Question about ION Audio TTUSB10 Turntable

1 Answer

No sound I recently purchased the Ion TTUSB10 to backup my old records onto cd's. When I connect the USB and begin recording, I can hear the music on my computer. The issue is that the file which is created is just dead sound. I can find the file (mp3) that was created and the length is all accurate but once played in itunes, media player or quicktime, there is no music. Any ideas on what could be wrong?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Try setting the recordsettings of ur soundcard to "record what you hear". This way it will record ALL the sounds that are produced in windows. Warning: this also means that it could record an windows systemsound as well.

Posted on Feb 25, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What do I do to get this ION TTUSB10 to work with my Adobe 1. 5?

You can get Audacity free on the net. This will record any music. However if you want to really clean up the music I would recommend Magix Audio Cleaning Lab. This will make an excellent job of restoring scratched records. You do have to pay for it though. There are many versions out there some less expensive than others. Try searching Amazon for it.

Aug 27, 2014 | ION Audio TTUSB10 Turntable

1 Answer

1-I'm recorded my music 10-track on step 3 on EZ Vinyl Converter. 2-On step 5 export recording to iTunes take tolong to complete. 3-I'm access iTunes Music library. I see only 3 music track. 4-Can you...

The software is not 'seeing' the gap between the tracks, so it does not know the song has ended. Untick 'split recording into tracks' box, then sit with it as it records and click on new track every time a song ends. Tedious, but it works.

Nov 29, 2010 | ION Audio TTUSB10 Turntable

1 Answer

ION TTSUSB10 does not record stero

I solved the problem by using home page under the technology heading and clicking on USB turntables. The mixer had to be changed to 2 channels. (stereo)

Jan 05, 2010 | ION Audio TTUSB10 Turntable

1 Answer

ION TTUSB10 turntable plugged into Toshiba laptop,

Maybe the output is not good enough for line in on laptop try mic in, then double click the sound icon down bottom right where time is, goto options, properties, then recording inside of recording make sure all boxes are ticked so you have all options like mic wave stereo mix line and so on, click ok, now make sure what ever you have the turn tables pluged into is selected as your recording device and not muted try again, once this is all ok ., it should work. hope this helps. also make sure your software you use to record is also set up same. take care

Dec 03, 2009 | ION Audio TTUSB10 Turntable

1 Answer

I have a friend who wants to convert a vinyl record to CD but wants to know how to eliminate the scratching "ssss"

This one is real easy first off make sure you use good quality cables and hook it into a decent sound card I would avoid the usb connection especially if you have a lot of other usb stuff plugged in.

Then dump the software that came with it and get a copy of "Goldwave" or some other quality software.

I use goldwave to record OLD 78 rpm records which are really bad at throwing up noise. goldwave has filters that you can apply after you have finished recording
These are superb at getting rid of hiss crackle pops and a whole heap of other stuff. Its also pretty simple to use.
I have tried other software but keep coming back to goldwave. It also has some fancy tricks up its sleeve too if you want to get creative

If you found this information useful please click

Aug 13, 2009 | ION Audio TTUSB10 Turntable

1 Answer


Hi if you click on control panel, click on hardware+sound,then click on the recording tab find it will show up as microphone USB Codec click on it, click the properties button,click on advanced tab,
in the default format make sure that " 2 channel,16-bit,44100Hz (cd quality)" is selected, the incorrect default is for 1 channel.

Hope this is of some use to you.

Regards leo21682

Dec 29, 2008 | ION Audio TTUSB10 Turntable

1 Answer

Recording in mono and not stereo

Thanks for your rapid response. Fortunately I discovered the problem and was able to resolve it. Whether it is just my computer or all computers I wouldn't know. When I switched my computer off, after recording vinyl to my pc, then switched it back on again my pc had reset the default input so I had to reconfigure it again. Since then I have not used it but wonder if I have to reconfigure the recording device everytime that I switch my computer on. I did make the USB Codec microphone my default recording device and applied the setting but the pc seemed to do its own thing.

All the best

Paul Watson

Dec 28, 2008 | ION Audio TTUSB10 Turntable

1 Answer

LP audio recording seems to be at the wrong speed

1- The turntable is set to 45 rpm and the album is recorded at 33 rpm. Press the 33 rpm button the red light should come on turn the and be fine.


2- This turn table has a fast record mode where you can record a 33 rpm LP faster by spinning it at 45 rpm. If you are trying to use this mode you will have to make a software setting to tell the TTUSB10 digital converter program what mode you want to run.


Nov 29, 2008 | ION Audio TTUSB10 Turntable

Not finding what you are looking for?
ION Audio TTUSB10 Turntable Logo

Related Topics:

290 people viewed this question

Ask a Question

Usually answered in minutes!

Top ION Audio Turntables Experts


Level 3 Expert

4590 Answers

Ben Armstrong

Level 2 Expert

332 Answers

Jose Ma DM.
Jose Ma DM.

Level 3 Expert

485 Answers

Are you an ION Audio Turntable Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides