Question about Sony SA-VA10 System

1 Answer

Sony SA-VA10 I have a Sony SA-VA10 that I bought in 1996. I was recently robbed and the robbers destroyed and took off with the custom 13-pin cable connecting the L and R main speakers. Since it's custom I've been having a terrible time finding one to replace it. I hate to just chunk the whole system since it still works fine...

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi, Have you been able to locate the cable for your Sony speaker system? Thats a shame that they would take just the cable. Anyways, I have the sa-va10 model just like you. I just upgraded to a new sound system. And I have the cable. Tho, I m sure somewhere on the net, like ebay, amazon or even Sony should be able to help you. I would call them. Those speakers are not that old, and maybe Sony still has a ton of those cables in stock. Esp. since the system is only around 14 years old. Relatively thats still pretty new.

Posted on Apr 26, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I got a set of Sony SA-VA15s from a yard sale. They didnt come with the 13 pin ribbon cable. Will the left speaker work without this cable? I tried to hook it up and nothing.


no you need the ribbon this connects the all together to get the sound usless with it get in touch with sony tell them what you haver they usuall have spare parts they will send you a new one, worth a try if not ebay is the answer

May 04, 2014 | Audio Players & Recorders

1 Answer

ATM PIN Number Reversal - Good to Know !!


Yes from what I hear this is the case .

Mar 02, 2017 | Computers & Internet

1 Answer

I have no operating manual fpr the Panasonic SA-AK17


The SA-AK17 is a component of the SC-AK17 system. You may download a copy of the SC-AK17 manual at http://service.us.panasonic.com/OPERMANPDF/SCAK27.PDF

Oct 27, 2013 | Sony SA-VA10 Shelf System

1 Answer

Sony SA-VA10 Shelf System Powered Monitor Speakers. Constant Buzz .. around 1K . .sounds like power supply. Not attenuated by increase in amp volume. Help


Secondly sounds like the power supply filter capacitor has gone bad. Write down the value off the label and purchase one at your local electronics parts place. It will only be two solder leads to unsolder and solder back. But first check the other place for that symptom, an open ground near the input jack going into the amplifier, or broken input wire/plug.

May 19, 2010 | Sony SA-VA10 Shelf System

2 Answers

How to fix 13 pin cable for GK-2A....


You must be making an error in splicing the cable.
Possible problems:

1. There is an overall shield that you have cut and not restored.

2. You tried to add cable length and did not use the same exact cable. For some stuff, the cable is MORE than just connecting wires... we may have twisted pair that MUST be used for certain lines in the cable. Or a tiny coaxial cable with a shield.

3, Failure to connect the correct wires.

4. Poor soldering and insulating resulting in broken connections or shorted connections.

5. Exceeding the length that the circuitry is capable of driving.

Nov 14, 2009 | Music

1 Answer

13pins "from the inside monitor" "to the VGA 15 pins connector


hai dear,
i checked your problem and found that you open the cover of monitor and you find the two jack of data cable in main pcb and neck card( 2 connector of data cable).plz you cut the connector of data cable and you will find 8 wires in connector.related red(invild extra ground),green(invild extra ground),blue(invild extra ground),black gnd,white,orange,gold(extra gnd) and now you cut the red wire, you will find two wires.so you refix the main red wire pin no-1 of connector and red gnd pin no-6,green main wire pin no-2 and green gnd pin no-7,main blue wire pin no-3 and blue gnd pin no-8.check for the horizental sync and vertical sync wire you should go in main pcb which invild the other connector. there is present in print, h- sync(two wire of h- sync main wire in pin no-13 and other pin no-5) and ver.-sync wire in pin no-14.first you will check the whose h-sync and vert-sync in color and now finally other wires will fix any pin of connector.

Apr 03, 2008 | SAMTRON 55V 15" CRT Monitor

1 Answer

13pins "from the monitor" "to 15 pins VGA connector"


You will have wires of 7 colours. Solder it as per the data below...

White 7
Red 6
Black 10
Yellow 9
Blue 12
Green 1
Brown 13

The pins are numbered as follows

4 3 2 1
8 7 6 5
12 11 10 9
13

Apr 02, 2008 | SAMTRON 55V 15" CRT Monitor

Not finding what you are looking for?
Sony SA-VA10 System Logo

Related Topics:

560 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Audio Players & Recorders Experts

kakima

Level 3 Expert

102366 Answers

 Grubhead
Grubhead

Level 3 Expert

4861 Answers

The Knight
The Knight

Level 3 Expert

72670 Answers

Are you a Sony Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...