Question about Gateway EV 910 19" CRT Monitor

2 Answers

I have a new Dell Studio 540 computer and I'd like to hook it up to my Gateway EV910 monitor. I connected everything correctly. The monitor has power, turns on to the monitor self test screen where it tells me everything is okay with the monitor and then the monitor goes to power save mode. I think that I need to put a Gateway driver on the Dell in order to get it to recognize and communicate with my monitor. How do I do that? Where do I get the driver? Help!

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 61 Answers

It should recognize it immediately, and the only problem that i can think of would be your graphics card not supporting it.
Here is the driver for it: http://support.gateway.com/s/MONITOR/7001267/z01267nv.shtml

Posted on Jan 02, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 155 Answers

You dont need to install a driver for the monitor. The power save mode message appears when the monitor is not able to get a signal from the computer. Make sure the the vga/blue cable is securely plugged to the back of the pc.

note: Inspect the back of your studio. You may have two blue ports where you can connect the monitor, if you do, connect the monitor to the one at the bottom half of the computer.

Posted on Jan 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i connect my dell 540 to a receiver?


The audio output jacks on the back of your computer are for 5.1 speaker setup. Meaning that you have a speaker array of 2 front side speakers, 1 center speaker, 2 rear left and right speakers and a sub-woofer speaker. Here is a link to the set-up giude of your computer:

ftp://ftp.dell.com/Manuals/all-products/esuprt_desktop/esuprt_studio_desktop/studio-desktop_Setup%20Guide_en-us.pdf

Feb 16, 2013 | Dell Studio 540 MT Pentium DualCore E5300...

1 Answer

Power comes on fan runs hard drive spins but monitor says : monitor self test.. your monitor is working correctly... check computer power and monitor cable... it was working fine the night before ...


try and boot in safe mode and check the frequency, it should be 60 htz if nothing it's possible your video card has gone out, do you have a second monitor to test?

Jul 10, 2012 | HP Pavilion 514n PC Desktop

1 Answer

Dell Studio 540 MT No connection from PC to


in this case it is probably the video card ...so ..if you have a on board one ...just move the cable to it..(its placed near the other on board plugs like usb and printer plug ) but you may need to remove the faulty card from the computer in order to let the on board one to work ...also try to see if it is not just a case of plugging the card better in the slot ..or so ...there can not be anything else cause if the monitor says there is no signal this is the only issue possible..if the computer starts ....

Jun 15, 2010 | Dell Studio Slim-Tower Desktop Computer

1 Answer

Overall color change (greenish) 10 seconds at a time with multiple computers


It is due to dry soldering on the crt board. Try to resolder all the dry joints on the crt board.

May 23, 2009 | Gateway EV 910 19" CRT Monitor

4 Answers

My monitor says there is no signal from my new Dell Studio


Try reseating the video card in your new computer. Sounds like it may not be seating in the slot properly. Take it out and put it back in with the power off and then hook everything back up and then see if you get video,.


Mar 14, 2009 | Dell Studio Slim-Tower Desktop Computer

1 Answer

No signal on monitor


You probably have 2 monitor connections. you have a standard one, and one that is through a graphics card at the bottom of your tower. Check for that second connection and switch the plug.. that should solve it.

Jan 02, 2009 | Gateway FPD1975W 19" LCD Monitor

1 Answer

Dell monitor


See the link below. White cable is better than blue. Don't connect both!

http://support.dell.com/support/topics/global.aspx/support/dsn/en/document?c=us&docid=306F260F75DAB073E040A68F5B284E6F&l=en&s=gen

Dec 22, 2007 | Gateway FPD2275W LCD Monitor

Not finding what you are looking for?
Gateway EV 910 19" CRT Monitor Logo

108 people viewed this question

Ask a Question

Usually answered in minutes!

Top Gateway Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18385 Answers

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Are you a Gateway Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...