote. You can call 1-800-333-3474 and speak with Tech Support. I hope this helps.

Ray Calo
DISH Network

Dec 23, 2009 | DISH Network IR Remote Control

1 Answer

After the unit was dropped on the floor the RF feature no longer works.


the RF module plugs into thr main board so it has probably popped out. Open the case and plug it back in again.

Nov 18, 2009 | Logitech Harmony 890 LCD Remote Control

Not finding what you are looking for?
Protron PLTV-32 Television Logo

230 people viewed this question

Ask a Question

Usually answered in minutes!

Top Protron Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2334 Answers

The Knight
The Knight

Level 3 Expert

75157 Answers

Cindy Wells

Level 3 Expert

5337 Answers

Are you a Protron Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...