Question about Grundig GF70-600 TV

1 Answer


I have an old grundig 14" tv. no remote came with it. Can't figure out how to tune it from the TV. pressed all the buttons to no avail. The model number is; P40-342CTI/GB. Anybody know how to tune this tv?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 55 Answers

For tune your grundig you must use remote control

Posted on Dec 10, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

How do i tune it to a video channel i have 8 ground channels and would ideally like to use no. 9 for video but have had no luck tuning it.

Select Cn 9 and press manual search whilst you are playing a video. Kepp searching until the video playing appears on your screen then press store.
I take it you have the RF link lead between the Video RF out and the TV aerial Socket otherwise it won't work.

Jan 02, 2011 | Grundig GF70-600 TV

2 Answers

Grundig Televition (P37 830 Text) shows only one channel with an

hello, I had thesame problem. I tried everything, after 14 days, where was TV off a tried the same problem: text " ATS... OK " So a tried hold 3seconds on Grundig driver button "OK" and then the started automatictunnig. After it - averything is function! :)

May 03, 2010 | Grundig GF70-600 TV

3 Answers

How to tune universal remote rm-300f+ to my tv

How to do an auto search for a Livewire Rm-300f+ Universal Tv Remote. These cheap (£1.00) remotes are available from poundland, etc.

1) Turn on your TV, ensure it it tuned to a channel and the sound is on.
2) Press the [set] button for about 5 seconds, until the LED stays on.
3) Press the MUTE button, the LED should flash twice.
4) Point towards the TV and press the power button. Don't worry if nothing happens.
5) Press and release the power button every second or so, eventually (for me about 120 times) the sound will go off. NOW press the [set] button to confirm your setting.
6) Pressing the power button again should switch the TV off. If not you're going to need to go through it all again.

Mar 18, 2010 | Sanyo AVM-3259S TV

1 Answer

We cannot tune our Wega TV

Here's the procedure:
  1. Press MENU.
  2. Press LEFT ARROW to highlight Channel Menu.
  3. Press DOWN ARROW to highlight Cable. Press CENTER BUTTON to select.
  4. Press DOWN or UP ARROW to highlight On or Off according to how you connected your TV. Press CENTER BUTTON to select.
  5. Press DOWN ARROW to highlight Auto Program. Press CENTER BUTTON to search for channels.
  6. After Auto Program finishes, press MENU to exit.

Nov 06, 2009 | Sony FD Trinitron WEGA KV-32FS120 32" TV

1 Answer

How do I tune in a grundig tv

Press and hold i key on rc tuning menu will appear

Jun 21, 2009 | Standard (CRT) Televisions

2 Answers

Tuning a Grundig Tele Pilot 750c Television

It might be an old hotel tv. Try this, it worked for me

basically you hold the i button whilst turning on the tv.


Jan 07, 2009 | Grundig GF70-600 TV

1 Answer

Retuning channels on prope channel

The retuning process is as follows:

  1. Press the [i+] or MENU button on the remote control to display the DIGITAL INFO menu.
  2. Press the BLUE button to display the MAIN MENU.
  3. Press the UP or DOWN buttons to highlight AUTO TUNING then press the OK button to display the AUTO TUNING MENU.
  4. Press the RED button to start the auto tuning process for all available digital channels.
  5. Wait for the process to complete.

If you wish to CANCEL the auto tuning process whilst it is processing then press the BLUE button at any time.

You may lose some channels when you retune the TV as the channels have been rearranged. To locate them look at the EPG although you may still find that some channels are no longer available on FREEVIEW. See the following link for additional information

If the above process does not work then check the link above for additional information and also visit the accompanying site links below to find more information for your model of TV / FREEVIEW box.

For troubleshooting the retune procedure visit

For specific model information visit

Oct 26, 2008 | Sony FD Trinitron WEGA KV-36FS120 36" TV

1 Answer

Grundig tv

on most tvs you go to menu then setup then if you have cable go to where it says (air and cable) select cable or if you just have a anttania select air then go up to where it says autoprogram then push to get you channels in you should be abale to use the remote or the front panel on tv if this don't work give me the make and the tv name. hope this helps if not let me know thanks randall

Jun 13, 2008 | Grundig GF70-600 TV

1 Answer

Grundig tv

some times on the universal remote ther are more then 1 code that will work with your tv. some codes will only do some things try all the codes on the remote for that brand. you should find one that works for you with 3 remotes you have a better chance of getting the right one hope this helps you

Jun 13, 2008 | Grundig GF70-600 TV

1 Answer

Grundig wf823020a tv tuning

if you cant get it with the remote try the front panel if it has any buttons besides power go to menu and see if it's there

Apr 28, 2008 | Grundig GF70-600 TV

Not finding what you are looking for?
Standard (CRT) Televisions Logo

Related Topics:

1,400 people viewed this question

Ask a Question

Usually answered in minutes!

Top Grundig Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

66413 Answers

matt martin
matt martin

Level 3 Expert

1187 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Grundig Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides