Question about Whirlpool 30" Self-Cleaning Freestanding Electric Range - White-on-White

2 Answers

The oven over heat when baking pies

Whirlpool Self Cleaning - Model RB275PXK-0

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Whirlpool Master
  • 19,396 Answers

The most likely is a faulty thermostat, or temp probe, in rare occasion you can also have a problem with the control assembly.


Enter model number here to find assembly diagrams and parts.

Posted on Jan 02, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 163 Answers

K..
Its a time to Replace Oven Thermostat.

for further assistance contact me.
Thanks

Posted on Jan 01, 2009

  • ronny2051 Jan 01, 2009

    When an oven doesn't maintain the set temperature, first make sure no one is allowing the heat to escape by opening its door. If not, the oven control either needs to be re-calibrated or replaced.

    If your oven has a calibration right on the knob, you can calibrate it as follows. If it doesn't call an appliance repair person. To adjust the thermostat's calibration: 

    1) Remove the oven temperature knob by pulling it off its shaft.

    2) Notice the current setting, then move the pointer in either direction to adjust its temperature slightly up or down. It's intentionally difficult to move the pointer; on some models, you'll have to remove a couple of screws. Figure moving it one notch will change the setting by 10 degrees F.

    3) For more accurate calibration, call an appliance repairperson.

    for further assistance contact me.
    Thanks


×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The bake element (in over) will no longer get hot, should the element itself be replace or could it be something else? Range model RS675PXEQ0


It does sound like the bake element is probably the problem. Many ovens turn on the broil element with 120 volts to even out the heat in the oven or pulse the broil element. This may be why the oven is warm but not baking.

Nov 12, 2013 | Whirlpool 30" Self-Cleaning Freestanding...

1 Answer

My heating elements are not heating for bake, broil or clean. just finished a round of self cleaning and now oven doesn't heat.


Hi,
The self clean or self destruct mode has burnt a wire, the relay, or the control...

A tech with an electrical meter will need to check through the wiring and see what burnt up...


Self Cleaning Oven Problem


heatman101

" Wish I had read this first. I never would have used the self cleaning option. Thanks for the info!!

Dec 13, 2010 | Whirlpool RBS275PD Electric Single Oven

1 Answer

Whirlpool Self Cleaning Oven - Model RF360BXXW Serial # FA4005915 Turned oven on bake - bottom element is not heating however top element is. Tried to change setting to 'timed bake', 'broil' and 'clean'...


Your lower element may be burned out. Generally you can firmly grasp and pull it out. Take it to a repair shop and get a replacement unit. Then simply snap it back into the same outlet where you remove the first one. It sound as if you've tried everything else so it must be the unit that is bad.

Nov 04, 2010 | Whirlpool 30" Self-Cleaning Freestanding...

2 Answers

After doing a self clean on a whirlpool oven model rbs245pd06 it will no longer heat on bake or broil.


Hi,
Unfortunately you have found out the hard way about the self cleaning feature... they cause many problems...
Here is a tip that I wrote about that and it includes some things you can try to get you oven to unlock...

http://www.fixya.com/support/r3969401-self_cleaning_oven_problem

heatman101

Mar 30, 2010 | Ovens

1 Answer

Oven won't heat after self cleaning


There is a overload thermostat located on the rear of your oven that needs to be replaced.
Self cleaning operations are not recommended by this technician.

Mar 02, 2009 | Whirlpool Ovens

1 Answer

Oven does not work after running self cleaning


Dear Dupe,

please rate this solution if it mends up ur needs,else choose fixya,


please do the following checks,

  • Reseat the element
  • Test the element
  • Test the element connectors
  • Check the thermometer bulb
  • Test the oven temperature control
  • Test the oven selector control
  • Recalibrate the temperature control

  • please rate this solution if it mends up ur needs,else choose fixya.Thank you

    Dec 17, 2008 | Whirlpool RBS305PDS Electric Single Oven

    Not finding what you are looking for?
    Whirlpool 30" Self-Cleaning Freestanding Electric Range - White-on-White Logo

    Related Topics:

    153 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Whirlpool Ovens Experts

    Dan Webster
    Dan Webster

    Level 3 Expert

    8147 Answers

     Fix Your Board
    Fix Your Board

    Level 3 Expert

    310 Answers

    Michael Thomas
    Michael Thomas

    Level 3 Expert

    3051 Answers

    Are you a Whirlpool Oven Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...