Head and mic set does not work in usb drive on ps2
Bought a pc usb head phone and mic set comes with driver disc tried to use on ps2 for socom us navy seal game and it does not work at all. I have a friend who used a pc set and it woked. cannot figure it out. I turned off system plugged in to usb port on ps2 and turned system on nothing then I tried and plugged it in after ps2 was all ready on I am using it for online games
An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert whose answer got voted for 20 times.
An expert who has written 20 answers of more than 400 characters.
Re: head and mic set does not work in usb drive on ps2
I recommend just going to get a Logitech USB Hedset at wal-mart, but it will set you back 30 bucks. I have Socom 3 and Socom Combined assualt, it works on both without having to use a setup disc, just plugin and play!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
realtech hd is your sound device. go into windows control panel and access the sound settings then navigate to voice settings click the volume button,your mic might be muted. also if you want the headphones to work plug them into the plug that your speakers are using (side-note: mics and head phones never need something installed to work as long as your sound device works and your definitely does work,only when the mic is a special interface like USB do you need to install software and/or drivers)
If you are running Vista, make sure that you set your mic as the default. Then check on vent settings and make sure that your output setting are set for your head set. You can then test your headset inside of the settings tab.
From my experience to sync the BT with this headset, there is a problem with the headset. Sometimes if you carefully bend the mic wand (mouth piece) backwards with even pressure it will connect to the phone. Eventually this fix will not work any longer, but it is a temporary quick fix. I threw mine away and bought a better one with no moving parts. I hope this helps and good luck.
Logitech headsets do not come with drivers. If this is a wireless headset, it could be that you are receiving interference from other wireless appliances. If you have a wireless phone, this could be the source of your interference. Researching the headset, it does run at a 2.4 Ghz, so make sure your wireless phone isn't on the same frequency, if you have one at all. Also, this is a bluetooth accessory, class 2, meaning you can't be more that 30 feet away from the usb adapter that's plugged into your computer. Also make sure that you don't have a ton of items plugged into your USB ports on you PC, as this can drain some of the power from the USB port and not supply the correct amount to your adapter. You could also try plugging in the usb adapter to a different USB port on your PC, just to make sure the port itself is not faulty. I hope some of this helps.
cant help much but ill try
dissconect all the wires and check their pins
all intact, straight, and good
check especially the mic connector
connect them all and make sure there's a click on hook up
more then that cant help