Question about Linksys Wireless-G WRT54G Router

1 Answer

Limited or no connectvity

My laptop says signal strength excellent but connection is limited or no connection for internet.But my other laptop and desktop did connect to wireless same connection?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 36 Answers

You can use the WinSock XP Fix tool to reset TCP/IP protocol to original state: http://www.snapfiles.com/get/winsockxpfix.html

Posted on Jan 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Computers have limited connection to linksys wrt54g although signal is full strength


Limited connectivity
If you get a 'Limited connectivity" on you wireless connection on your laptop, it means that the wireless card on your laptop probably did not get an IP address from the wireless router.
To fix this problem, right click on the wireless icon on the Task bar and then click Repair.
This will force the wireless router to issue a IP address to the wireless card on the laptop.
Also try resetting the wireless router by turning off the power to the wireless router for a few minutes and the boot up your computers.

Oct 28, 2012 | Linksys Wireless-G WRT54G Router

1 Answer

Cant connect to my wi fi


Follow this instructions:1. connect via hard wired connection using your PC (network cable)2. open your internet explorer or any browser.3. type the numbers 192.168.1.1 on the address bar4. you will be routed to your router's settings, type admin for USERNAME: and admin for PASSWORD.5. look for the basic setup/settings6. look for the wireless settings7. under your SSID comes the WEP or WPA-PSK option8. that is your wi-fi password, then modified it and remember the password you use for you will need to enter it on your pc when you are connecting via wireless connection.you can select ASCII for password. it should be alpha numeric or combination of letters and numbers.9. select save and apply. then you are good to go.

Dec 28, 2011 | Netopia 2247NWG-VGx Wireless Router...

1 Answer

My wireless connection , says "Limited or no conectivity" I have excellent signal strength. This occured when i plugged in a second lap top with cable. Now only port 2 works and wireless is restricted. I...


Usually this is caused because the security settings on the laptop or PC do not match what is setup on the wireless router. Login to the wireless router and look at what is setup for security, WPA, WPA_PSK, etc, also the passphrase, it is case sensitive. The setup on your laptop must match.

Jun 22, 2010 | D-Link DIR-655 Wireless Router

1 Answer

Power went out and now my router is working fine but the wireless PCs cannot connect. "Limited or no connectivity" even though signal strength is excellent. Tried cycling the router. no luck.


Access the router's setup page/configuration page and change the channel of your wirelessrouter to 1, 3 or 11. Make sure you know if the wireless encryption is ON and get the key.

May 12, 2010 | Netopia (3347NWG-ENT) Router (3347NWGENT)

1 Answer

LIMITED OR NO CONNECTIVITY WITH AN EXCELLENT SIGNAL STRENGTH WITH TWO NOTEBOOKS


Wireless connection ...limited connectivity
If you connect the computer to the router , does it works? If the wired is on line that means the wired connection is OK.
Open the set up page of the router check the
wireless settings of the router.
I think your network is secured and you are not
typing the correct network key.
just open the router set up page and check the wireless settings.
Click Here for step by step solution

Feb 28, 2010 | B&G Routers

1 Answer

Laptop shows good connection, but cannot connect.


May I recommend you download Network Magic (a Cisco Product - same as Linksys) and l.et NM run its routine on your connection. Google it.

Free top download and use for eval period. read the deal at the web site

I use the paid pro version and I love it.

Oct 22, 2009 | Linksys Wireless-G WRT54G Router

1 Answer

I have a comtrend ct-5361T wireless router can not access internet


  • set the wireless settings first to no password first for this is a password issue most of the times
  • and change the SSID name and channel not auto, set to 6 or 11

Jul 31, 2009 | Routers

1 Answer

Airlink ar430w not giving a network address to netgear wpn111


Try assigning the IP address manually. To do so go to Network Connections, right click on the wireless connection and click on Properties, select Internet Protocol TCP/IP and click on Properties again. Select use the following IP address and type the address of the same range as of your Router's IP. In case you do not know the range try 192.168.1.5 or 172.16.1.5 with the subnet mask as 255.255.255.0 for both, and when you use the IP as 192.168.1.5 use the default gateway as 192.168.1.1 and for 172.16.1.5 use the default gateway as 172.16.1.1 Also select the lower option as "Use following DNS Server address" and for 192.168.1.5 use 192.168.1.1 and for 172.168.1.5 use 172.16.1.1 .Click on Ok. Click on Ok again and now check for the connectivity.

Jul 08, 2009 | Airlink AR430W Wireless Router

1 Answer

Wireless internet


You could try to manually set your IP address in the TCP/IP, the gateway and your ISP DNS

Feb 09, 2008 | 2wire (1000-400108-001) Router

Not finding what you are looking for?
Linksys Wireless-G WRT54G Router Logo

Related Topics:

175 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Routers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Mike

Level 3 Expert

4331 Answers

Steve

Level 3 Expert

3287 Answers

Are you a Linksys Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...