I just received this camera and I am having issues in transferring to the EasyShare software. I am hooking up to the computer using the usb cable and nothing transfers and the manual doesn't say anything about what you should be doing, ie. hitting a certain button on the camera, etc. Any ideas on what I should be doing?
Took me a bit to figure this out too, but if you have the software installed, you need to hook up to the camera, make sure camera is off, then plug into the USB port, the click the on button on the camera. Your camera won't actually turn on, but it should start the transfer sequence automatically after that, good luck.
I also have this problem when i plug my usb in my laptop..it wont find it so i open kodak easyshare as that is starting to run enter your usb in it should find it straight away and start downloading files
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Remember you need to turn the camera on when transferring.
Try a different USB outlet
Try a different cable
Try a different computer.
If all fails please contact KODAK in order to arrange a repair or order a new cable. Remember you cable is covered under the same warranty as the camera, so if covered you need the serial number of the unit:
understand you?re interested in transferring the pictures from your camera to your computer. Please follow the following steps 1: Connect the camera to the computer using the USB cable, U-8. 2: Turn the camera on 3: A window will automatically appear on your display. Please follow the steps given to you by the programme. If no window appears: 3: Go into my documents 4: Find the location of the camera and your pictures 5 Drag and drop from the camera to the computer
I understand you?re interested in transferring the pictures that you have on the computer over to your SD card. Please follow the following steps 1: Connect the camera to the computer using the USB cable. 2: Turn the camera on 3: Go into my documents 4: Find the location of the camera and your pictures 5 Drag and drop from the computer to the camera
Have you downloaded the Kodak Easyshare software? It will be easier to transfer picture from the camera to the computer also easyshare software has feature to enchance picture download not to mention that you can send picture thru email using the esayshare software. To download the software visit www.kodak.com/go/easysharesw.
Transferring pictures/videos with the USB cable 1 Turn off the camera. 2 Plug the labeled end of the USB cable into the USB port on your computer. 3 Plug the other end of the USB cable into the USB port on the camera. 4 Turn on the camera. Note: EasyShare software opens on your computer. The software prompts you through the transfer process.
If still having issue importing picture from the camera to the computer call Kodak support line at 1 800 235 6325 (23KODAK)
Try opening the Kodak software first, then turn the camera on. I've found that you need the Kodak program to transfer the pictures from the camera. I personally do not like this, my old camera (also Kodak) would act like a plane old flash card/removeable device, this new one doesn't.
Anyhow, I find it super easy to just take the SD card out and pop it into the media slot in my printer. Then just open explorer and it's there just like any other hard drive or CD/DVD drive and transfer them to where ever you like.
If your printer or computer doesn't have a slot for SD cards you can get one that plugs into a USB port, pretty cheaply at any store that sells computer products.
There is an alternate method of transferring photos to the computer. Get a USB memory card reader, remove the memory card from the camera and insert it into the USB card reader and then plug it into the computer's USB port. Thes computer will see the memory card as an external memory device, You can then copy the photos to your computer.
The cause and solution may include one of the following:
The AC adapter or USB cable is not securely connected. Check the connections, and then try transferring pictures again.
Kodak EasyShare software is not installed. Install the software.
There are too many programs running on the computer. Close all software programs and try transferring pictures again.
The camera was removed from the dock during picture transfer. Replace the camera on the dock, and press the Transfer button.
The Transfer button was not pressed. Press the Transfer button.