I have a GE Range model JBP82. The warming zone and rear left burners are not working. All other burners and the oven work fine. I have tried replacing the left element which contains the front, rear, and bridge burner. Does anyone have any suggestions?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Unplug the range. Remove the oven racks. remove the oven base pan. remove the flame spreader pan. remove the glow bar ignitor on the left hand side of the gas burner and replace it with a good ignitor.
That is definitely an oldie, but a good one. I always pull each burner, remove the clips off the ceramic insulator, and replace one wire at a time. If you look at each burner control, they should all be the same ie. #1 is the same on each. There are usually only 3 wires on the small burners, and 4 wires on some of the dual coil larger burners. Also, on the back panel, there is supposed to be a wiring diagram glued to it. I may still have some parts for it if you need any.
the burners on ge range are different in size / you may have the caps on the wrong burners . 2nd / ck for the hole in the burner are clean ( do not enlarge them when cleaning .. ) if this does not work . see if the ignitor's are in good cond . if chipped replace .. mm