Question about Delphi NAV200 Portable Car Navigation GPS Receiver

2 Answers

Everything on the unit works except for the navi.

It was working fine but then just stopped. The navi icon is not lit up so it wont load when you press on it.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 4 Answers

Your card may be bad; if you have the cd you can make a new one or buy one on ebay

Posted on Jan 09, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have had this happen and found that the card with the maps had become unseated for some reason. Just reinsert it securely and it may fix the problem.

Posted on Apr 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Garmin Nuvi 260 Car GPS Receiver


When the charger is plugged into the unit, look at the main menu screen. If the charger is working correctly, the green battery icon in the upper right-hand corner eill go out. If the charger is plugged in and there is a light lit on the charger but you see the green battery icon in the upper right-hand corner of the screen on the main menu, then the unit is on battery power and the battery is not getting power from the charger. Common problem with these units are loose rear USB ports. More information can be found here:

http://www.sharc.net/gps_charger_repair.htm

Sep 06, 2013 | Garmin nuvi 260 Car GPS Receiver

1 Answer

Data connectivity not working


because you have to relog in to it

Dec 31, 2011 | Garmin GPS Devices

1 Answer

Wont stop loading maps


If your garmin nuvi wont stop loading maps, then you need to reaet the unit to get it to work perfectly fine once again. Try to hold down the power button for about 15 seconds and the gps receiver will restart, this time it will load normally and show you your maps.
If that does not solve the problem, then you need to back up your maps then format your gps receiver from a computer then restore the software and maps back on, that should do the job for you.
Hope this helps.

Dec 23, 2010 | Garmin Nuvi 465T Car GPS Receiver

1 Answer

AVIC-F700BT Destination Menu-Address isn't lit up. Can't input.


It turned out that one of the harnesses wasn't connected...:-) I only noticed when I took the unit out and checked the connections.

Jan 10, 2010 | Pioneer AVIC-F700BT Car GPS Receiver

1 Answer

Hyundai Autonet PND-3520T. Wont navigate.


There is a solution, what is the path of exe file (from the SD card and from internal storage)

Oct 29, 2009 | GPS Devices

1 Answer

Navi on xnav3550 will not open


hit the rest button very small hole usually and you will need a pin tp protrude and push in

Jun 06, 2009 | Dual Electronics XNAV3550 Car GPS Receiver

1 Answer

Voice is on but the unit stopped talking.


I don't know if this will help any, but when I updated my recently purchased tomtom go 720 with the newest app (8.3) and the new voices, map, etc...the voice feature completely stopped working on my unit. Everything else was working fine except the voice. However, I had installed an 8 gig sd card into my tomtom and put all the updates on the sd card because I was running low on the internal memory. Bythe way, only the voice instructions were not working..it would still play mp3's through the internal speaker, so I knew it must be a software problem. After several days with no voice instructions, I then proceeded to re-format the sd card and start all over, as the problem appeared to be a software issue. After re-formatting the sd card, I removed it and installed the back-up file from my tomtom before I did the first update. This time, I deleted a couple of the voices in the update package, so that I would have enough room to install the updates to the internal memory. "Bam" now everything is working perfectly again. I believe for me...the tomtom was having trouble communicating with the new application that I had previously installed on the sd card. I hope this may help someone.

Sep 28, 2008 | Tomtom GO 720 GPS Receiver

9 Answers

I need to download the updated map data to a Nav U 70


First, You MUST use the AC power adapter when connecting the unit to the computer. But if you are using the AC power and the message still is the same, try the following:

Note:Because each of these steps is a possible solution to the issue, check the status of the device after completeing each step.

!. Restart the computer
2. Close all applications that may be running
3. Temporarily disable any antivirus software you may be running
4. Reset the Nav-U unit by placing a safty pin or something likewise into the reset channel and hold down for approx. 15 sec.
5. Uninstall Microsoft ActiveSync from the Add/ Remove programs and then reinstall it using the Nav-U DVD
6. If possible, test it on another computer.

The troubleshooting steps listed above should resolve your isue. if not, service may be required.The Sony eService Web site at http://eservice.sony.com/ can assist you in obtaining service from a Sony Service Center or locating a Sony authorized dealer.

May 22, 2008 | Sony nav-u NV-U70 GPS Receiver

2 Answers

Nav-u.exe Exception


By MS Active sync from computer delete file Mounted Volume/my flash/sony/nav-u.exe (the folder SONY is hidden, you must set show hidden files in your comuter first). And then replace old navi file by exe file of total commander CE version ( download is free on site of developer) .You must rename the totalcmd.exe to nav-u.exe. Now after reboot is allowed everything, including executing any other navi software like tomtom, igo, navigon and many other (multimedia players). The oficial navi (old navigon) by sony is not so good in compare with new navi soft. .. enjoy.

Feb 08, 2008 | Sony nav-u NV-U70 GPS Receiver

1 Answer

Maps


By MS Active sync from computer delete file Mounted Volume/my flash/sony/nav-u.exe (the folder SONY is hidden, you must set show hidden files in your comuter first). And then replace old navi file by exe file of total commander CE version ( download is free on site of developer) .You must rename the totalcmd.exe to nav-u.exe. Now after reboot is allowed everything, including executing any other navi software like tomtom, igo, navigon and many other (multimedia players). The oficial navi (old navigon) by sony is not so good in compare with new navi soft. .. enjoy.

Dec 28, 2007 | Sony nav-u NV-U70 GPS Receiver

Not finding what you are looking for?
Delphi NAV200 Portable Car Navigation GPS Receiver Logo

Related Topics:

254 people viewed this question

Ask a Question

Usually answered in minutes!

Top Delphi GPS Devices Experts

Cindy Wells

Level 3 Expert

4754 Answers

yadayada
yadayada

Level 3 Expert

60769 Answers

Toyosi  Sarumi
Toyosi Sarumi

Level 3 Expert

597 Answers

Are you a Delphi GPS Device Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...