Question about GE 25952 Cordless Phone

2 Answers

My phone will not ring when called,it will just light up.

My phone does not ring. On the display there is a symbol with a music note and a slash threw it.my manual is in spanish when i bought the phone.

Posted by on

  • Adelegbe Feb 04, 2009

    my phone will not ring

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Can this phone be hook up to a cable modem

Posted on Feb 04, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Perhaps you accidentally hit the DND (Do Not Disturb) button. Touch it again to take it out of that mode.

Posted on Jan 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The phone works but will not ring. Any ideas?


check your settings SOUND and see if the slider is all the way to left. Also check icon and see if there is a slash through it. If there is a slash, tap it. Should then be able to ring/

Jan 01, 2015 | Phones

5 Answers

I have 10 Panasonic KX-T7730 using 8 phone lines. I've confirmed with AT&T that all 8 lines are setup for caller ID. I've confirmed that all 8 extensions have the Caller ID enabled. Two of the


Firstly, you have not indicated which phone system your phones are connected to, e.g. KX-TA824, KX-TDA50 or other, so I'm a little in the dark. That being said, most of the Panasonic Systems only display Caller ID information (CID) to phones that are programmed to "Ring" on the line with the incoming call, and the line button flashes green to show it's ringing... so you must "system program" ringing for the line(s) on each phone. If the CID is not displayed on a particular phone, then that line is likely not programed to ring on that phone (it's light may flash red instead of green). After you "system program" the line to ring, you can still shut off the ringing sound on a phone using the slide switch on the left edge of the phone if you don't want to hear ringing, and this will not interfere with the CID display. Also, on a second note, CID does not display on the first ring coming in from the phone company (TELCO). The CID signal is sent from the TELCO to your system after the first ring has ended, during what would be the silence period that would occur before the second ring, if there was no CID. It is for that reason that most knowledgeable installers program lines with a five second delayed ring; in this way, you don't know the call has arrived until after enough time has passed for your system to receive the CID signal... this is why it seems the CID appears instantly, with an incoming call. Check out the line programming for each line and set it to ring with a 5 second delay. If you don't set up a delay, your phones will ring and if you answer the call immediately, its likely it won't allow the system to receive CID, so no CID will be displayed for that call.

Oct 28, 2014 | Panasonic KX-T7730 Corded Phone

1 Answer

Phone line doesn't ring


First, lets get rid of the static. Try Feature #86. This will turn off background music. When a music source is not attached you get static.

Enter programming by using Feature XXX66344 password 266344. The display should show "Terminals&Sets" press the top right button with an indicator in the display. The display should show "Show set: ____ enter the extension number that you want to check or program. The display will show ***:name. Press the top right button three times. The display will show Show Line:____ with options to Scan or List. If you select Scan it will show the lines assigned to that phone. If you select List it will start with the first line in your phone system showing one of four states 1- Unassigned, 2- Ring Only, 3- Appear&Ring, 4- Appear only. Change the selection on the line by using the CHNG soft button. This is where line assignments are changed from the four states for each extension.

The only other thing that will keep an extension from ringing is "Do Not Disturb" or DND. Feature 85 and #85 will turn this feature on and Off.

Jan 31, 2014 | NorStar Meridian M7310 Phone

1 Answer

My ge 6.0 dect phone won't ring and shows a music note with a slash through it on the display even after i set the ringer on high volume


DER. Ya have it set on silent. While on a call use the up/down keys & it should de-activate silent feature. Why would ya set it like that 1stly?

Jul 03, 2009 | Thomson GE 27907GE1 Cordless Phone

1 Answer

Ringer does not work on incoming calls


If someone is calling, do you see it on the phone? If so, you may have muted the sound. Try looking for a a button with a music note on the phone. Hold that button for a bit(atleast that's how it works on my phone)

Feb 24, 2009 | Uniden 2.4 GHz Expandable Phone System...

1 Answer

My phone no longer rings.


I have that problem every couple of months. What I did was unplugged the power from the answering machine for about 25 seconds and plugged it back in and then it was fine.

Feb 23, 2009 | Uniden Cordless Phone

1 Answer

Phone wont ring


Per the manual, If there is a musical note in the display with a slash thru it, you have turned off the ringer. You have done this by pressing and holding the # button.
If you have the manual it's on the bottom of page 20 and continues on 21.
If not follow these steps.

Press Menu
Press CID/PBK (Personal set)
Press Menu (Handset Tone)
Press Menu (Ring Tone)
Press Menu and then CID/PBK to select the volume you want
Press Menu (Save Setting)

click this link to get the manual

http://www.p4c.philips.com/files/c/cd4452b_37/cd4452b_37_dfu_aen.pdf

Dec 28, 2008 | Philips CD4452S/05 Digital Telephone and...

1 Answer

New ge dect 6.0 phone receives calls but won't ring out loud


I had the same problem and it persisted for a few days. Once i sat down and found the manual at ge's home electronics website, the problem was resolved. This is a little embarasing because it's quite an easy fix. my phone handset was displaying a musical note with a line through it. This is to show that the "Do Not Disturb" function is enabled. There is an illuminated button on the base that says do not disturbe.... i hit the button and the ringer works again. If you had the same problem, you are not alone my friend. Time to double our ginko intake for the day. *laugh*

Nov 18, 2008 | Phones

2 Answers

CLI not showing, base and handset have different rings


menu global set up then hit caller id if your service provider set it up the phone will recognize it threw these directions
with the ring edit the name and go threw edit mode to turn off special ringer on the persons name that calls you its an individule setting when storing names

May 13, 2008 | Uniden Cordless Phone

Not finding what you are looking for?
GE 25952 Cordless Phone Logo

Related Topics:

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Phones Experts

kakima

Level 3 Expert

96467 Answers

Cindy Wells

Level 3 Expert

4756 Answers

yadayada
yadayada

Level 3 Expert

60867 Answers

Are you a GE Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...