How do I change hour and date in Garmin 405 ? Once I had a tip on:cache:sk5SCm5XPkoJ:connect.garmin.com/help;jsessionid=F01245E68CB747E72099DB20D10531AA "Garmin ANT Agent for Mac, but now I cannot acces this page anymore. Can anyone guide me through a step by step solution ? Thank you !
Turn on the GPS. The forerunner will automatically sync time and date. Make sure the DST is switched to auto. I had the same problem and researched for the answer....which led me here. Turning on my GPS sync'd time and date for me. I hope this helps
page 28 of your owners manual indicates it sets itself from a satellite signal , however if you touch and hold menu / settings / time , you have option to set time zone and daylight savings is applicable , that should fix ya up .
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hopefully the usb adapter just confused the battery. Did you use it this time or a regular plug? Its always best to fully discharge a battery and fully recharge it for the next use. They will lose life and malfunction otherwise. Glad you've had some luck, hopefully it will work just fine now.
The instructions say touch and hold GPS and to go outside away from tall buildings and to remain stationary for several minutes. Not really sure what their definition of several minutes is guess thats their way of saying "sit still for as long as it takes." If that doesnt work I would get in touch with Garmin. 1-800-800-1020
I too was frustrated because of this. I played with the watch until I found the solution. Hope this helps!
For some reason I needed to be in the training mode to do this.
From the Time/Date mode, do the following: 1.) Press the start/stop button (upper metal button) to get out of Time/Date mode 2.) Press the Training side of the bezzle. You will see a workout display. 3.) Touch the GPS side of the bezzle until "to location" shows up 4.) Press the lap/reset button (lower metal button) to display a menu (may have to do this a couple of times, eventually when you release the button the menu does show up) 5.) Slide downward through the menu options until you find GPS 6.) Click the start/stop button (upper metal button) to toggle the gps on or off 7.) Press the lap/reset button (lower metal button) to exit the menu (goes to the "to a location" screen) 8.) Press and hold the Training side of the bezzle to return to your training screen