Question about GE Tritonr XL GSD6260JCC Dishwasher

1 Answer

Ge triton xl dishwasher

All of the dishwasher lights are on. I press start and the machine locks, but never actually begins the cycle. I can't unlock or open the door for the Triton XL builit in dishwasher? Anyone have this problem?

Posted by on

  • 3 more comments 
  • ratko8 Jan 02, 2009

    I can not find the model as I can't open the door. The best I can determine is that it is a Triton XL dishwasher. It is either a GSD6900 Series or a PDW7000 series.

  • ratko8 Jan 02, 2009

    Brian,

    It's funny that you suggest that because that is exactly what I ended up doing after getting frustrated and I manually opened the door with a butter knife. It is model number GSD6960N10SS and there is a plastic white piece that the handle presses on. When I look into the door from the top I see a blue plastic piece, that seems to be loose and moving around. The handle appears to work now if you do it slowly, but I think the handle mechanism will need to be replaced. But at least now I know how to get in if needed.

  • kjhartnell Feb 28, 2009

    All the lights are on, but I can not select the options that I need. I end up re-setting the power switch on the fuse breaker. That's so frustrating as I am disabled & cannot climb up or down steps. HELP

  • Expert Brian May 11, 2010

    Interesting... there is no electrical locking mechanism on the machine that would cause it to lock (like a front loading clothes washer has for instance). My best guess is that there is an off-white colored plastic piece that fits above the door handle/release that may have broken on one end. I hate to say it but I think you going to have to try to force the door open so you can get the model number or at least take the door apart. If it is a GE Profile it would be the PDW a regular GE would be the GSD. See if you can push up on the latch release from the front with the door closed at the end of the door handle release. If you can see up there you are looking for an off-white plastic piece to push up on with a small long screw driver.

  • Expert Brian May 11, 2010

    what model do you have?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 111 Answers

The part you need is a WD13X10008 from GE Parts 800-626-2002 or order online at GE Consumer Service web site here

Posted on Jan 02, 2009

  • 1 more comment 
  • Expert Brian Jan 02, 2009

    Actually here is the parts web site location from GE
    Here


  • Expert Brian Jan 02, 2009

    Link in my last post doesn't work... use the first link and you can get to parts

  • Expert Brian Jan 02, 2009

    OK once and for all... the correct part number is WD13X10045 from the GE Appliance website. Sorry about the multiple posts for the same thing.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My GE Triton XL is not working. When you push start the "sensing" and "washing" lights come on, and it fills with water. The element heats the water, but then the cycle seems to end. ...


Hi Michael,

It seems one of the components aren't doing its part in continuing the cycle. Does your machine physically pump out water?

Please confirm for me, then I will reply.

Regards

JEDEMEYER1

Jul 25, 2011 | GE Tritonr XL GSD6260JCC Dishwasher

1 Answer

All of the dishwasher lights are on. I press start and the machine locks, but never actually begins the cycle


I don't know if this will help you, but, you might find where the electrical plug is plugged in - mine is under the sink- and unplug it, wait 10 long seconds and plug it back in. See if that resets the machine. Can't think of anything else you could try, sorry. Hope that resets it. Best of luck

Apr 17, 2010 | GE 24 in. GSD6660GSS Built-in Dishwasher

1 Answer

Water does not pump into dishwasher from line, tho


the start buttom lights geen for 7 times , may be from the lack of water , but the water supply was solved & the dishwasher didnt start again !!!

Feb 01, 2010 | GE Dishwashers

1 Answer

Motor groaning on GE Triton XL Dishwsher


motor coils partly burned turns different direction in spin

Aug 08, 2009 | GE Tritonr XL GSD6260JCC Dishwasher

1 Answer

How do you reset the "Lock" cycle in a Triton GE dishwasher.


You press the" heated dry" button for three secs. and then release it, that should unlock it.

Jul 13, 2009 | GE Tritonr XL GSD6260JCC Dishwasher

1 Answer

Error code: "Ih" on GE Triton XL. What is reset combo?


After leaving the dishwasher locked with the error code still showing, I returned to find that it had reset itself and run through the full cycle.
Problem solved itself.

Dec 11, 2008 | GE 24 in. GSD4320Z Built-in Dishwasher

1 Answer

GE Triton XL


Try placing a packet in the bottom of the DW and then start a wash cycle ( use the energy efficient cycle that does not use the heater to dry the dishes..).. if it is not disolved at the end of the cycle then your water temp may not be hot enough..Hope that helps..

Aug 28, 2008 | GE Tritonr XL GSD6260JCC Dishwasher

4 Answers

GE Triton XL Dishwasher


My Triton XL soap dispenser still has a clump of soap after the cycle has finished. My glasses are left with a cloudy film, and my silverware is left marked with film on it. I have cut down on the amount of detergent, and have not overfilled. I have also tried using white vinegar as the manual states. Any suggestions? Thank you

Aug 17, 2008 | Dishwashers

3 Answers

Ge triton xl dishwasher


One answer is NEVER buy another GE product!!! I bought all GE Profile appliances when I redecorated my kitchen. Have had issues with every single piece. Refrigerator has been replaced twice (on 3rd one). Triton XL dishwasher will not reset...good luck getting it back to normal wash if you change a cycle...for example to run just a rinse. It is almost impossible to get it to reset. And don't get me started on the over the stove microwave. Never have been able to use the lights. Every time from day one I turn them on, the bulbs blow and the cover shatters. Absolutely no support from GE!!!

Dec 24, 2007 | GE 24 in. GSD6660GSS Built-in Dishwasher

Not finding what you are looking for?
GE Tritonr XL GSD6260JCC Dishwasher Logo

Related Topics:

1,491 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Dishwashers Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers

Are you a GE Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...