Question about Harvard Xh 7000 Hockey Table

3 Answers

Air hockey table keeps scoring on it's own.

I have a Harvard air hockey table and have found that one side scores fine but the other keeps scorig on it's own. I took the LED's out and checked for broken wires thats fine. Do you know where to get parts for Harvard tables? This wire has a phone jack on one end and the to LED's on the other.

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

This table uses low voltages for the scoring lever. I agree with fixer1950. Check / disassemble the goal / scoring assembly, and look for the scoring lever. sometimes just 2 metal plates. should see where it's touching the scoring strip and you can test it by moving it with your finger / pen / other device.

Try adjusting it further away, and test again with a puck to ensure proper operation..

Posted on Dec 07, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,976 Answers

You probably have a scoring lever stuck.

Posted on Feb 13, 2009

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 51 Answers

This is a Fairly simple fix..... Ok so the first thing you need to do if you can turn of the fan and listen for crackling because the circut is probabley shorting out... but if you can just listen close and look for darkened wires and then fix the incorrect wire

Posted on Feb 11, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

There are a few wires off underneath the game table. Score board is not working, need wiring diagram from the battery holder, to the on -off buttons & to the scorebord. The whole wiring diagram from...


To be precise, your question was asked two days back and none of the experts are answering your question just because you have not provided the complete problem. Kindly let me know the color of the wires on your battery holder and the color code on the on off button and to the score board. We experts don't have wiring diagram for each and every equipment but we do have color code system.

Jan 22, 2011 | Carrom Super Stick Table Hockey Game

2 Answers

Puck dont glide


There may not be enough air blowing across the table. Try cleaning the filter/s at the air intake first. If that doesn't work, the fan/s may be slipping, or the electric motor/s may be in need of servicing/rewinding.

Nov 20, 2010 | Harvard Xh 7000 Hockey Table

1 Answer

Do you know where i can get parts for my older harvard air hockey table ?


Harvard game tables are made by Escalade Sports. (ESC)

Their website is here...
http://www.escaladesports.com


You can search for replacement parts, manuals, etc.

Enjoy

Nov 15, 2009 | Harvard Xh 7000 Hockey Table

1 Answer

Water left on table a few of the air holes have raised bubbles around them, tried pushing on them but they will not go down, anything we can do without replacing the top.


can you remove the top and put it on a flat surface for support ( to prevent warping ) then press down gently on the holes with a large glass marble or something similar , would that do it ?

Oct 16, 2009 | Harvard Xh 7000 Hockey Table

1 Answer

Need air hockey manual


Harvard Game Tables are made by Escalade Sports (ESC)

The manual for this table is here...

http://www.escaladesports.com/pdf/g03993.pdf

You can also search their site for replacement parts, etc.

Enjoy.

Aug 16, 2009 | Harvard Xh 7000 Hockey Table

6 Answers

Cant find parts for Harvard Air hockey table I need a scoreboard


Hi...
amazon is your solution. click here Amazon com Harvard Air hockey and chose your part. If you can't find it, feel free to contact any vendor, and they will provide to you I hope.
enjoy and best of luck

Jan 02, 2009 | Harvard Ice War 7' Hockey Game Table

2 Answers

Puck doesn't glide well


the problem that you are facing now is that you have made the holes to big for the fan to be able to distribut the air evenly so in turn you will need to get a bigger fan to compinsate for the larger holes, one of the things that we did to get the puck to slide alot better was to apply car polish to the table and the puck, let it dry then shine it like you would to your own car, i hope this helps

Jan 02, 2009 | Harvard Xh 7000 Hockey Table

1 Answer

Harvard air hockey scoing system


The controller is poorly designed and likely burned out. I am assuming you bought your's used. If it were new, you would see that each segment of the LEDs would burn out over time and stop displaying. I am rebuilding mine - I bought a microcontroller and and writing the programing from scratch. I have identified all of the pins on the controller and it will plug into all the cables on the bottom of the table. should have it done by New Years. Let me know, if it sounds like your problem. I can build an extra one - I'll check back here to see if you are interested.

Nov 23, 2008 | Harvard Xh 7000 Hockey Table

3 Answers

Sportcraft Turbo Hockey table will not power up


The customer service is somewhat oblivious to their inventory and products they sell. But, if your table is not pushing the puck, call and order a new fan (easy swap out). Also, you may use a small pin and poke each air-hole as dust accumulates and clogs system (do not use a wax or polish, only damp soft cloth)

The control box is the interface to power scoreboard.(kids pushed the transformer cord in too hard and separated the circuitry panel inside CB). I am in process of replacing mine, model number 34090, part number 34090HG08, $5.00+ SH

There are comparable control box modules for similar turbo hockey games, Atomizer, which uses a similar control box that you can swap circuitry out to your old box. (Very simple, even a cave man can do it..hah). The key is the ability to put control box back together once you disassemble inerts. (The "flip" mechanism is so shoddy it never goes back together right)

Good luck with Sportcraft and their disposable $500-600.00 air hockey tables which have a lifespan of parts of less than 5 yrs!

Nov 17, 2008 | Fat Cat 7' Air Hockey Table

Not finding what you are looking for?
Harvard Xh 7000 Hockey Table Logo

Related Topics:

828 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harvard Toys Experts

kakima

Level 3 Expert

98639 Answers

yadayada
yadayada

Level 3 Expert

63242 Answers

ray gallant

Level 3 Expert

37587 Answers

Are you a Harvard Toy Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...