Question about Canon PIXMA MP160 All-In-One InkJet Printer

2 Answers

PIXMA MP140 All-In-One

I've just bought a second hand MP140,which I only intended to used as a scanner.
I can't get the scanner to operate due to an E5 error on the display,and a 2,114,0 error which appears as a pop-up when I attempt to scan.

Although empty,the cartridges are of the correct type and are seated properly.

When I remove the cartridges completely the error codes do not change.

Is an empty cartridge enough to cause this issue?

Posted by on

  • Anonymous Feb 21, 2009

    error 2,114,0

  • stawbe Mar 02, 2009

    I'm having the same problem, am i seriously gonna have to reinstall the software every time i wanna scan just cos i dont have ink?  -_-  

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 8,637 Answers

Normal 0 Driver could be corrupt.
Disconnect the printer or at least be sure it is turned off. I'd do both and reinstall the CD software program that came with the printer. When the software program asks you to connect the printer to the USB port, do so and it should again work properly.
Hope this helps. Bud


Posted on Jan 27, 2009

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 34 Answers

Fiend your solution direct from Canon. Here is your solution...

PIXMA MP140 All-In-One - 75aba9d.jpg3f22050.jpg

http://www.canon.com/printer/prob676ijt65/solution
262

Posted on Mar 15, 2009

2 Suggested Answers

Joed911
  • 4338 Answers

SOURCE: E5 and 2,114,0 errors on Canon MP160

Empty cartridges may cause this error. Here is the error code list for your printer

E2-2 = No paper (ASF)
E3-3 = Paper jam
E4 = No ink
E5-5 = The ink cartridges are not installed or a non-supported ink cartridge is installed, or the ink cartridges are not installed properly
E8 = Waste ink absorber full, or platen waste ink absorber full
E9 = The connected digital camera / video camera does not support Camera Direct Printing
E14 = The Ink cartridges whose destination are wrong
E15 = Ink cartridge is not installed E16 - Ink remaining is unknown
E16 -E19 = Failed to scan head alignment sheet
E22 = Carriage error
E23 = Paper feed error
E24 = Purge unit error
E25 = ASF(cam) sensor error
E26 = Internal temperature rise error
E27 = Waste ink absorber full or platen waste ink absorber full
E28 = Ink cartridge temperature rise error -
E29 = EEPROM error
E33 = Paper feed position error
E35 15 = USB Host VBUD overcurrent error - USB
E37 17 = Abnormal motor driver error
E40 20 = Other hardware error
E42 22 = Scanner error


If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

Posted on Nov 18, 2008

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Will not scan due to no colour ink. do not want to


hi,

As you dont want to use the colour ink,When you give the print command you wil get the print properties page ,In that you can select black and white so that you wil not use up the colour catridge. It uses black catridge only.

thanx

Jul 21, 2010 | Canon MP140 PHOTO AIO All-In-One InkJet...

1 Answer

Hello!


Please use the Canon MP Navigator which is bundled with your MP140. Or else you may download from http://support-my.canon-asia.com/

May 13, 2010 | Canon MP140 PHOTO AIO All-In-One InkJet...

1 Answer

Hello!


You may enjoy the most easiest way of scanning by using Canon MP Navigator software. You may get the download from http://support-my.canon-asia.com/

Mar 22, 2010 | Canon MP140 PHOTO AIO All-In-One InkJet...

1 Answer

Canon PIXMA MP140 All-In-One InkJet Printer I apologize for bad English, but I have an interesting case. I have an old printer, canon mfc pixma 140, and I would only use the scanner without additional...


I wonder if you could just inject the cartridges with water with a medical syringe, a turkey syringe, or something like that. Then it would be tricked into thinking the cartridges are full of ink. Use a sterile syringe in case you ***** yourself.

Feb 07, 2010 | Canon Office Equipment & Supplies

1 Answer

Need to find printer part


From http://www.canon-europe.com/Support/Consumer_Products/services_locator/index.aspx

Electroversal
Photo Printers, Inkjet Fax, Scanner, InkJet Printer, Laser Printer, InkJet MFP
Electroversal provides a return to base service for A4 Bubble Jet Printers, PIXMA iP90/iP90V, Selphy, CP, DS & PIXMA Mini Printers, the Fax B820 & B840, JX200/500, PIXMA MP110, MP130, MP140, MP150, MP160, MP170, MP180, MP210, MP220, MP450, MP460, MP470, MP510, MP520, MX300 & MX310, the LBP2900, LBP3000 and Scanners (except the dedicated 35mm Slide Film Scanners 2700F, FS2710& the FS4000US – Canon UK RCC).
Unit 2
Sedgwick Road
Luton
LU4 9DT
Tel: 01582 582023
Fax: 01582 582 087
Web: www.electroversal.com
To obtain a repair quote for products serviced by Electroversal, please call Electroversal Customer Service department on 01582 582023 or email sales@electroversal.com

CRC (Tasktron Ltd)
Photo Printers, Inkjet Fax, Calculator, Scanner, InkJet Printer, Laser Printer, InkJet MFP
CRC Tasktron Ltd provides a return to base service for Calculators, A4 Bubble Jet Printers, PIXMA iP90/iP90V, Selphy, CP, DS & PIXMA Mini Printers, the Fax B820 & B840, JX200/500, PIXMA MP110, MP130, MP140, MP150, MP160, MP170, MP180, MP210, MP220, MP450, MP460, MP470, MP510, MP520, MX300 & MX310 the LBP2900, LBP3000 and Scanners (except the dedicated 35mm Slide Film Scanners 2700F, FS2710& the FS4000US – Canon UK RCC)..
Unit 3 Wintonlea
Monument Way West
Woking
Surrey
GU21 5EN
Tel: 01483 776 060
Fax: 01483 721 389
Web: http://www.crc-tasktron.co.uk

Cura Technical

Personal Copiers, Laser Fax, Inkjet Fax, InkJet Printer, Laser Printer, InkJet MFP, Laser MFP
CURA Technical provides on-site service for A3 and PIXMA iP90/iP90V, laser Beam Printers, PC/FC Copiers, Multifunctional Printers and Fax machines. On-site service can be arranged by dialing 0844 369 0100.
Please note that Cura Technical do not service the following products: Selphy, CP, DS & PIXMA Mini Printers, Fax B820, B840, JX200/500, PIXMA MP110, MP130, MP140, MP150, MP160, MP170, MP180, MP210, MP220, MP450, MP460, MP470, MP510, MP520, MX300 & MX310 and the LBP2900 & LBP3000. These units are repaired at our Return to Base Agents, Electroversal or CRC Tasktron Ltd.
Cura Technical
Uniter House
3 Radford Way
Billericay
Essex
CM12 0DX
Tel: 0870 400 2080
Web: http://www.curatechnical.co.uk

Dec 17, 2008 | Canon PIXMA MP610 InkJet Printer

4 Answers

Installing canon mp145 to computer


You have to download the latest driver from internet and install it.

Nov 27, 2008 | Canon PIXMA MP150 All-In-One InkJet...

2 Answers

E5 and 2,114,0 errors on Canon MP160


Empty cartridges may cause this error. Here is the error code list for your printer

E2-2 = No paper (ASF)
E3-3 = Paper jam
E4 = No ink
E5-5 = The ink cartridges are not installed or a non-supported ink cartridge is installed, or the ink cartridges are not installed properly
E8 = Waste ink absorber full, or platen waste ink absorber full
E9 = The connected digital camera / video camera does not support Camera Direct Printing
E14 = The Ink cartridges whose destination are wrong
E15 = Ink cartridge is not installed E16 - Ink remaining is unknown
E16 -E19 = Failed to scan head alignment sheet
E22 = Carriage error
E23 = Paper feed error
E24 = Purge unit error
E25 = ASF(cam) sensor error
E26 = Internal temperature rise error
E27 = Waste ink absorber full or platen waste ink absorber full
E28 = Ink cartridge temperature rise error -
E29 = EEPROM error
E33 = Paper feed position error
E35 15 = USB Host VBUD overcurrent error - USB
E37 17 = Abnormal motor driver error
E40 20 = Other hardware error
E42 22 = Scanner error


If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

Nov 13, 2008 | Canon PIXMA MP160 All-In-One InkJet...

1 Answer

Canon Pixma MP140 alarmlight on, nothing else lit, no response.


Press & hold STOP/RESET button for 10 sec. Then restart.I think it fix your problem.

Oct 03, 2008 | Canon MP140 PHOTO AIO All-In-One InkJet...

2 Answers

E5 and 2,114,0 errors on Canon MP160


press resume botton for ten seconds or more the mp210 will work

Aug 22, 2008 | Canon PIXMA MP210 Photo All-In-One Printer

Not finding what you are looking for?
Canon PIXMA  MP160 All-In-One InkJet Printer Logo

624 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

98868 Answers

old marine
old marine

Level 3 Expert

1573 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...