Question about AT&T 1717 Digital Answering Machine
The answereing machine says the announcement monitor is off and I don't know how to turn it on.
You can choose whether to hear the
announcement when your system answers
a call, or have it silent (off) on your end
(your caller will still hear an
1 Press and hold "Setup". After the Ring
Select setting is announced, continue
to press and release "Setup" until the
system announces “Monitor is on (or
2 Press and release "ANNC/SKIP"or "Memo/Repeat"
until the system announces your
3 Press and release "Play/Stop" or "Setup"
Posted on Jan 21, 2009
Tips for a great answer:
Jun 26, 2014 | AT&T 1717 Digital Answering Machine
Jul 04, 2012 | AT&T 1717 Digital Answering Machine
Recording Your Announcement
Before using this answering system, you
should record the announcement (up to
one minute long) that callers will hear
when the system answers a call. If you
choose not to record an announcement,
the system answers with a prerecorded
announcement: "Hello. Please leave a
message after the tone."
1 Press and hold annc/skip. The system
beeps. Speak toward the microphone
normally, from about nine inches away.
While you are recording, the Message
Window displays -.
2 To stop recording, release .annc/skip
The system automatically plays back
To review your announcement, press
and release .annc/skip
You can get a copy of your 1717 manual at this web site:
Hope this helps. Good Luck, Barb
Feb 20, 2011 | AT&T 1717 Digital Answering Machine
Jan 15, 2011 | AT&T 1717 Digital Answering Machine
Jan 07, 2011 | AT&T 1717 Digital Answering Machine
Nov 10, 2008 | AT&T 1717 Digital Answering Machine
Sep 02, 2008 | AT&T 1717 Digital Answering Machine
Aug 05, 2008 | AT&T 1717 Digital Answering Machine
Aug 01, 2008 | AT&T 1717 Digital Answering Machine
Mar 07, 2007 | AT&T 1717 Digital Answering Machine
174 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: