Question about Irwin Miter Saw Laser Guide Attachment 3061001

1 Answer

Lazer not working after batterys replaced

I replaced batters in mine wont work how do i tell if batterys are in right?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Mine did the same thing. I think it's a bad contact situation. I ended cleaning all the contact springs in the battery compartments and also putting a small dab of silicon on each battery before re-fitting the cover plate. This made sure the batteries were nice and snug in their housings. Make sure the batteries all have have the positive symbol (+) upwards when you refit them. You can also check the centrifugal switch. This is located under a triangular plastic cover. If you hold the batteries in place with your thumb, you can gently push the tiny weight against its contact and the laser should light up. DON'T LOOK DIRECTLY INTO THE LASER WHILE YOU DO THIS!!! This worked for me but I can't give any guarantees but, hey, what have you got to lose? Good luck.

Posted on Jun 09, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to load batters in my marksman rl60 lazer


3 D cells. Open the battery compartment, and insert them as indicated on the battery openings.

Dec 10, 2013 | Topcon Rlh3c Rotating Laser Level W...

1 Answer

My playstation 3 wont play my games. Nothing


i have same prob..!!! your lazer is gone and so is the warranity i bet.. there is a big prob with the 40g ps3s i live in ireland and mine is in for new lazer costing me €140. sony will replace it for €180 and give you a 80g refirbished one even if your warranity is out.....

Aug 16, 2009 | Sony Playstation 3 (PS3) Console

2 Answers

HP Laptop Battery Problem


I had a similar problems and I had my batter replace by Hp free of charge. Most like your batter could be damage internally or it could be a motherboard problem.

I suggest you visit this HP link http://h20239.www2.hp.com/techcenter/battery/Battery_max.htm

Jul 03, 2009 | HP Pavilion dv6000z Notebook

1 Answer

Battery is dead and I want to charge it and take it in for replacement


Boost your car with jumper cables and let the car idle or drive around for about 20 minutes for the alternather charge the batter on its own .if the car shuts off after you started it might be your alternather is no good . the reason why ur alternather might not be working is because the batter all it does is give enough power for the starter to crank the engine as soon as the engine starts running it gets all its juice from the alternather and it charges the batter as well. but some times when the alternather works and the batter is dead meaning all the cells inside the batter are dead it will never take the charge from the alternather. so you would have to change the batter.

if you would like to know how you can you test both parts useing a volt-a-meter... just ask...

p.s. I think its ur batter if you never changed it. so get that changed for the winter so you wont have any more starting problems during cold wheaters

Sep 26, 2008 | 2001 Chrysler PT Cruiser

1 Answer

Bluray freeze


Had the same issue. Next It will start doing the same thing with your PS3 games. Your blue-ray/lazer is going out it will quit working soon. Alot of PS3 have bad lazers in them. I replaced mine works great now.

Sep 11, 2008 | Sony Playstation 3 (PS3) Console

1 Answer

My charging port seems to not work


My advise to you is if you have Sandisk Sansa m240 it does not come with a chargeable battery so you cannot charge it,replace it and your problem will go away. I replaced my unit with a rechargeable battery and I have no more battery problems. I charge my batter in a charger when needed.

Nov 20, 2007 | SanDisk Sansa m240 MP3 Player

3 Answers

Maxon GMRS-21a


I Just had Batteries Plus rebuild mine with 600mah cells $ 23 each.

Apr 18, 2007 | Maxon Gmrs Two-way Radio...

Not finding what you are looking for?
Irwin Miter Saw Laser Guide Attachment 3061001 Logo

Related Topics:

333 people viewed this question

Ask a Question

Usually answered in minutes!

Top Irwin Saws Experts

Tom Chichester

Level 3 Expert

28048 Answers

ray gallant

Level 3 Expert

39710 Answers

Pieter Vleeshouwers

Level 3 Expert

1574 Answers

Are you an Irwin Saw Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...