Question about Whirlpool Duet GHW9150P Front Load Washer

1 Answer

F22 code machine won't work! What now?

I have a F22 code machine won't work! What now?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 91 Answers

F-22 USUALLY MEANS LONG DRAIN,,IF IM NOT MISTAKEN,, REMOVE BOTTOM 3 SCREWS FROM PANEL ,U SHOULD SEE PUMP .,, REMOVE CLOCKWISE AND CLEA OUT PUMP,, JUST REMEMBER STILL HAS ABOUT 3 GALLONS OF WATER EVEN THOUGH LOOKS EMPTY

Posted on Jan 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have bosch classixx 6 washing machine with F22 code flashing ?


How to reset Bosch Classixx 1400 Express


hi,couldn't find too much detail about the fault , may be faulty brushes an commutato......the abovel ink gives details and how to reset after f22 message

good luck
r

Jul 09, 2015 | Bosch Washing Machines

1 Answer

Whirlpool Duet wfw9400 is giving me a f22 error - door won't lock. I can't see any problem. Suggestions?


The F22 is a door lock error. When the control senses the door has not locked after six attempts F22 will be displayed.

There may be detergent on the door lock mechanism keeping it from locking. I recommend cleaning the moving parts of the door lock. Also make sure the wiring connections from the CCU (Central Control Unit) to the door lock are tight and in good condition.

If you have a volt/ohm meter and are comfortable working around live electricity I can give you a few checks that will help you diagnose the problem. I have included a wiring diagram that will help you locate theses connectors (see below). I have also included detailed testing information to help with your diagnosing. Always unplug or de-energize electrical equipment before removing covers or attempting service. Be careful and wear appropriate hand protection when working around sharp metal parts.

  • Check VAC (Voltage Alternating Current) at IF2.
    • You should have 120VAC, if not check the wiring.
  • Check VAC at DS2.
    • You should have 120VAC, if not check the wiring and if good replace the CCU.
  • Check VAC at DLS2.
    • You should have 120VAC, if not check the wiring and if good replace the door lock assembly.

Aug 23, 2012 | Whirlpool GHW9400 Front Load Washer

1 Answer

Whirlpool Duet Washer F22 Error Code Follow-up


1) F22 mean DOOR LOCK ERROR , this problem can be a) switch for open or defective b) loose wires or broken wires, test by continuity VOM .
2) adjust the Door vs switch very well for propely closed, and test the closed switch.
3) see if the color are missing and put in the WRON terminal.

God bless you

Jun 28, 2012 | Washing Machines

2 Answers

Error code f22 whirlpool duet wash cycle


f22 is a door lock error try this hit cancel turn your dial to another setting, hit start and once it starts hit cancel again and it should unlock. thats what i did anyway.
If you're getting an F22 error, you will want to check anything to do with the door latch switch.

Mar 14, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Whirlpoo; wfw9200 F22, F28, A17 A27 error codes


f22 is a door lock error and f28 is a commication error you still have warranty thorugh whirpool. you're going to need pro. help

Dec 13, 2008 | Whirlpool Duet GHW9150P Front Load Washer

2 Answers

F22 Error Code


TAKE 3 SCREWS OUT THAT HOLD THE BOTTOM FRONT PIECE REACH UP BEHIND AND ON THE DOOR LOCK MECHANISM THERE IS A ROUND PLASTIC DOOHICKEY PULL IT DOWN ABOUT 1/2 AN INCH OR AS FAR AS YOU CAN AND IT WILL UNLOCK THE DOOR. I WOULD UNPLUG UNIT FIRST. I DON'T KNOW ABOUT THE F22 THING. MY JUNKER DOES THE SAME THING PERIODICALLY, I UNPLUG AND REPLUG IT TO CORRECT

Sep 08, 2008 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

F22 code appears on Kenmore Elite Front Load washing-?


communication error between control board and panel. Make sure both are replaced together. common problem

May 27, 2008 | Kenmore Elite 45986 Front Load Washer

1 Answer

Whirlpool washer F22


thats a door lock failure code try unplugging the washer then let me know shut the door firmley before operating

Mar 28, 2008 | Washing Machines

Not finding what you are looking for?
Whirlpool Duet GHW9150P Front Load Washer Logo

308 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...