Question about D-Link RangeBooster G WBR-2310 Wireless Router (WBR2310)

1 Answer

How do i set up my user name and password - D-Link RangeBooster G WBR-2310 Wireless Router (WBR2310)

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 83 Answers

Look on the label with the S/N on it and look for H/W Ver A1 or B1 THEN CLICK ON THE CORRECT LINK BELOW FOR THE MANUAL FOR THAT PARTICULAR ROUTER. This will tell you everything you need to know.

Product Support Resources for WBR-2310 Revision B

Product Support Resources for WBR-2310 Revision A

Emulator - click here to preview the web-based configuration wizard

Posted on Jan 02, 2009

4 Suggested Answers

rahul26485
  • 611 Answers

SOURCE: user name and password

Configuring Windows XP PCs
The following instructions assume you are running Windows XP with the default interface. If you are using the
Classic interface (where the icons and menus look like previous Windows versions), please follow the
instructions for Windows 2000.
1. Click the Start button and then the Control Panel icon. Click the Network and Internet Connections icon.
Then click the Network Connections icon.
2. Select the Local Area Connection icon for the applicable Ethernet adapter (usually it is the first Local Area
Connection listed). Double-click the Local Area Connection. Click the Properties button.
3. Make sure the box next to Internet Protocol (TCP/IP) is checked. Highlight Internet Protocol (TCP/IP), and
click the Properties button.
4. then you give the this ip address in box 192.168.1.52 subnet mask 255.255.255.0 and defaultgatway is 192.168.1.1
then give ok,ok,ok


after then you go to the start>run>type ping 192.168.1.1 -t after then enter its reply come then you go to the
internet exploere in the address bar type 192.168.1.1 end enter
then ask you user name and password
admin and admin.
then configure it.

Posted on Aug 11, 2008

NextStepComp
  • 185 Answers

SOURCE: Manual says

if it asks for a password to get in but doesn't list a password leave them blank. If it is asking you to set a password and name enter whatever you can remember.

Posted on Jan 01, 2010

  • 116 Answers

SOURCE: What's default password and user name for Actiontec GT704WG

Default username is admin.
Default password is password.

I hope this helps!

Posted on May 13, 2010

Testimonial: "Thanks for the right answer!"

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Which Default Passwords Are Used on S Series Switches?


On the S series switches of all versions:
· When you log in a switch through a console port, no default user name or password is provided. The system asks you to set the user name and password when you log in to the switch for the first time.
· Before you log in to a switch through Telnet, create a Telnet account.
· You can set the Telnet login authentication method in the VTY. If the password authentication mode is configured, set a password in the VTY. If the AAA local authentication mode is configured, set the user name and password in the AAA view. If the remote AAA authentication mode is configured, set the user name and password on the AAA server.

May 27, 2016 | Huawei Computers & Internet

Tip

Gprs & MMs settings for india mobile networks 2


&gt;IDEA GPRS SETTING <span> </span> <span> </span>#Account Name - Idea GPRS <br /> <span> </span>#Username - <br /> <span> </span>#Password - <br /> <span> </span>#Homepage - http://wap.ideafresh.com <br /> <span> </span>#Proxy and Server Port - 8080 <br /> <span> </span>#Proxy and Server adress - 10.4.42.45 <br /> <span> </span>#Databearer - GPRS / Packetdata <br /> <span> </span>#Acces Point Name - imis <br /> <span> </span>#Proxy - Enabled/yes <br /> <span> </span>#Authentication Type - Normal<span> </span> <br /> <span> </span>&gt;IDEA MMS SETTING <br /> <br /> <span> </span>#Connection name - IDEA_MMS <br /> <span> </span>#Databearer - GPRS <br /> <span> </span>#APN - mmsc <br /> <span> </span>#User name - <br /> <span> </span>#Prompt password - No <br /> <span> </span>#Password - <br /> <span> </span>#Authentication - http://10.4.42.21:8002 <br /> <span> </span>#Proxy serv. address - 10.4.42.15:8080 <br /> <span> </span>#Proxy and server Port - 8080 <br /> <span> </span>&gt;VODAFONE GPRS SETTING <br /> <span> </span>#Account Name: Vodafone_gprs <br /> <span> </span>#Homepage: http://live.vodafone.in <br /> <span> </span>#User Name: <br /> <span> </span>#Pass: <br /> <span> </span>#Access Point Settings: <br /> <span> </span>#Proxy: Enabled <br /> <span> </span>#Proxy Address: 10.10.1.100 <br /> <span> </span>#Proxy Port: 9401 <br /> <span> </span>#Data Bearer: Packet Data <br /> <span> </span>#Bearer Settings: <br /> <span> </span>#Packet Data Access Point: portalnmms <br /> <span> </span>#Network type: IPV4 <br /> <span> </span>#Authentication: normal <br /> <span> </span>#User Name: <br /> <span> </span>#Password: <br /> <span> </span>&gt;VODAFONE MMS SETTING <br /> <span> </span>#AccountName:- vodafone <br /> <span> </span>#Server:- http://live.vodafone.com <br /> <span> </span>#Proxy:- 196.006.128.012 <br /> <span> </span>#Proxy Port:- 8080 <br /> &gt;BSNL GPRS SETTING <br /> <span> </span>BSNL PORTAL <br /> <span> </span>#Account Name - Bsnl Portal <br /> <span> </span>#Username - <br /> <span> </span>#Password - <br /> <span> </span>#Proxy - Enabled/yes <br /> <span> </span>#Acces Point Name - celloneportal <br /> <span> </span>#Homepage - wap.cellone.in <br /> <span> </span>#Proxy and Server Adress - 192.168.081.163 <br /> <span> </span>#Proxy and Server Port - 8080 <br /> <span> </span>#Data Bearer - GPRS / Packetdata <br /> <span> </span>#Authentication Type - Normal <br /> <span> </span>BSNL NORTH <br /> <br /> <span> </span>#Account Name - BSNL GPRS <br /> <span> </span>#User Name - <br /> <span> </span>#Password - <br /> <span> </span>#Proxy - Enabled/yes <br /> <span> </span>#Homepage - http://petercrys.com <br /> <span> </span>#Proxy and Server address - 192.168.051.163 <br /> <span> </span>#Proxy and Server Port - 8080 <br /> <span> </span>#Acces Point Name (postpaid) - www.n.po <br /> <span> </span>#Acces Point Name (prepaid) - www.n.pr <br /> <span> </span>#Data bearer - GPRS/ Packetdata <br /> <span> </span>#Authentication Type - Normal <br /> <br /> <span> </span>BSNL SOUTH <br /> <span> </span>#Account Name - BSNL GPRS <br /> <span> </span>#User Name - Your mobile no <br /> <span> </span>#Password - <br /> <span> </span>#Proxy - Enabled/yes <br /> <span> </span>#Homepage - http://localhost/home.wml <br /> <span> </span>#Proxy and Server address - **** <br /> <span> </span>#Proxy and Server Port - 8080 <br /> <span> </span>#Acces Point Name - bsnlsouth <br /> <span> </span>#Data bearer - GPRS/ Packetdata <br /> <span> </span>#Authentication Type - Normal <br /> <br />

on Jan 11, 2011 | Cell Phones

2 Answers

Forget user name and password how to set up new ones


You may have to resent the router for that purpose! User name and password are usually default for each router. If you have not set up a user name or password try default admin in password section and leave user name blank. If you have set up a user name and password and forgot now then you may have to reset the router by pressing reset button on back of router for 30 to 60 seconds which brings back factory default settings for the router!

Sep 12, 2011 | Computers & Internet

1 Answer

How do i set a password


Router's password could mean 2 things. First password for you to open router's configuration page or password for you to connect wireless to your router.

Configuration's password:
-Logon to your router configuration page
-Please to the TOOLS and ADMIN Tab. You there you can change the admin user name and password. If you do not have the user name and password, please check for the default user name and password on the router's manual. If default user name and password won't work reset the router. Press and hold down the reset button or pinhole on the back of the router for 10 seconds. Then re-enter user name and password again. It should work this time.

Wireless Security Password:

-Logon to your router configuration page
-Under SETUP and Wireless Settings tab you will get an option to change the wireless password

May 21, 2011 | D-Link DIR-615 Wireless Router

1 Answer

Don't understand how to set password. please help


Plug the router into the power socket and configure you own machine to obtain IP address automatically. Load up Internet explorer and type in http:/192168.xxx.xxx which is the local address of your router. You should then get a password screen. Enter default user name and password and it will take you to the configuration screen. The full IP address and user name and password are dependant on which model you have. See list below From there you need to read the instructions very carefully and match it with the information provided by your ISP.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response. Happy Holidays!

Thanks, Joe
? Q: What is the default IP address, username, and password for routers? ? A


ZSR0104
192.168.8.1
Administrator password: admin

ZSR0104M
192.168.1.1
Login password: No Password

ZSR0104B
192.168.1.1
User Name: admin
Password: 0000

ZSR0104AS-01
192.168.8.1
Administrator password: No password

ZSR0104E
192.168.2.1
Login password: No Password

ZSR0104CP (Grey color)
192.168.1.1
User Name: admin
Password: admin

ZSR0104CP-05 (Blue color)
192.168.10.1
User Name: guest
Password: guest

ZSR0104WE-01
192.168.2.1
Login password: No Password

ZSR0104WE-04
192.168.2.1
User Name: admin
Password: 1234

ZSR0104WE-05
192.168.1.254
User Name: admin
Password: 1234

ZSR1104WE
192.168.2.1
User Name: Empty
Password: Empty

ZSR0104DE
192.168.2.1
Login password: No Password

ZSR0104FS
192.168.1.1
User Name: admin
Password: admin

ZSR0104UP
192.168.1.1
User Name: admin
Password: 0000













Dec 22, 2010 | Zonet Computers & Internet

1 Answer

I want to change password for wifi network


1
Open up an Internet browser window on your computer system. To gain access to the default settings, type in the default IP address of the wireless router in your Internet browser's address bar and press enter. You must refer to the wireless router's documentation or navigate to the manufacturer's website for the correct IP address.

2
Type the default user name and password in the security dialog box that appears, then press Enter on your keyboard. Because different router manufacturers use different default user names and passwords, refer back to your router's documentation or support webpage for the correct information.

3
Navigate through the router administration pages to find the wireless router's administrator password settings. Change the default user name and password to a unique set so that possible unauthorized access to your router settings will not take place. Make sure to hit "Save Settings" to complete the change.

4
Set up your wireless security settings by navigating to the proper administration settings page. By default, wireless routers do not come with a password for connectivity access. Choose the appropriate wireless security level you need and type in a unique user name and password. Save these new settings and log out of the router's administration setup.

5
Write down the user names and passwords for both network access and the administration setup page. Keep these user names and passwords in a safe place.

Thanks.
Have a great day.

Oct 14, 2010 | Computers & Internet

1 Answer

Can't enter "admin" as user name to setup router.


by default "admin" is the user name and the password is blank. If this does not work, try admin as the user name and password as the password. if the same thing, it can mean that another password and user name has been set up. You may have to reset the router to its factory settings, usually, there is a small hole or button that you can press to reset to factory settings.

Sep 16, 2010 | D-Link AirPlus DI-524 Wireless Router

1 Answer

No internet connection it is a unlock phone from t mobile to att


Hai, Go into Web Sessions and change the Internet and MMS settings to those appropriate for AT&T. If the T-Mobile settings are locked, create new settings and make them the the default. Each carrier has its own setting but those settings are the same for any phone on that carrier's network.
Browser Settings (in web sessions): ---------------------------------------------------------------------------------------------------- Name: Cingular Wireless Internet
Homepage: http://device:home or http://device.home Service Type 1: WAP Gateway IP 1: 66.209.11.61 Port 1: 9201 Domain 1:  Service Type 2: WAP Gateway IP 2: 000.000.000.000 Port 2: 9201 Domain 2:  DNS 1: 000.000.000.000 DNS 2: 000.000.000.000 Timeout: 15 minutes CDS No. 1:  User Name 1:  Password 1:  Speed (Bps) 1: 9600 Line Type 1: Modem CDS No. 2:  User Name 2:  Password 2:  Speed (Bps) 2: 9600 Line Type 2:  GPRS APN: wap.cingular User Name: WAP@CINGULARGPRS.COM Password: CINGULAR1 ------------------------------------------------------------------------------------- MMS Settings (in web sessions):
Name: Cingular MMS
Homepage: http://mmsc.cingular.com Service Type: WAP Gateway IP 1: 66.209.11.61 Port 1: 9201 Domain 1:  Service Type 2: WAP Gateway IP 2: 000.000.000.000 Port 2: 9201 Domain 2:  DNS 1: 000.000.000.000 DNS 2: 000.000.000.000 Timeout: 15 minutes CDS No. 1:  User Name 1:  Password 1:  Speed (Bps) 1: 9600 Line Type 1: Modem CDS No. 2:  User Name 2:  Password 2:  Speed (Bps) 2: 9600 Line Type 2:  GPRS APN: wap.cingular User Name: WAP@CINGULARGPRS.COM Password: CINGULAR1 ------------------------------------------------------------------------------------------------ MMS Settings (in Message Center>>>Message Setup>>>MMS Message Setup): Hide fields: Cc.Bcc.Priority Autosignature: Download: Automatic Filter: Expire After: 5 days Reply Type: MMS Size Limit: None Server Info: Cingular MMS>>>Select Server Info>>>Current Server>>>New: Service Name: Cingular MMS
Server Name: http://mmsc.cingular.com Web Session Name: Cingular MMS.
Some settings may not have to be entered for all phones because they are set at the default for those models. You can leave the User Name and Password fields blank.

Aug 04, 2009 | Motorola Mobility RAZR V3i Cellular Phone

1 Answer

Ricoh Aficio 3228C asks for user name and password


What is the user name and password refering to?

if it is the administrator user name and password try

user name - admin
password -

blank password.

good luck

Jun 30, 2009 | Ricoh Office Equipment & Supplies

1 Answer

Lost security code for D link wireless router


Lonin to your router as user pass is also user then copy your all informaiton and reset your after rerseting your router then as u want to can configure your router if u can not configure ask some of your friend to help you

Oct 12, 2007 | Linksys Wireless-G Broadband Router

Not finding what you are looking for?
D-Link RangeBooster G  WBR-2310 Wireless Router (WBR2310) Logo

Related Topics:

146 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18344 Answers

Mike

Level 3 Expert

4332 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...