Question about Computers & Internet

1 Answer

Wireless Setup on Averatec Buddy

I turned the wireless on on my Averatec Buddy but I can't get it to connect to the internet. I have been trying for about 2 hrs now doing different things but can't seem to get it to work.

Posted by on

  • Dick
    Dick May 11, 2010

    The Buddy is only 1/2 of the connection. What are you using as a connection point? Coffee shop? Wireless router?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 142 Answers

U need to reset 1 yr device then do stape by stape wizard then configar yr device. before do this u have to conform yr devise cables are connected or not and intet cable is connect with " bordband ot internet port" u have to see first then do it reset matherd. reset make to device factory setting it's best for 2 hour work mesmatch setting's it's help u

thanks
Please Vote
jo_chinmay

Posted on Jan 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I dont know the wifi password -windows 7 of my broadband


When you power up the wireless router and the LEDs are ON then the router appears to be OK and this also applies to the DSL or cable wireless modem. To check if the modem is configured to your ISP settings and the modem connects to the Internet, connect the modem with a LAN cable to your laptop and check if you can get into the Internet. To connect to your wireless router, it needs the router's wireless settings configured and also needs the wireless cards in all the laptops and or computers to be configured with the router's wireless settings. Then the laptops and desktop computers can communicate with your wireless router. To set-up and secure the wireless router from unauthorized access, follow these steps: - 1, Connect the wireless router to your computer with a LAN cable.
2. Start your browser and enter the router's configuration URL IP address.
3. Enter the router setup, login and password
4. Change the admin password
5. Go to the wireless settings and change the default SSID and turn off SSID broadcast.
6. Setup encryption key the strongest is WPA2 (if not then WPA). The encryption key can be easily set up using a passphrase (it can be an alpha numeric phrase or words). 7. For further security measures - turn on MAC address filtering and enter the MAC address of the wireless cards on the computer/s you want to connect to this wireless router.
8. Record the settings you have made and keep it in a safe place and Save the settings.
9. Configure the wireless cards on the computer/s with the SSID and encryption settings of the router.
10. Remove the LAN cable between the router and the computer then the computers should be able to connect to the router wirelessly.

Jan 22, 2013 | Computers & Internet

1 Answer

I am trying to connect to the web with my new sylvania ce netbook and it has the right password in it I click the internet icon says connecting the shows up unable to connect. Can you help me or should I...


Using the Personal computer to arrive into network requires turning on the device that would have a password to display the system windows. After the computer turns on though would have required a computer user password or possibly not, locate an internet explorer icon whether example; google, mossilla fox pro, chrome, netscape, internet explorer, are just network interface where network features would show up on. 2. clicking on the internet icon should require a password if built to require user pass before joining a network. 3. The password would possibly been disabled in some instances, where for example clicking on the internet explorer icon should simply display a page welocoming the network required. For example, if the internet explorer icon is clicked showing display page momentarily, then www.Google.com is typed in the search space of the page displayed, a connected network should show another page displaying the features of the page or site google show mometarily after search space has been click. An unconnected network would always display a message or network unavailable or internet not setup and requiring establsiment. The most situation would be a message communicating the cause of network malfunction. if the computer has a network subscription plan, for example a provider that has promised to network the computer in question for fees, where would have provided the computer user an installation kit either software to install on the computer to be linked to a network. The computer with networking defaults would turn on completely only after which just cannot network into another setup when a page is clicked onto it. Simply, ask your network provider for further assistance.

The following are network providers to contact for subscription and technicallities involving computer telecommuncation.

Cricket wireless services
AT & T wireless services
T-Mobile wireless services
Verizone wireless services
Pocket commication services
Trac wireless services
Boost mobile wireless services

Visit any locations to inquire about networking functionalities to phones or computers or contacting online by email or phone with questions of connectivity

Dec 04, 2010 | Computers & Internet

1 Answer

I am trying to setup my wireless internet connection and I can't seem to do it? I am trying to figure out where to start. Model W3050


Just insert your broadband to your computer and install the driver for it. Then open the installed program of your broadband at the start menu, all programs. Then search were the program was installed. And try to click it for the connection.

May 20, 2010 | E-Machines W3050 PC Desktop

1 Answer

Hi! I just bought a new Averatec All in One computer and set up the internet- plugged the stick to the USB- it´s a wireless connection. A window opened: Installing Blootooth Driver, but he did not...


I assume you attempted to reboot the machine, if not you should try that. Averatec's are notorious for having driver issues in my experience. if it does this installation @ startup you can try and uncheck that process using msconfig... Windows key + R > type msconfig > enter. I'm not sure if that will work as it's the hardware manager trying to install the driver after it detects its presence, what kind of wireless adapter is it, there may be a hotfix or something for it.

Oct 30, 2009 | Averatec Computers & Internet

1 Answer

Trying to setup 4500s i had fixed


Use the Wireless setup in Control Panel to configure your wireless connection. Setup your wireless configuration with the disc you received with your Router/Modem. Call your Inet vendor for help.

Apr 12, 2009 | Dell Dimension 4500 PC Desktop

1 Answer

Keeps loseing wireless connection on laptop when swiched off


You need to save your wireless connection so that it starts automaticly when you turn your laptop back on. On your system tray goto the double computer screen icon and click it, then click 'connect to a network' then click 'setup an internet connection' and then click 'connect to the internet' and follow the wizard.

Dec 04, 2008 | HP Computers & Internet

1 Answer

Limited or no connectivity to the internet. my setup: the telephone port is approx 30m from where i need internet access. Originally I had a dlink wireless router set up but was connected via cable, now...


On which port of the D-link router did you plug the WRT160N router?

Do this setup.

Disconnect the WRT160N from D-link.

Connect a computer to port 1 of the WRT160N. Access the setup page by typing 192.168.1.1 on the address bar. you may need to type in the username and password for WRT160N. on the setup page Change the LAN IP address from 192.168.1.1 to 192.168.2.1. save the settings.

Connect a cable from port 1,2,3 or 4 of the D-link router to the Internet port of the WRT160N. turn off everything then turn them on starting from cable modem>D-link >WRT160N then computer.

You should be able to access the internet.

Oct 08, 2008 | Computers & Internet

1 Answer

I cannot connect wirelessy to internet on my compaq pressario v6000. The orange wireless light is on and the internet connectivity icons in the task bar have a red cross on them. I have tried all options...


Part 1: Before You Start loadTOCNode(2, 'summary'); You need the following: • A broadband connection to the Internet and the appropriate hardware. For example, cable-based Internet access that uses a cable modem that is provided by your ISP. • The Microsoft Broadband Networking Setup CD-ROM. • The Microsoft MN-500 Wireless Base Station. • The Ethernet cable that came with your base station. • The AC power supply. • The blank floppy disk.Check the following: • On computers that are running Microsoft Windows 2000 or Microsoft Windows XP, you must be a member of the Administrators group to set up a network. If you cannot run Setup, click Log Off on the Start menu, press CTRL+ALT+DELETE, and then log on with as an administrator. • Turn off any firewall or Internet connection sharing software on your computers. Your base station replaces these functions. The Setup Wizard cannot continue if they are enabled. • Do you have a Point-to-Point Protocol over Ethernet (PPPoE) Internet connection or a static Internet Protocol (IP) address? The Setup Wizard prompts you to type your user name, password, and service name for a PPPoE connection. For a static IP address, you must have the IP, subnet, and ISP gateway addresses. If you have one of these types of connections, gather this information from your ISP.
Part 2: Install the Software and Connect the Hardware loadTOCNode(2, 'summary'); 1. Insert the wireless base station Setup CD-ROM into the CD-ROM drive. If the Setup Wizard does not start automatically, click Start, click My Computer, double-click the CD-ROM icon, and then double-click Setup or Setup.exe. 2. Follow the on-screen instructions to install the software. 3. In the second part of the installation, select the option to set up the wireless base station, and then continue through the rest of the Setup Wizard. 4. When the Setup Wizard instructs you to connect your wireless base station, position the wireless base station close to your modem and computer, and near the center of your intended network area. If you want to set up the wireless base station vertically, attach the included stand. 5. On the back of your computer, unplug the Ethernet cable that connects your computer to your broadband modem. Leave the other end of the cable plugged in to the modem. 6. Plug the cable in to the "To Modem" port on the back of the base station. The base station is now connected to your modem. 7. Plug one end of the blue Ethernet cable that came with your base station in to the Ethernet port that is labeled 1 on the back of the base station. Plug the other end into the Ethernet port on the back of your computer. This is the same port from which you just disconnected the modem cable.

Important The modem must use its original Ethernet cable or one of the same type to connect to the base station. 8. Plug one end of the power supply that came with your base station into the power jack on the back of the base station. Plug the other end into an electrical outlet. The power indicator light on the front of the base station should turn on. 9. Return to the Setup Wizard, click Next, and then go to Part 3 of this article.
Part 3: Configure the Base Station and Network Settings loadTOCNode(2, 'summary'); Continue to follow the instructions on the screen to configure your wireless network settings: 1. Setup prompts you to enable wireless security (WEP). Microsoft recommends that you enable WEP. 2. Setup prompts you to save your network settings to a floppy disk for use in later installations. A blank floppy disk is provided for this purpose. If you do not save to a disk, you receive a list of network settings to print or write down. 3. Click Finish to exit Setup, and then remove the Setup CD-ROM from the CD-ROM drive and the floppy disk from the floppy disk drive. You can use the same CD-ROM and floppy disk to set up additional computers on your network.
Part 4: Test Your Network loadTOCNode(2, 'summary'); 1. View the status of your network in the Broadband Network Utility (BNU). Make sure that you can see your base station and the computer that is connected to it in the BNU status screen: a. Click Start, point to All Programs, and then double-click Microsoft Broadband Network Utility. b. View the information on the Network Status screen. 2. If your broadband Internet connection is being shared through your wireless network, start your Web browser program, and then try to visit a Web site. If your network is working properly, you have access to the Internet from the computer you just set up.

Aug 21, 2008 | Computers & Internet

2 Answers

I have vista on my laptop. i can connect to the router and get internet with a direct wire to the router. i can connect with a wireless connection to the router but cannot get on the internet with that...


Check the wireless switch is on, located somewhere on the laptop. Also Vista has an automated lan setup I believe, so try and refresh the IP and connect to the wireless router which default is the name of the brand usually. If that doesn't work you can right click on the lower right bar in Vista where there should be a symbol with waves or the like. it will bring up the wireless window and if you need help read the help file.

Aug 16, 2008 | Computers & Internet

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

98796 Answers

David Payne
David Payne

Level 3 Expert

14071 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...