Question about Vivitek V37655 56" DLP TV

2 Answers

Replace lamp on dlp tv

When I turn on my vivitek 56 inch dlp tv I get replace lamp now on the screen. I replaced the lamp and it still says the same thing. I need to know how to get into the service mode to turn this off.

Posted by on

  • Anonymous Jan 22, 2009

    Ihave a 51'' vivitech tv mn# RP51HD41-A IT IS A 51" DLP. I AM trying to get into service mode to reset lamp timer . can you help with this problem?




  • Anonymous Feb 17, 2009

    Replace lamp comes on and lamp has been replaced

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

RESET THE TIMER!!!!!!!

Posted on Jan 10, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

Using the buttons on the side of the tv:

-hold one of the Volume buttons in and then press the Menu button.
-your screen should now read "Reset Lamp Timer?" with an "OK" box in bottom right side.
-press the "Enter" button on the side of your tv to acknowledge the change and your timer should be reset.

Good Luck!

Posted on Apr 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Vivitek 56 in hdtv dlp tv has no power after plugging in working outlet


Your color wheel drive motor is gone. So is all your money. No replacements parts are available to those who got those TV's. You got scammexd!

Apr 16, 2013 | Vivitek V37655 56" DLP TV

1 Answer

I have a Vivitek RP51HD41-A TV. The TV keeps turning off and on. The color and sound is fine. I have replaced the lamp and this has not fixed the problem.


If its a DLP it may have a color wheel which could be your problem (the colors will change etc)

Color wheels move at high speed and if slow down set will shut down.

The wheel if there will face the lamp. If often if failing will make a high pitched whine or a fan like sound.


5_30_2012_3_29_06_pm.jpg

May 29, 2012 | Vivitek V37655 56" DLP TV

1 Answer

One year to the date television stopped working ,,, tv would start blinking and could hear but not see


This happened to me also. I just made the deadline to receive a replacement lamp from Vivitek by 2 days, because of the warranty. If not, I would have had to pay $250. This happened in 2009. My replacement went out in Dec, 2010 and I can't find a replacement anywhere. Order a new lamp, hope this works.

Feb 21, 2011 | Vivitek V37655 56" DLP TV

1 Answer

Three green lights and two orange light blinking


One of them "LAMP" LED light indication is blinking?Yes,mean ur tv projection lamp life is over.Tv projection lamp been inside this tv like 1 1/2 or 2 year and tv been on and whatches like 4 or 5 hours of tv daily?Yes,to all these mean ur tv projection lamp require replacing.

Jan 13, 2011 | Vivitek V37655 56" DLP TV

1 Answer

New lamp, still no picture


You need to replace the ballast board the powers the lamp.

Jul 02, 2010 | Vivitek V37655 56" DLP TV

1 Answer

I replaced the lamp im my vivitek 56 inch dlp tv. But it still wont turn on. The light goes from green to red and it makes a sort of high pitch sound then stops


my vivitek RP56HD22A 56" dlp tv has a new lamp and will not turn on. when i push the on button is whines and wont come on

May 24, 2010 | Vivitek V37655 56" DLP TV

2 Answers

Viviteck 56''in.HDTV DLP TV. replaced with a new lamp bulb since I replaced this the tv wont come on only the sound for about 5 seconds then tv is silent again. any tips, Please.


The first thing to check on any TV that has a replaceable lamp is to make sure the lamp door is back on and seated correctly. You also need to make sure that the lamp is seated all the way in. The lamp door and in most cases the lamps have saftey switches they have to activate for the TV to work normal.

Nov 17, 2009 | Vivitek V37655 56" DLP TV

1 Answer

Vivitek 56 inch dlp projection is humming. why and how to fix


In my experience, the humming means your color wheel is going. The bearings inside the wheel are probably giving out.
My Vivitek started humming a couple of months ago and first I replaced the lamp.
Still hummed.
I read in other forums that humming is linked to color wheels and that seemed like where the noise was coming from.
I purchased a new wheel online and replaced it myself...
..no more humming, the picture is great and now I can listen to the movie again...not the tv!

Mar 17, 2009 | Vivitek V37655 56" DLP TV

1 Answer

Replace lamp on dlp tv


On the side of the TV press the menu and volume up buttons at the same time for three seconds. The 'reset lamp timer?' will appear on the screen. Press the OK button to accept. You're done!

Jan 05, 2009 | Televison & Video

Not finding what you are looking for?
Vivitek V37655 56" DLP TV Logo

593 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vivitek Televison & Video Experts

Jim Goldsmith
Jim Goldsmith

Level 3 Expert

1869 Answers

matt martin
matt martin

Level 3 Expert

1198 Answers

Ron F

Level 2 Expert

135 Answers

Are you a Vivitek Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...