Question about Sony BRAVIA KDL52XBR2 Television

1 Answer

Hi my picture is not as clear as my friend's tv. My screen seems almost cloudy.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 744 Answers

It depends upon the room size and how you have placed the tv. if u position it in a proper manner then you will have a clear view.

Posted on Jan 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have a samsung LN40A650A1F codeXZA tv and the left side is cloudy and has two clear lines that double expose the one side what part do I need to replace on this tv?


Hi our lcd screen is defective. It will be too expensive to replace if you find a used one it ight be economical.


You can get get parts for this tv at www.interliquidparts.com

Nov 24, 2011 | Samsung LN40A650A LCD TV

1 Answer

When I turn on the set, the right half of the screen is distorted. It flickers, different colors move from center to far right of screen, double images that appear as negitives and sometimes that half of...


Hi,
Symptom shows problem with lcd panel (screen) however, t-con board that is part of lcd panel could be defective and cause of these symptoms.
T-Con board is located at top center of cld panel at rear and would be covered with metal shield. There are three type of t-con board utilized according to lcd panel and are available in shopjimmy.com
Please check what t- con board is similar with your tv board to order it. If you are not handy with electronics stuff repair then local tv repairman will help you to replace t-con board that might solve your tv picture problem.
Thanks.

Jan 29, 2011 | Samsung LN46A550 LCD TV

1 Answer

TV is nearly 7 yrs old, seems the HD picture is not as clear as it used to be. Is it just me or is something wearing out.


You have glasses,put it on?Tries come close to the tv.Tries few channels that play in HD modes 1080p is it clear.If picture dull slightly fuzzy,the LCD picture screen is getting old in age that all.

Aug 24, 2010 | Flat Panel Televisions

1 Answer

Hi! i just purchased a Samsung SyncMaster P2370HD P2570HD flat screen tv and I was wondering if you are able to tell me the correct settings to put on the TV to get the best picture? The picture does not...


Hi Suzette my name is Roety,
I can help you with your issue ,
First of all make sure you have an HD signal connected.
These days using a non HD box will produce a bad picture on an HD TV.
If using a cable/Dish box set the output resolution to 1081i only,
for picture controls set them all center and max out the picture/contrast control 
 
 
If I have helped you with your issue please click accept.
If you have more questions you can still respond until this post expires,
I will reply asap
Thanks

Nov 28, 2009 | Samsung Flat Panel Televisions

1 Answer

Tatung plasma has cloudy screen. In and out seems to depend on backround color if picture is bad or not


That was the first generation, I would invest in another set considering the age and parts availability.

Apr 29, 2009 | Flat Panel Televisions

1 Answer

Picture won't come in clear until TV "warms up" for 15 minutes or more


Change the capacitors first per the instructions in the link below. Symptoms could be anything from high-pitched hum to no picture at all. On these defective models, I would start at the caps and work back. It won't hurt to replace them anyway.

http://www.fixya.com/support/r741402-polaroid_flm_373b_lcd_tv_black_screen

Aug 28, 2008 | Polaroid FLM-323B Television

1 Answer

My HD TV is no longer showing a clear picture


Sure sounds like the CRT fluid is cloudy and needs to be replaced.
If its not the fluid the convergence chips are bad.

Here are some of the most common symptoms and example photos of a convergence problem


  • Screen looks 3D
  • Colors don't line up
  • One or more colors can't be adjusted when using the convergence menu.
  • Screen is bowed or warped.
701cb04.jpg
77ea520.jpg
f0900cb.jpg

Here is a quick test....

Using your original remote go-to the tv settings then goto the convergence section.

Try to adjust the red and then the blue convergence.



You should be able to move them up, down, left, and right.

If you can't move them in all directions your convergence chips are bad and should be replaced. This is a common problem.


2c07611.pngSolution


You need to replace the convergence chips and convergence resistors. Check the site www.TvRepairKits.com. They have put together a kits for most models. If you don't see a kit for your set send them a quick email and they will put one together for you. Their kits includes photo instruction guides, original Sanyo STK chips, convergence resistors, pico fuses, etc.

Aug 03, 2008 | Philips 51PP9100D 51 in. Television

1 Answer

Cloudy patches from backlight leakage in LCD TV


You have to send it back to company to fix this problem>

Dec 04, 2007 | Flat Panel Televisions

Not finding what you are looking for?
Sony BRAVIA KDL52XBR2 Television Logo

Related Topics:

128 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Flat Panel Televisions Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

yadayada
yadayada

Level 3 Expert

60667 Answers

Paul Bade

Level 3 Expert

1392 Answers

Are you a Sony Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...