Question about Samsung HL-P5063W 50" Rear Projection HDTV

1 Answer

"No Connection"... My first attempt with HDMI SUUUUCKS- HELP

I own a Samsung HL-P5063WX/XAA (for a few years now) & have finally decided to make the most of my HD-ready DLP by experimenting with Blu-Ray, DVD Upconvertor, etc. I purchased a Samsung Blu-Ray with HDMI cable 2 days ago (from Best Buy)- it worked beautifully for 15 minutes, then I turned it off. I turned it on again an hour later, but suddenly "No Connection" is available. Have tried all troubleshooting tips (relating to the Blu-Ray, assuming that was the problem) and spoke to tech (who had me repeat same steps), but to no avail. I decided that a day & a half was enough time wasted, so I returned the player & HDMI cord to BB, decided to exchange it for a MUCH LESS expensive Toshiba DVD Up-convertor (along with a new HDMI cord)... still experiencing the exact same problem. No Connection. Have used canned air to clean the once-used HDMI port (thinking dust could be the issue), but no improvement.

For grins, I hooked the Toshiba up to a new, small Samsung LCD TV in my office (via HDMI) & it works beautifully. Any suggestions how to address so that I can use it with my big Samsung DLP-TV?? Any help would be VERY APPRECIATED (I'm totally frustrated!!)

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 159 Answers

The connector board inside the tv is the one has circuit traces already broken. there is nothing outside the tv can be done. The HDMI conector is high end technology solder. finally the solution is to replace the conector board inside the tv.

Posted on Apr 08, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Samsung Hl-P5063wx/xaa that I recently replaced the bulb (3 months ago) then a week later replaced the color wheel. I now get only sound no picture whatsoever. I hooked up a different tv to the...


Remove projector assembly and clean out dust from cooling fans inside of it. It will require some disassembly. Then have capacitors checked on the power supply.

Apr 29, 2010 | Samsung HL-P5063W 50" Rear Projection HDTV

1 Answer

I have a Samsung HLP5063wx xaa and I am getting a HDMI not supported when I hook up my HD-DVR, any help on how to resolve this, PLEASE!!!


I fixed it, if anyone is having this problem, you will have to tell your Directv box to only accept 720p resolution, I only have one line hooked up to my Hd-DVR right now and I had to tell the Directv box that it was on a Single tuner not Dual, I re-booted the directv box and everything works. I hope this helps anyone w/ an older model DLP, It took me hours on the internet to find the answers I needed.

Jun 17, 2009 | Samsung HL-P5063W 50" Rear Projection HDTV

1 Answer

How do i reset my lamp timer samsung dlp model# HL-T4675S MODEL CODE# HL-T4675SX/XAA


Dude mine is doing excauly what u have said electronic what do I do I just replaced the bulb

May 06, 2009 | Samsung HL-T4675S Television

1 Answer

Samsung TV will turn on and off several times, then stay on.


First, need to check the power bar(if you use).
then. if don't use power bar, need to check the power board.

Dec 12, 2008 | Samsung HL-R7178W 71" HDTV

1 Answer

Samsung HL 61A750A1F


The Samsung Television has 3 HDMI inputs, You would connect an HDMI cable from the Cable box to your television and go into a menu on the television to select the appropriate HDMI input.

New cable boxes should have the HDMI connection.

Most Flat screen televisions I've seen have an input button on the television itself. Pushing it should allow you to switch between inputs.

Sep 04, 2008 | Samsung HLP4663W 46" Rear Projection HDTV

2 Answers

Samsung hlr6156wx/xaa, will not turn on, lamp button flashes and attempts to turn on, fan kicks in, then all three lights flash after a couple of attempts


samsung hlr6156wx/xaa, will not turn on, lamp button flashes and attempts to turn on, fan kicks in, then all three lights flash after a couple of attempts

Jul 12, 2008 | Samsung Televison & Video

2 Answers

Samsung DLP HL-R6167W


Most likely the digital board will have to be replaced. Not a cheap part, so you might concider using the component inputs for now if too expensive.

Jan 23, 2008 | Samsung HLN617W 61" Rear Projection HDTV

Not finding what you are looking for?
Samsung HL-P5063W 50" Rear Projection HDTV Logo

224 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69795 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

cce772000

Level 1 Expert

7 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...