Question about Televison & Video

Open Question

Audiovox Tv/dvd combo RC 6048

Although I do not have the tv set up for cable or satellite tv.  I expected that it would play dvds.  All I get is a blue screen.  Any suggestions?

Posted by on

5 Suggested Answers

techman
  • 3130 Answers

SOURCE: Emerson EWC27T3 27 in. TV/VCR/DVD Combo

Laura Have you tryed to unplug the unit for a bit and try pluging back in to the wall and press the eject button before anything else!! if that dosent work try pressing and holding the power button and at the same time press the eject button. If that dosent work then theres a mechanical or electrical fault thats causing it to not function vproperly and its time for a repair person to assit you. Good Luck

Posted on Jun 04, 2006

salt56
  • 373 Answers

SOURCE: Akai dvd/vhs/MP3/tv combo CFTD2785

The only thing I can help you with is a phone number
1-800-627-4368.

Posted on Jan 05, 2008

SOURCE: DVD plays only in black & white

Try turning on component (cable) for the V2 input  on your TV

Posted on Jan 08, 2008

  • 1 Answer

SOURCE: LOSS OF T.V. PICTURE

My television has sound but no picture. I can not program the television because I can not see the screen menu. I also have tried to change the antennae but this does nothing to the picture's reception.

Do you have any ideas to correct this problem. There is no warranty.

Posted on Feb 03, 2008

  • 2 Answers

SOURCE: DVD plays only in black and white

Hey, I had this problem on Thanksgiving Day, trying to watch a dvd on my mother's HDTV. You should be able to hook up most standard dvd players to hdtvs. First you have 3 cords, mine were red, yellow, and white. The connections go as follows:

HDTV:
Audio| Component. The white cord should be in a white audio slot. The yellow cord should be in a yellow component slot (video) and the red cord should be in a red video component slot labeled Pr/Cr. Make sure you match the component numbers. For instance, if you want to use component one, then hook all of the cords into the slots for component one. Most hdtvs have multiple component hookups ( think multiple "channels" for your game system, dvd player, etc) so it's important that the corresponding cords go to the correct component slots.

DVD:
Match the yellow and white cords to the appropriately colored slots. The red cord should go into the slot labeled component video out Cr/Pr. Not the red audio out. This worked for me. Hope this helps.

Posted on Nov 29, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Turned on my Hitachi DVD/VCR combo DV-PF4E}, put in DVD it showed LOADING then it just turned itself off!


Disc loading mechanism fault. Contact any service technician. Loading mechanism should be taken out from the set for repair. If you wish to get more details
http://electronicshelponline.blogspot.com/ Visit this site.

Jan 07, 2017 | Hitachi Televison & Video

1 Answer

I have a GPX TV/DVD combo Model # TDE2280B. I have only used it a few times -- now will not play a DVD even with a external DVD player connected to it -- "no signal" is the only message I get.


Have you tried resetting the set to factory default.
ELECTREPAIRUSA@ELECTREPAIRUSA or you can contact us at that address as we repair/renovate all items electronic and electrical old and new.

Jan 06, 2017 | GPX Televison & Video

1 Answer

Can not play movies from my DVD player to my Bauhn TV model no 0916/atvu65


You have checked the cable? And does the DVD play on another machine?
ELECTREPAIRUSA@ELECTREPAIRUSA or you can contact us at that address as we repair/renovate all items electronic and electrical old and new.

Jan 03, 2017 | Televison & Video

1 Answer

The color on my TV is all pink. I have tried a hard reset but it didn't help.


Your TV has lost a GREEN color from a basic color palette (Red-Green-Blue). It is often caused by:
- damaged LCD cable (which connects the display with a signal board inside the TV),
- damaged video signal cable (ex. SCART, HDMI, VGA),
- damaged video processor (on the signal board).
I can't give you a more accurate answer, because I don't know what is your TV mark and model and, in what situations you have the problem.

Jan 19, 2015 | Televison & Video

1 Answer

How to attach vcr to a tv using cable


attaching a VCR to a TV using cable is done with an RF modulator costing about 30 bucks from Walmartyou take the cable out from the VCR into the RF modulator. this device has RCA outputs separate video and audio that will go to your TV

Jul 14, 2014 | Televison & Video

1 Answer

Veon tv manual


The eject button on the remote appears as an upward-pointing arrow with an underline - see below image. The eject button on the TV has a similar symbol.

4191bd4f-0bce-464a-b56a-423972698140.jpg


However, I suspect that in your case, you might not be having a Remote.

This link says that your TV doesn't come with a Remote and DVD cannot be ejected without the remote :
VEON 19 LED TV DVD FREEVIEW COMBO A1823511 1

Jun 28, 2014 | Televison & Video

1 Answer

How do i watch my tv with a broken remote


You can buy a universal remote and program it to work with your TV. I have always had good luck with RCA universal remotes. You can also program the remote to run your cable/sat box and your DVD/blue ray player. You could also go to the web site of the company that made the TV and order a new remote. This would be more expensive but the remote would run all the funcitions while the universal may not.

May 24, 2014 | Televison & Video

1 Answer

I have a toshiba LED TV Model 40PB200, i bought it two months now. Recently, the audio in port started producing a sound as if microphone is on and the VGA for computer flickers when i connect a laptop on...


One thing is that unless it is usb you should always have the devices powered DOWN before connecting them via" wire electric data cables". it only takes 3 static volts of electricity to damage a circuit board. when you zap you buddy when you wear sox its 20 to 30,000 volts of static electricity so 3 volts would not be known let alone felt or seen. Power down and you will be well not you .

Sep 30, 2013 | Televison & Video

1 Answer

Would like to know the codes for a LG tv, Sony tv, and a TOSHIBA DVD ?


How to Program


Remotes With SET Button
1. Choose and press a device key i.e TV. LED will flash once.
2. Press "SET" Hold until the LED Lights up.
3. Enter the 4-digit Device code (refer code list).
4. The LED will flash once as each number is programmed at the end of the 4 digit the LED will turn off immediately if correct. If the LED flashes then something went wrong in the process. If the first code does not work then repeat the process with the next.
5. Important - Some brands use other manufacturers to make their devices if the codes available do not work the try the MAGIC search function.


Remotes Without SET Button
1. Choose and press a device key i.e TV. LED will flash once.
2. Press and hold BOTH the CHANNEL UP AND VOLUME DOWN button until the LED Lights up.
3. Enter the 4-digit Device code (refer code list).
4. The LED will flash once as each number is programmed, at the end of the 4th digit the LED will turn off immediately if correct. If the LED flashes then something went wrong in the process. If the first code does not work then repeat the process with the next.
5. Important - Some brands use other manufacturers to make their devices if the codes available do not work the try the MAGIC search function.


MAGIC SEARCH FUNCTION
1. The magic search function enables you to scroll through the entire code list one by one by pushing the on/off button. Each time you push the on/off button the remote automatically switches to the next code in the list and sends a signal to the device you have chosen.
2. Choose and press a device key i.e TV. LED will flash once.
3. Press and hold the SET button or if no SET button then hold BOTH the CHANNEL UP AND VOLUME DOWN button until the LED Lights up.
4. Enter the 4-digit Device code (refer MAGIC list) i.e TV is 0001.
5. The LED will flash once as each number is programmed at the end of the 4 digit the LED will turn off immediately if correct. If the LED flashes then something went wrong in the process.
6. Start scrolling by pushing the ON/OFF button as soon as your TV or Chosen device turns OFF lock the code in by pushing the DEVICE key again.

Mar 27, 2013 | Televison & Video

1 Answer

My tv has gone some orange colour


Try unplugging your tv and anything connected to it - you might want to take a picture first so you have a reference. I would also unplug everything connected to the tv: cable, stereo, etc. Wait a few minutes, then plug in and re-connect everything.

You can also go into your TV's setup menu and adjust the picture settings - try restoring the default settings first.

Mar 22, 2013 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

130 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

71635 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

yadayada
yadayada

Level 3 Expert

67911 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...