Question about GE JVM1653 Microwave Oven

1 Answer

Microwave fan not working all of the time.

I have a GE Space saver JVM1443BK02. Recently I noticed when I use the microwave I do not hear any fan running. When you 1st start it the fan will run then it seems to slow down and I hear a humming noise. Any ideas?

Thanks Ron

Posted by on

  • rlheaton Jan 20, 2009

    I Tested the Magnatron cooling fan with 110v. Still ran slow. I ordered a new fan $79. and installed. All working now. The problem was the old fan prop was loose on the shaft. The lock tight material that locks it to the shaft must have lost its grip allowing the fan to spin free. That is why the fan would run slow. So if any one has this same problem Check the fan prop. You will need to remve the whole fan unit to check. Hope this helps.

  • Anonymous Mar 20, 2014

    Microwave had been for 25 minutes shut down no power

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

Could be loose wire or shaken off?

Posted on Jan 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ge space saver microwave oven Model number HVM1540SN2SS. Interior fan turns on when door is open. This just started yesterday. Please help


The possible issue may be some door sensor broken or work abnormal. Double check three door sensors, especially for two door sensors who are working on normal close state.

Nov 02, 2015 | GE Microwave Ovens

1 Answer

Replace mounting nuts on a GE undercabinet microwave


Depending upon where inside the microwave the nut dropped, it may be necessary to open the cabinet to retrieve it.

Jan 01, 2014 | GE JVM1440 Microwave Oven

1 Answer

GE SPACE SAVER JVM1490BH THE FAN RUNS ALL THE TIME. HAVING TO LEAVE DOOR OPEN TO STOP.


I would say you have a faulty door switch. Replace the door switch that is faulty.
Hope that helps.

Jan 03, 2011 | GE Microwave Ovens

1 Answer

Microwave will not heat


Hi,


Here is a tip that will help you to figure out what is wrong with your Microwave Oven....

Basic Microwave Oven Troubleshooting Tips

heatman101


l'l'l'l'l'l'l'l'l'l'l'l'

Aug 01, 2010 | GE Spacemaker JVM1640SJ Microwave Oven

1 Answer

GE space saver Microwave not heating


Hi,
Here is a tip that will help you to figure out what is wrong with yourMicrowave Oven....

Microwave Oven Basic Troubleshooting Tips

heatman101

\

Jun 13, 2009 | GE Spacemaker JVM1640SJ Microwave Oven

1 Answer

Reset shows on display of my GE space saver microwave oven


change the board that has the reset on the display board it is bad

Mar 27, 2009 | GE Spacemaker JVM1640SJ Microwave Oven

1 Answer

Code on the space between oven and microwave


It's normally about 30", but that info will be in either the installation manual or the owner's manual, depending on the brand you choose.

You mention SpaceSaver, that's GE.

You can download GE owner's manuals and installation instructions here.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Feb 04, 2009 | GE Spacemaker JVM1640SJ Microwave Oven

1 Answer

GE Microwave vent fan replacement


(I'm assuming you're talking about the hood / vent / exhaust fan instead of the internal magnetron cooling fan).

The part # SMV-260UA-C will not be enough to go on, as there at least 3 variations on that number shown at Samsung parts.

These microwaves are made by Samsung, but you'd need the GE part number to replace the whole thing. They don't sell the blades separately.

The part # for the "ventilation motor" is WB26X10042 and you can find it for $97.11 here, which is about fifty dollars less than direct from GE.

I may have available a replacement flan blade off a used unit. If you'll send me the dimensions, I'll check. I need the length of the fan blade, the diameter, and the inside diameter / shaft size, and whether the shaft is round or "D" shaped.

Please feel free to contact me directly.

We're happy to help you and we'd appreciate your thoughtful rating of our answer.

William E. Miller, AS-EET
prototech@usa.net
http://www.microwavedisplay.com

Jul 24, 2008 | GE Spacemaker JVM1640SJ Microwave Oven

1 Answer

Space between door hinge and microwave


It will have to be checked by a technician with meter for microwaves to be sure.

Oct 08, 2007 | GE JVM1630 Microwave Oven

Not finding what you are looking for?
GE JVM1653 Microwave Oven Logo

Related Topics:

213 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

8820 Answers

Devabhakthuni...
Devabhakthuni...

Level 2 Expert

224 Answers

D. E. Hev

Level 3 Expert

1059 Answers

Are you a GE Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...