Question about EliteGroup ECS G31T-M Motherboard - Quad Core Support, Intel G31, Audio, Video, PCI Express, 10/100 Ethernet LA

2 Answers

Motherboard boot up problem

Ok i just got my g31t m motherboard new today with a intel e8500 1333fsb cpu and two sticks of 2 gb 800mhz each memory patriots running nothing else on the board just using the onboard video nothing in the pci for right now .. so i have everything connected properly i turn my rig on and the very first screen that shows up is the motherboard screen were it shows the cpu speed the memory ammount and then it freezes cant use the keyboard to press del. for setup cant do anything .. it will not go past that first screen to even get into the bois... any suggestions?

Posted by on

  • dellswg Jan 04, 2009

    i actually got it lol but thank you and ya it was the bois

  • sam9824 Mar 07, 2009

    I bought two of these combo’s from ebay the first is

    Details
    ECS G31T-M motherboard
    Intel duo2 3.0 GHz processor
    4gbtes topram
    Nividia 1 gig pcie video card
    Sound blaster audigy pro

    Work’s fine

    Second is the

    ECS G31T-M motherboard
    E8500 3.16 duo processor
    4gbtes topram
    Nividia 1 gig pcie video card

    Hangs on boot trying to enter setup or boot
    Doesn’t even register the h/d’s sata or ide or the DVD drive
    But is see’s that it’s the 3.16 GHZ Duo and the 4GHZ of TopRam

    Would it read these if it was the wrong bios

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The reason is the bios does not recognize the e8500 chip. If you bought the combo from Fry's, just take the whole thing (case and all) to Fry's and they'll flash your bios for free. After the bios is updated to at least the 7/17/08 version everything should work okay.

Posted on Jan 04, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

Try clearing the cmos bios on the board there is a jumper on it

Posted on Jan 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ms 7529


Hello here are the supported cpu list for your mainboard:

http://www.msi.com/product/mb/G31M3-F-V2--3-Audio-Ports-.html#/?div=CPUSupport

You maybe have to upgrade the bios to support the new cpu.

May 25, 2012 | Intel Motherboard

3 Answers

I want to upgrade my system ram size to 2gb...my system memory configuration as follows mother board: intel102ggc2 system bus speed :800mhz processor (p4):3.0ghz ram slots available:2 and presently i'm...


The below is the contents of Intel published for your board
Intel Desktop Board D102GGC2 Technical Product Specification
System Memory The board has two 240-pin DIMM sockets and supports the following memory features: • 1.8 V (only) DDR2 SDRAM DIMMs with gold-plated contacts • Unbuffered, single-sided or double-sided DIMMs with the following restriction: Double-sided DIMMS with x16 organization are not supported. • 2 GB maximum total system memory. • Minimum total system memory: 128 MB • Non-ECC DIMMs • Serial Presence Detect • DDR2 533 or DDR2 400 MHz SDRAM DIMM
hope it helps, if so rate the solution

Nov 16, 2010 | Intel D102GGC2 Motherboard

1 Answer

Cpu failure Light Stays On Cant Boot To Post Start up Asus P7p55


Check your power supply. Sounds like a bad or insuffecient power supply.

Mar 22, 2010 | ASUS P7P55D PRO Motherboard

2 Answers

What are the compatible processor for asus p5p800 mx


Asus P5P800-MX Motherboard Features

64bit CPU support
64-bit computing, the next generation technology to replace current 32-bit architecture, delivers advanced system performance, faster memory access and increased productivity. This motherboard provides excellent compatibility and flexibility by supporting either 64-bit or 32-bit architecture.
Intel EM64T
Intel EM64T (Intel Extended Memory 64 Technology) allows processors to run newly written 64-bit code and to access larger amounts of memory, which delivers exceptional graphic performance and higher data processing speed. Digital media applications can take advantage of Intel EM64T in high quality video and audio processing as well as 3D rendering.
Intel EIST
Intel EIST (Enhanced Intel SpeedStep technology) automatically adjusts Intel 64-bit processor voltage and core frequency according to system performance demand, establishing a self-managed, lower-power consumption, less heat and quieter environment. Combined Intel EIST and ASUS Q-fan technology (adjusts fan speeds according to system loading), this motherboard provides excellently quiet, cool and efficient platform for Intel lovers.
Intel 865GV chipset
Leveraging the Intel 865GV chipset to support P4 CPU on 800MHz FSB, Dual-channel DDR 400 memory, Intel Hyper-Threading Technology, and a full-range of advanced features, P5P800-MX really delivers a full-value, high-performance solution for today's most demanding tasks.

Intel LGA775 Pentium 4 CPU
This motherboard supports the latest Pentium 4 CPU from Intel in LGA775 package. With 800MHz FSB, 1 MB L2 cache, Hyper-Threading Technology and core-speeds up to 3.6GHz and beyond, Intel's LGA775 Pentium 4 is one of the fastest desktop processors to date.

Jul 27, 2009 | ASUS Computers & Internet

1 Answer

List of compatible x64 cpu's for motherboard Asus P5P800-MX


Leveraging the Intel 865GV chipset to support P4 CPU on 800MHz FSB, Dual-channel DDR 400 memory, Intel Hyper-Threading Technology, and a full-range of advanced features, P5P800-MX really delivers a full-value, high-performance solution for today's most demanding tasks. This motherboard supports the latest Pentium 4 CPU from Intel in LGA775 package. With 800MHz FSB, 1 MB L2 cache, Hyper-Threading Technology and core-speeds up to 3.6GHz and beyond, Intel's LGA775 Pentium 4 is one of the fastest desktop processors to date. Dual-channel DDR technology doubles the bandwidth of your system memory and hence boost the system performance to out perform any memory existing solutions in the market.

May 30, 2009 | ASUS P5P800-MX Motherboard

1 Answer

No boot up / no post for new CPU (ECS G31R-M7) with Intel E5200


i have a ecs g31t-m with a pentium e5200 dual core. i bought the board from ebay and the bios needed to be flashed before it would reconize the processor. after flashing the bios i still had the same problem. i found that in the user manual there is a list of "qualified" ram. before looking at this list i tried some ram that was not on the list and it wouldn't boot. after changing the ram to one that was on the list it finally booted up. however, after getting it to boot and reloading win xp, i cant get any drivers to load for the onboard equipment. so now i'm stuck. i hope this helps and if someone can give me direction on the drivers i'd be in good shape.

Apr 05, 2009 | EliteGroup ECS G31T-M Motherboard - Quad...

2 Answers

I have gigabyte series g31 m-es2L i want use memory pc 5300.... it's support with this mainboard ???? tx pls reply to : it_mid@yahoo.com


Hi,

First, clarification: the closest Gigabyte model is GA-G31M-ES2L... there is no "g31 m-es2L"

For this kind of question the easiest way to find the answer is from the manufacturer: Gigabyte

A quick search of their products results in:

http://www.giga-byte.com/Products/Motherboard/Products_Spec.aspx?ClassValue=Motherboard&ProductID=2889&ProductName=GA-G31M-ES2L

which states that up to 800mhz DDR2 (PC6400) is supported
( 667mhz (PC5300) is also supported. )

Generally with motherboards, if a higher speed of memory is supported, the lower speeds are also supported.

PS: mhz times 8 yields the PCxxxx number, PCxxxx divided by 8 yields the mhz number


Feb 09, 2009 | Gigabyte Matx Intel G31 775 DDR2-800...

1 Answer

¿Could it work with 2 Cards RAM of 1G/800? ¿Could PC work with this mother board and 2 Cards RAM of 1G/800?


That's a pretty big jumb from 667 to 800MHz. (Motherboard does not support 800MHz).
Manual says:
This motherboard accommodates two memory modules. It can support two 240-pin
DDR2 667/533/400. The total memory capacity is 2 GB.

Yet, ECS web site says it supports up to 4 GB.
http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=830&CategoryID=1&DetailName=Feature&MenuID=44&LanID=0

BIOS for 945GCT-M/1333 (PCB:3.x) version 08/07/18 does not include information pertaining to increased memory speed up to 800MHz. (Bios link).
http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=830&CategoryID=1&DetailName=Bios&MenuID=44&LanID=0

Mike


Nov 17, 2008 | EliteGroup ECS 945GCT-M/1333 Motherboard -...

1 Answer

1333 FSB processor ( E6850 ) on a 1066 FSB motherboard, DDR2 667 memory


Hi proenza. you're making good sence! You're D945GCL MB should be able to run 1066 FSB. Not 100% sure you're memory will keep FSB up to 1066.
Here's the trouble though. The Intel Core 2 Duo E6850 will not run on the Intel D945GCL motherboard because it is not supported. Look here at Intel's web site. Supported CPU's.
http://processormatch.intel.com/CompDB/SearchResult.aspx?Boardname=d945gcl

Intel E6850 specs sheet. http://www.dealtime.com/xPF-Intel-Intel-Core-2-Duo-E6850-Processor-3-0GHz-4MB-Cache-1333MHz-FSB-Conroe-Dual-Core-OEM-Socket-77

Intel E6700 spec sheet. http://www.dealtime.com/xPF-Intel-Core-2-Duo-E6700-2-67Ghz

This CPU is supported by the D945GCL MB.
http://processormatch.intel.com/CompDB/SearchResult.aspx?Boardname=d945gcl

Intel Core 2 Duo E4700 Processor BX80557E4700 - 2.60GHz.
$149.99
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=3826343&CatId=2396

In order to get 1066MHz (CPU can run at), you'll also need the memory support at 800MHz. The D945GCL MB can only run DDR2-667MHz.
Many people buy a CPU to run MB's specs (1333MHz) just to find the same MB does not support DDR2-1066MHz or DDR2-800MHz. Motherboard Mfg's are lagging. DDR3-1333MHz is out there now to support the 1333 MHz CPU FSB.
http://www.lagoom.com/KINGSTON_1G_DDR3_1333MHZ_PC3-10667/KVR1333D3N9_1G/partinfo-id-580235.html

I hope this has helped you make a decision proenza.

Good Luck!

Mike

Jul 17, 2008 | EliteGroup ECS 945GCT-M/1333 Motherboard -...

1 Answer

OS does not boot


Hello there.

Most likely the new stick(s) of memory is causing problems in your system. To verify this i would remove the newly added ram and see if the problem goes away.

Also you can download and run a memory test called 'memtest86+' from here. This can be burned to a cd and booted from the computer, to run a diagnostic on the new memory.

Hope this helps.

Apr 15, 2008 | Intel BLKD915GAVL (BLKD915GAVLX10U)...

Not finding what you are looking for?
EliteGroup ECS G31T-M Motherboard - Quad Core Support, Intel G31, Audio, Video, PCI Express, 10/100 Ethernet LA Logo

Related Topics:

271 people viewed this question

Ask a Question

Usually answered in minutes!

Top EliteGroup Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Mark Taylor
Mark Taylor

Level 3 Expert

728 Answers

David
David

Level 3 Expert

756 Answers

Are you an EliteGroup Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...