Crashing Software and will not open aghain until windows restart
When i use the software, nte that I have uninstalled it, reinstalled it, and have done this on 3 seperate occasions. The camera will only work for one recording. You can hit record. Hope the video was perfect. and then hit stop. But if you hit record again, the software will freeze, then will become unresponsive. Then the only way to shut it off is with the task manager. But when i go to open the software again, it does not open at all. nor does it even try to open. it's aggravating. If i want to record more than one video, not only do i have to make it perfect the first time around, but i have to restart the computer everytime. and it hardly seems worth it.
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need. goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi, if your trying to "Re-install the Norton Security Software, and you had a problem or error while "Installing"; do the following: check the "Firewall," check to see if the Firewall is blocking the "Program" from being downloaded. Next check to see if there is already a "Security" software setup on the computer that is "conflicting with the download / reinstalling. You may need to have someone that have experience in checking theses areas if you have trouble finding them. I'm going to give you direct instruction to go to these areas you need to check. First, click on the "Start Button" when the window open, look in the (right side pane area) find the "Icon, Control Panel, click on it to open. There will be alot of listings, choose the "Security; Allow a program through Windows Firewall." There will be (3) buttons in the "Top" area of the next window, select the "Exception" button, click on the "Add program..." the window will change again, scroll through the "Programs until you find "Norton Security" and "highlight' just click on it, and "Click on the OK button. Restart the computer open the "software" you want to "Install / Reinstall and select to Install; follow all the instructions. Now if there is another security software interfering with the install, you have to go back to the "control Panel again, select to open, in the next window click on the (Programs) "Uninstall a program," find the software (highlight to uninstall), once you are finished, restart the computer; this will fix everything properly, if all goes well. "I hope for the best! Rating the solution is appreciated if you found it helpful, thank you."
The best way to fix this issue is to completely uninstall the Firefox from your PC and then reinstall it again.
First uninstall it from your control panel add/remove programs.Then open up My computer then C-drive and open the Programs Folder.In that if you find the Mozilla or Firefox folders just delete them permanently by holding the Shift+delete key.
Similarly open C-drive again and in Windows folder look for Mozilla and firefox folders.If you find them delete permanently.
Try uninstalling iTunes, Apple Software Update, Apple Mobile Device Support, and Quicktime. (Note: When you uninstall each of these, it asks whether you want to restart your computer. Say no until you have unnstalled the 4th one, after which restart your computer).
Then, reinstall iTunes. It should work.
If you plug in the printer before you installed the software it may be the problem. Uninstall the software and then unplug the printer and then re-install the software and only plug in the printer when asked to do so. Here is instructions from the manual. Uninstall and reinstall the software If your installation is incomplete, or if you connected the USB cable to the computer before prompted by the software installation screen, you might need to uninstall and then reinstall the software. Do not simply delete the device application files from your computer. Make sure to remove them properly using the uninstall utility provided when you installed the software that came with the device. There are three methods to uninstall the software on a Windows computer, and one method to uninstall on a Macintosh computer. To uninstall from a Windows computer, method 1 1. Disconnect the device from your computer. Do not connect it to your computer until after you have reinstalled the software. 2. Press the Power button to turn off the device. 3. On the Windows taskbar, click Start, select Programs or All Programs, select HP, select Officejet J3500/J3600 Series, and then click Uninstall. 4. Follow the onscreen instructions. 5. If you are asked whether you would like to remove shared files, click No. Other programs that use these files might not work properly if the files are deleted. 6. Restart your computer. 7. To reinstall the software, insert the device Starter CD into your computer's CD-ROM drive, follow the onscreen instructions, and also see Install the software before connecting the device (recommended).
Uninstall the Software Driver then restart Windows. Windows Will re - detect the mouse and you will have to reinstall the Driver software for the wireless mouse. Or after uninstalling the Drivers, Remove the USB receiver and reisntall the software first then plug in the receiver then restart Windows. Check the battery for the mouse as well.
Remove all the software.
Run the worm cleaner software again
Restart the computer
Ensure you are off line and the Anitvirus program is disabled.
Reinstall the software and follow the instruction exactly.
Worms don't eat printers