Question about Zenith P42W34P 42 in. EDTV-Ready Plasma Television

2 Answers

Black vertical line 2 in wide on zenith p42w34p

Perfect picture except a 2 in black vertical line on the right half screen what part do i replace
thanks

Posted by on

  • melgarmarco Jan 16, 2009

    I have the same problem in my zenith p42w34p, one black line in the center of the screen can you please emailme with the information how to fix it

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

This is easy to solve. Disconnect the DVI connection from the TV and reconnect it. Secure the DVI connection to the TV by rotating 2 hand-rotatable screws. The DVI connection is connected to the TV vertically and has a tendency to come loose (via gravity) unless the connection is properly secured.

Posted on May 11, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 50 Answers

Hello, I can help you fix your plasma TV. If you have Black vertical 1.5 inch line/s that come and go. Please feel to call or message me at 1-503-432-9904 or pleasefixitdave@yahoo.com Ask for Dave! Later guys!

Posted on Feb 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Any advice on what board I should replace if the left half of the screen is no good, just showing white and black vertical bars? Right half is fine. Is the panel kaput?


If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Line, faults & possible causes to LCD screen are given with illustrations. You can get an idea about the fault to an extent.

Sep 29, 2015 | Panasonic TH-37PH9UK 37" Plasma Display -...

1 Answer

Picture is perfect except for the 3" wide black


poor contact in the vedio connector , open the cover and rmove it , clean the connector and reinstall again

Nov 06, 2010 | Panasonic Viera TH-42PZ80U Plasma TV

2 Answers

1" black vertical line in center of screen. Sony Plasma.


NOT DEFECTIVE!!!
There are 4 or 5 ribbon cables on the bottom or on one side, they control part of the plasma screen. Check the ribbon cable2_bing.gifnear the black lines. Unplug the ribbon cable and look for black chipson the underside of it, I think they say 100 on them, you need toresolder both ends on each chip. Should fix the black line issue.

Aug 19, 2009 | Zenith P42W34P 42 in. EDTV-Ready Plasma...

1 Answer

Black verticle line on screen of zenith p42w34


I'm sorry you have not been given a clear answer on how to repair your TV. I know how to fix the problem you are having (1.5 inch Black vertical lines that come and go) If you still need help fixing your Plasma TV please feel free to message me @ pleasefixitdave@yahoo.com or just give me a call @ 1-503-432-9904 and I'll help you fix your TV buddy! Ask for Dave! If your reading this post and you have a plasma or LCD type TV and need any type of help please feel free to give me a ring or message me with the problem your having. I'll do my best to help you!

Talk to you later!

Dave :-)

Nov 30, 2008 | Zenith P42W34P 42 in. EDTV-Ready Plasma...

1 Answer

Zenith P42W34P Plasma Display Panel


Hello, My name is Dave and I can help you fix your Plasma TV. Do you have Black vertical 1.5 inch line or lines on your screen that come and go? Then give me a call. Please feel free to give me a call @ 1-503-432-9904 or message me at pleasefixitdave@yahoo.com

Thank you!

Dave,

Nov 20, 2008 | Akai PDP-4247 Television

1 Answer

Black lines on sony plasma tv


go here, it will work.  follow closely and read entirely!  it worked for me on a gateway plasma!
http://www.avforums.com/forums/plasma-televisions/462873-black-line-fault-hyundai-hpt4240-fixed.html

enjoy!
stephen

Oct 27, 2008 | Zenith P42W34P 42 in. EDTV-Ready Plasma...

2 Answers

Burnt screen


RUSEY's solution is ridiculous, what a stab in the dark!
go to the following link and read closely.  it worked for me perfectly!
http://www.avforums.com/forums/plasma-televisions/462873-black-line-fault-hyundai-hpt4240-fixed.html

enjoy!
stephen

Sep 09, 2007 | Zenith P42W34P 42 in. EDTV-Ready Plasma...

2 Answers

Black vertical line on p42w34p plasma


could be a loose ribbon cable on a buffer board, or one of the buffer could be going bad

Oct 03, 2006 | Zenith P42W34P 42 in. EDTV-Ready Plasma...

Not finding what you are looking for?
Zenith P42W34P 42 in. EDTV-Ready Plasma Television Logo

Related Topics:

410 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zenith Flat Panel Televisions Experts

The Knight
The Knight

Level 3 Expert

68258 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

Are you a Zenith Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...