Question about Kenmore 22422 Top Load Washer

1 Answer

Washer cuts out after the rinse cycle

My washing machine would not go past the spin cycle, after the rinse cycle the water stay in and it cut off

Posted by on

  • Anonymous Jan 04, 2009

    My washing machine would not go past the spin cycle, after the rinse cycle the water stay in and it cut off

  • ahelen62 Jan 11, 2009

    how do I know if the lid switch is not working?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Check the lid switch.

Posted on Jan 10, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bosch classix 1200 exprss washing machine will not move on from the wash cycle. it will keep on washing and never moves to the rinse cycle. pump and motor works ok.


WASHER WILL NOT RINSE:
If your washer doesn't go through the washer rinse cycle, the most likely cause is the water valve. What happens is the water valve will stop letting cold water into the washer; therefore, once the washer gets to rinse it will either stop or not do anything during the whole rinse cycle.
This is because when you selected your water temperature, you selected warm/cold or hot/cold. The hot water came in and you didn't notice any problems. When it got to rinse, the cold water the cold water won't come in. Therefore, the washer does nothing.
To check the water valve, first cut the water off and remove the hoses off the back of the washer. Then one at a time point the hoses inside the washer tub and turn the water back on. If you don't have good water pressure, turn the water back off and remove the strainer that should be in one end of the hose. Inspect the strainer to see if it is stopped up, clean it and reinstall it. Now repeat this test. If you have good water pressure now, reinstall hose and your problem is fixed.
If you still don't have good water pressure, the problem is in your house plumbing and you need to call a plumber. If you had good water pressure the first time you performed the test, the water valve is bad and needs replacing.
TIMER
If your washer doesn't go through the washer rinse cycle the timer may be the problem. Sometimes the timer gets stuck in the middle of the cycle or won't turn at all. If the washer runs, but the timer doesn't turn, the timer is bad and needs replacing.
Do you have anti-flood hoses leading to the machine. If you do there is probably a loose tube in the back causing a small leak. When the hoses detect that water is still flowing after a certain amount of time due to the leak it shuts down and causes the machine to turn off during the rinse/spin cycle

Mar 25, 2015 | Bosch Washing Machines

1 Answer

Cold water won't stop before rinse cycle


if it fails to stop running only at the rinse part of the cycle it is probably in the timer as the solenoid valve has to cut the water off when the washer fills for the wash cycle too. fills for wash cycle and cuts off water, washes and drains, refills for rinse cycle and water just keeps running? does this every time you run it? that's in the timer. bad solenoid (water inlet valve) would keep running even on wash fill up. hope this helps.

Feb 25, 2014 | LG WM2688H Front Load Washer

1 Answer

Maytag top loading washer 1994 does not spin during rinse cycle


Hi,
The problem will be the spinning coil is cut off or short circuited kindly replace the motor and check it

May 17, 2010 | Washing Machines

1 Answer

Whirlpool washer won't rinse or spin w/o manually turning knob


It is most likely that you have a faulty water inlet valve. Some machines have a seperate valve for rinse to flush in a fabric softener I suspect that your detergent flushing valve is faulty.....Good luck Nomess

Apr 23, 2010 | Washing Machines

1 Answer

At rinse cycle, cold water won't cut off after


if you unplug the washer does the water continue to enter? if the answer is yes you have a bad fill valve. is it only when you use cold water? what is the model number?

Apr 05, 2010 | Washing Machines

1 Answer

Washer goes through 40 min. cycleand stays on 1 min. spinning and rinsing for another 30 min


your using way to much soap
during that whole 1 minute cycle it is detecting suds and trying to rinse the cloths further
cut way down on the soap here
you should be using 1 tablspoon per load
wash one load without anyy soap at all
this should help to reduce your suds lock

Oct 06, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Rise and spin


While the machine is operating take the timer knob and wiggle it around. If the machine cuts out momentarily then the timer is bad. If not then I would check out the lid switch to see if it is affecting the rinse and spin cycle.
Eric

Sep 17, 2009 | Kenmore 24032\24036 Top Load Washer

1 Answer

Washer quite after rinse cycle, won't continue through to spin


The balance sensor has likely failed.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

May 28, 2009 | Kenmore Washing Machines

1 Answer

I have a maytag model


the machine is several years old and may have multiple problems one could be the timer since it is not cutting off, and either a problem with the water pump or something blocking it
probally time for a new washer

May 05, 2008 | Washing Machines

Not finding what you are looking for?
Kenmore 22422 Top Load Washer Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Archaeology
Archaeology

Level 3 Expert

662 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...