HELP MAKING A TSHIRT ON SPREADSHIRT.COM it's not letting me size it up to the maximum printing area PLEASE HELP!! Thank you!?

To make sure that the T-Shirt printout is reversed, you need to go to Print>Preferences>Media Type> T-Shirt Transfers>OK>Print. Run a test printout on a regular sheet of paper to make sure this works for your printer.
Let me know if you have any other questions or problems. Please rate this solution. Thanks.

hmm..interesting..that usually happens when the image size is larger than the print area the printer handles..check your scaling on your photo application, so that the image is NOT larger than your printable area..

No, Proview PL926wbi does not have a webcam integrated.
Product Attributes Display Technology: LCD Horizontal Viewing Angle: 150 Monitor Screen Size (inches): 19 Monitor Screen Size Range: 17" - 19" Pixel Pitch: 0.285 Product Model: PL926WBI Resolution: 1440 x 900 Maximum Resolution Resolution Width: 1440 Vertical Viewing Angle: 130

Thank you and please rate.

Go to www.singerco.com and download a manual for free, also they have a lot of good tips on their website. I know some basics, make sure that you are not using old thread, and the right size needle for the job.

install the latest firmware from the HP website support.hp.com

2. realign the printer cartridge check method on HP website

Please check the following steps:

1. Check the printer page setup
2. try to print some test pages by jumbled fonts sizes
3. try to re-boot the printer

**If this works please rate else let me know in case of further help.**

r click on printer go to preferences select second tab PAGE SETUP go to bottom and see OPTIONS and see if the printer data size spooler is ticked

this controls the amount of data sucked up into memory in any run. so printer will pause to take the next bytes of data to print.Instead of all the data in one hit

Please rate my help++++Thanks for using FIXYA

Please rate my help++++Thanks for using FIXYA

the print on my printer is too small

Hello I think I can help you. I Would not use T shirt transfer when you make up your print I would select poster print or any other form that does not automatically reverse the image. The reason your software is designed to do this is on the regular transfer paper your laying the image down on the shirt, so for it to come out right it has to be reversed. With the dark T shirt transfer paper your peeling off the backing and putting the image face up on the T Shirt.

Try to change the dpi to the maximum, maybe 600 dpi. This will make the picture more defined.