Question about IBM P4 3.2/512/40/CD/XPP DT M-Class Offlease PC Desktop

1 Answer

'GENRAL PROTECTION FAULT'error seen when pc boot with xp

Posted by on

  • zameerpatil Jan 04, 2009

    Thank u so much..

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

This is what the error says ?

Trap 0000000D =========== General Protection Fault ============


tr=0028 cr0=00000011 cr2=00000000 cr3=00000000
gdt limit=03FF base=00017000 idt limit=07FF base=000017400

cs:eip=0008:2FFF3066 ss:esp=0010:00060E7B errcode=0000
flags=00010013 Cy NoZr IntDis Down TrapDis
eax=00000F44 ebx=00000004 ecx=00000005 edx=00000000 ds=0010 es=0010
edi=00070000 esi=000000A1 ebp=00000000 cr0=00000011 fs=0030 gs=0000

The boot loader files are either corrupted or missing.
To repair this problem,try boot with the Windows XP CD-ROM
and choose the option to install. On the next screen, choose
repair to repair your Windows installation. When the repair
process is finished, you will be able to boot back into your
operating system without losing data or having to reinstall
software.

Posted on Jan 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Start the pc after boot massage microsoft xp serious error please contact microsoft xp.


Did you try to boot in safe mode? if not, boot your PC, and press f8 after the logo of your unit appears but before the windows xp bootscreen..then comment you can boot

Apr 27, 2011 | Computers & Internet

1 Answer

How to farmat BIOS System, i set to boot from CD but i still yet an receiving some mess of numbers trap 0000000====== GENERAL PROTECTION FAULT=========== TR=0028 Cr0=0000000 does are the...


A general protect fault is when processor architecture is violated by any of the programs that are running. If it is only occurring when booting from CD, then the drive is probably not supported.

Mar 14, 2011 | Computers & Internet

1 Answer

Windows won't boot after an OS upgrade


The board is probably good but I've seen this many times when folks try to upgrade old computers. The drivers included with XP aren't working on your machine. It's not working with W2K because when you formatted the HD with XP it removed the IBM label from the HD. You should use your recovery disks to restore the drive.

Mar 23, 2009 | IBM IntelliStation M Pro 6219 PC Desktop

1 Answer

Bootsafe error on hp compaq notebook notebook pc while booting


Boot from the XP disc and press R at the first screen. This takes you into Recovery Console. Run these commands:

fixboot c:
fixmbr
exit

The computer will restart and hopefully it will load Windows.

If not, is your computer making clicking sounds?

Jan 25, 2009 | HP Compaq Presario SR1920NX PC Desktop

1 Answer

Hp compaq presario v3000 is not loding the OS, show an error


  • as you boot the computer, start tapping the F8 keys
  • From the boot menu, select Safe Mode
If this seems to work, you can try restoring the computer to an earlier point from Start > All Programs > Accessories > System Tools > System Restore.
If Safe Mode also fails to load, you would have to check your disk for errors or you may have to install XP all over again.
Please get back, if you need any further help.

Jan 09, 2009 | HP Compaq Presario SR1920NX PC Desktop

1 Answer

Error lights, Multiple beeps, no display.


Replace the CMOS battery and try again.  Maybe reseat the video card....

Nov 21, 2008 | Dell Dimension 5100 (D51L1) PC Desktop

1 Answer

I INSTALLED MODEL T-S461-HSB TO MY WINDOWS XP AND IT STILL DON'T WRITE OR SHOW THE SIGNATURE THATS BEING WRITTEN DOWN. CAN YOU PLEASE TELL ME WHAT I'M DOING WRONG.


you download the software eapp for using the signature pads here is the minimum requirements of install eapp software

image002.gif
The eApp software was designed to function on both laptop and tablet PC computers.
Below are the hardware/software requirements for each configuration.
Note: eApp should run under Windows 2000, Windows XP Home and Media Center versions but Windows XP Professional (32 bit) and Windows Vista (32 bit) are the only 2 operating systems that the eApp help desk currently support. Use of an unsupported operating system can inhibit your ability to use eApp as it was intended and cause extra 3rd party support expenses.
Laptop -
Minimum Requirements:
1.2 GHz CPU or faster
512 MB Ram
20 GB Hard drive
Windows XP Professional
Windows Vista

Recommended Requirements:
1.7 GHz CPU or faster
1 GB Ram
60 GB Hard drive
Windows XP Professional
512MB USB Flash

Firewall and Virus protection software -
Any third-party protection software will do. Firewall and virus protection software should be running at all times to insure that your computer is not compromised and that customer information is not stolen. In the event of a system error you may be asked to provide the help desk with the results of a current virus scan to insure your machine is functioning properly. Failure to provide the scan results may result in a delay in resolving the problem.


Signature Capture Pad - Topaz SigLite Slim 1x5

Tablet PC -
Minimum Requirements:
1.2 GHz CPU or faster
512 MB Ram
20 GB Hard drive
Windows XP Professional
Windows Vista

Recommended Requirements:
1.5 GHz CPU or faster
1 GB Ram
60 GB Hard drive
Windows XP Professional

512MB USB Flash Drive
Firewall and Virus protection software -
Any third-party protection software will do. Firewall and virus protection software should be running at all times to insure that your computer is not compromised and that customer information is not stolen. In the event of a system error you may be asked to provide the help desk with the results of a current virus scan to insure your machine is functioning properly. Failure to provide the scan results may result in a delay in resolving the problem.

Tablet PC Signature Capture Software -
Topaz Tablet PC Software $100.00 USD
A signature capture pad is NOT required but special software is needed for the Tablet PC.

Mar 14, 2008 | Computers & Internet

2 Answers

BOOTING


are you useing the 98 disk to boot to xp. Thats hat it sounds like

Jan 03, 2008 | Computers & Internet

2 Answers

General protection fault


based on limited description of the issue possible causes - 1. memory corruption 2. corruption of bios 3. boot sector on hard disk failed or crashed

Oct 03, 2007 | HP D530 PC Desktop

Not finding what you are looking for?
IBM P4 3.2/512/40/CD/XPP DT M-Class Offlease  PC Desktop Logo

Related Topics:

473 people viewed this question

Ask a Question

Usually answered in minutes!

Top IBM Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18333 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you an IBM Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...