Question about Kenmore Elite 45986 Front Load Washer

1 Answer

Kenmore elite heavy duty top load washer with severe noise

During the spin cycle, " it will not spin" The noise is very loud and just not right. During this same cycle the tub will drain.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

It appears your timer/controller has failed in this instance.

For replacement parts - head on over to PartSelect.com or RepairClinic.com and enter in your full model number for a full parts listing.
I recommend both sites because ...


FixYa has no affiliation with either site - I have been using and recommending them for years - trouble free.

PartSelect has a great schematic database for locating the part on your unit and great "testimonials" for each part that often times includes HOW-TO information.
RepairClinic has pictures of each part they sell and also a great how-to and troubleshooting for basic repairs.


If your unit has never been serviced - there should still be an original service manual enclosed in plastic taped to the inside of the shell.
In the service manual are Error codes, maintenance procedures, and troubleshooting steps you can follow.


Anything too complicated or beyond your scope should be handled by a professional.

If you think you want to tackle the repair - and have gotten stuck on a step - reply to your question and I will be glad to help you out.




Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Posted on Sep 12, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Loud noise during the spin cycle


Did you have an oil leak at the bottom of the washer? If yes, chances are your transmission oil leaked and your transmission needs changing or repairing.

Jan 15, 2014 | Kenmore Washing Machines

1 Answer

Kenmore Elite Oasis HT makes loud noises during spin cycle.


The tub may be unbalanced and wobbling. This may be due to washing heavy items such as rugs, towels, etc. If it is noisy with regular laundry loads, the mechanism that supports the tub may be loose or broken.

Sep 10, 2012 | Kenmore Oasis Agitator 4.5 cu. ft....

1 Answer

Excessive noise during the spin cycle. we have owned the washer for 16 months. problem started 1 wk. the machine is level.


It's noisy Most noises from a washing machine occur during the spin cycle. If you hear loud thumping during the spin, the load of clothes may have become unbalanced. Stop the washer and redistribute the clothes, then re-start it. Repeat these steps if necessary.

Jan 03, 2010 | Kenmore Elite Oasis 27052 Top Load Washer

1 Answer

Noise during spin after changing clutch / kenmore elite washer


The clutch is likely failed again - or the coupling this time.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

May 27, 2009 | Kenmore Elite Oasis 27052 Top Load Washer

1 Answer

Very Noisy Operation


you will have to access the bottom of the agitator from the back of the machine. Either you have loose bolts or else you agitator bearings are shot

Jan 28, 2009 | Kenmore Elite Oasis 27052 Top Load Washer

1 Answer

Kenmore elite heavy duty top load washer


REMOVE 3 SCREWS FROM BOOTOM PANEL CLEANE OUT PUMP RESOLVES YOUR PROBLEM , GRINDING NOISE SOMETHIG STUCK IN PUMP WONT DRAIN,,,,

Jan 01, 2009 | Kenmore Elite 45986 Front Load Washer

1 Answer

I have a kenmore elite washing machine and the spin cycle will not work.it both fills up and drains water but it wont spin.


I have a kenmore elite washer. whwn on spin cycle it does not spin and als o will no agitate. There is a loud noise wen on spin cycle. Please help

Dec 20, 2008 | Kenmore 24032\24036 Top Load Washer

1 Answer

Kenmore series 80 washer makes loud knocking noise during spin cy


Unless your front loader is set firmly on concrete and leveled to perfection, the force of a heavy wash load spinning in excess of 1000rpm will create a bit of vibration and noise.A firm footing is your best defense against to much movement.
Also due to the earlier movements during the spin cycle, the shocks that are used to dampen the spin cycle might have been broken or damaged.
If the problem persists inspite of proper levelling, please do check for the shocks or might have them replaced them for good.

Dec 14, 2008 | Kenmore 24032\24036 Top Load Washer

1 Answer

Kenmore series 80 washer makes loud knocking noise during spin cycle


Most washer tubs are suspended by heavy rubber O-rings. These do fail with age so that the tub is not being held centered anymore. I suspect one of them has failed or come off during a severely unbalanced load.

Dec 14, 2008 | Kenmore 24032\24036 Top Load Washer

1 Answer

Squeaking Washer


did you remove the shipping pins pins when you installed it

Jan 04, 2008 | Kenmore 22422 Top Load Washer

Not finding what you are looking for?
Kenmore Elite 45986 Front Load Washer Logo

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Jesus  Colon
Jesus Colon

Level 1 Expert

12 Answers

Fred Sops

Level 2 Expert

271 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...