Question about Palm TX Handheld

1 Answer

WiFi not connecting to cisco router

I have a palm t/x. I've been able to use the wifi at friends and some stores but when I'm at home even standing right beside my wireless router it doesn't detect a signal. I've manually entered my ssid and password but still nothing. My laptop and x-box found the signal once the password was entered. Any ideas.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 31 Answers

Most likely the Palm "listens" on another frequency.

Make sure your cisco is running the Wireless b standard as that is what the Palm Tx needs.

Mixed mode is another option (b and G at the same time)


Let's say your router is supporting the b standard. Knowing the cisco APs a bit, it is also possible to have a channel selected that an older device cannot see/or it is set for another region (which in fact is the same, as frequency ranges are different for each continent).

There are many tools for WIFI analysis, many are free. They will tell you what your router is transmitting at, etc... withouth having to go into the cisco IOS.

Posted on Feb 23, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Http go purenetworks com


On your Kindle Go Under the setting, options, Wifi and Click your Cisco Home Network, You must First enter your Home Networks Password To be able to access it the FIRST time Only, It should Automatically Sync to your HN after that.

Jan 04, 2014 | Computers & Internet

1 Answer

Cisco wifi codes


It means the router is configured for wireless access, but is not broadcasting or advertising the connection name. You can ignore it (it's harmless) or you can connect to the Cisco router and either look for an find the name, or turn on broadcasting.

If you don't have access to the router, you can try a 'sniffer' software to look at the wireless packets, but that's a bit complicated.

Aug 26, 2013 | Lenovo 3000 Computers & Internet

1 Answer

EdiMax Br-6482nS doesnt give internet


A router is only used to connect devices together in a LAN (local area network). In order to get out to the internet you also will need a modem (cable or dsl depending on your service) You will also need to pay for service through an ISP (Internet Service Provider)

May 02, 2013 | Edimax Computers & Internet

1 Answer

Connect blackberry 9300 to cisco ddr2201 router


change the radio band from n/a/g to mixed so that any device can connect to it.

Jan 06, 2013 | Cisco DDR2201 Residential Gateway -...

1 Answer

Not Connecting


Hello, Richevekelly -

You may just need to take some steps to boost your WiFi signal and / or WiFi speed.

Reade the information here:

https://www.intel.com/content/www/us/en/tech-tips-and-tricks/how-to-increase-wifi-speed.html

I also found this information on how to boost a WiFi signal using aluminum foil:

http://www.techiepaw.com/boost-wifi-signal-with-aluminum-foil/

It seems like such a McGyver hack, I had to provide it . . . if only for fun. :)

Best wishes.

Feb 04, 2018 | Cisco Linksys WirelessG Broadband Router...

1 Answer

Will not connect to wifi


Check your wifi settings in the computer to make sure the wifi is turned on and that the security key, WEP or WPS key, are the same in the computer and the router if you have security enabled. If you have an HP computer and a CISCO router try using a different WiFi channel, the router should have 10 channel options if it is a Cisco router and the default channel doesn't always work with HP computers.

Dec 26, 2011 | Computers & Internet

1 Answer

Nintendo wii


If you havea WiFi router that you use for internet then you can do this very easily by adding your WiFi settings to Wii in settings. This will also allow you to get Wii software updates and use the Store where you can download games etc.

Your friend will also have to have a WiFi router in his home with internet access and he'll also have to add those settings to the Wii.

Apr 01, 2008 | Nintendo Wii Console

Not finding what you are looking for?
Palm TX Handheld Logo

346 people viewed this question

Ask a Question

Usually answered in minutes!

Top Palm Computers & Internet Experts

yadayada
yadayada

Level 3 Expert

79865 Answers

JC Meredith
JC Meredith

Level 2 Expert

78 Answers

gary433

Level 2 Expert

237 Answers

Are you a Palm Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...