Question about Aiwa VX-C131 13 in. Combo

1 Answer

No sound on tape

I having recording programs for a long time and never had this problem. After recording a movie last night on a new VHS tape, I have a picture and no sound. Doesn't matter if I adjust the volume on the TV. I partially recorded over another used tape (with sound recorded) to see if it was just a bad tape cassette. Nope. I read through the instruction guide, and the only two solutions given are either check if the tv is in line mode (not) or adjust the volume. What shall I do? Thank you. Kelley

Posted by on

  • Anonymous Jan 27, 2009

    picture fine sound of previous recording

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

  • Expert
  • 71 Answers

Hi , many faults for that 1- have you tried to play an old tape with sound to check that the video plays sound ?? if you have the sound of a previous tape then move to 2- from where you are recording if you are recording from tv rf channels then move to 3 or if you are recording from dve chek the audio connection that are coming from dvd to video and change it 3- the remaining last fault is you have a dirty audio head needs cleaning and if you don't know how to do so go to qualified person and if you are familiour with that open case and clean and if no refer to 5 5- the audio head it is a chrome cube with a black two thins lines in the right of the mechanism near the pinch roller rounded thing that draws the tape to move get a clean cloth and spread alchohol on it and rub the rectangle cube audio head up and down ovewr the two thin black things inside it please don't forget to do excelent rate cause i here to help you regards

Posted on May 07, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why won't the Sony controls let me click onto finalize using a Sony TV w/recoder to transfer VHS to DVD?


Is the VHS tape you are trying to record a commercial VHS tape (movie)? If so, it may have copy protection on it. The recorder is probably programmed to prevent you from making and using DVDs of commercial copy-protected VHS tapes.

Nov 13, 2015 | Zenith XBR716

1 Answer

I have a Magnavox Digital Video Disc Recorder & Video Cassette Recorder. Model# ZV427MG9 A. When recording from a VHS home movie tape to DVD there is a high pitch squealing sound. When playing the DVD...


U play another movie like a Hollywood movie DVD disc play on it have no squealing noises wright?Yes,than the blank DVD discs batch u have is bad.Tries buy another batch DVD blank discs,tries recording again should solved this problems.

Mar 16, 2011 | Magnavox ZV427MG9 DVD Recorder VCR

1 Answer

I have old home movies on these tapes.. I am looking into buying the Pinacle Dazzle DVD Recorder (convert) will this convert my tapes to DVD? Does anyone know?


You already have Movies on TDK E-HG 120 VHS tapes; All you want is to Transform the media on the tapes into another record Media or on DVD.

The following process would make possible the project

1. A DVD Recorder device would transform the movies already on one media to another media.
Note: The recorder that would be acquired should have a feed area for the VHS tapes on one hand, to be played, while on the other hand, a DVD disk area from which disk medium would be recorded.

Important Notes.
The devices required to make the process achievable includes
1. The DVD Recorder or Player alsoo known with multi perpose functionality for signal convertion capability
2. The DVD recordable disks on which to record a movies onto.

Caution
The process of recording would require selection features determinable on the recorder device else would produce movies with undesireable features

For example; VHS movies are appear in decodeable formats integral when displayed on VHS players. The caution is to select a signal conversion format suitable for movies that have to transform between recordable media.

1. A DVD disk medium has formats as design specification and on which requires consideration when attempting to transfer multi media or motion pictures.

Type of formats of decodes
NTSA standards
PAL standards
Mescem standards

NOTE;
Whenever the option is available, select NTSA or PAL for appropiate code transformation
Your DVD RECORDER DEVICE SHOULD HAVE THE OPTION TO RECORD CONSIDERING MOVIES ACROSS MEDIUM TYPES

REMEMBER;
consult professional advise before acquiring an devices and mediums

If any consultation is required, refer to user guides or manuals of the devices in question.

Consult a technical expert when the need requires it.



Dec 02, 2010 | TDK E-HG 120 VHS Tape

3 Answers

Just got this Toshiba DVR620KU and need to record from home movie VHS to DVD. Have DVD-R, I have set the time, have it on the program VHS to DVD, I start the VHS, put it on pause. Go DVD, select rec...


Good one!

Sounds like you are doing everything right. Only things I can think of are:

- Make sure the disc is a blank one.
- Try a different disc.
- Make sure the tape you are trying to dub is not encoded with Macrovision copyguarding. If it is a home-made recording then you are OK, but a factory recording on a store bought tape may cause some difficulties.

If you are still having troubles try a complete 15 minute reset by unplugging from the power source.

Good luck!

Apr 22, 2010 | Toshiba DVR620 DVD Recorder/VCR

2 Answers

My quasar started given me problems when you tape a program and try to watch it . the tv screen flutters and the sound will not come in clear. You cannot watch a rented movie because it does the same...


Hi, try getting a VHS Head Cleaner; if that don't work? try ajusting the tracking system on the remote. Modern VHS Cassette Players, and or recorders, usally have (Auto Tracking) built-in. Thanks paul7of9

Dec 31, 2009 | Quasar VHQ401 VHS VCR

2 Answers

I have a Magnavox ZV427MG9. I follow all directions in manual for dubbing VHS home movies to DVD but when I try to play the DVD back there's nothing on them.What am I doing wrong?


Depending on the procedure you may be pressing the record button instead of the D.Dubbing or Dubbing button. When recording from VHS to DVD you must first, load the blank DVD and VHS home movies, then play the VHS movies, then PAUSE the VHS movie when you want to START recording... then the only the you have to do is pressing the D.Dubbing button or the Dubbing button. If your VHS tapes starts to play after the Dubbing button is pressed you have been successful in Dubbing.

Aug 13, 2009 | Philips Magnavox MWR20V6 DVD Recorder/VCR

1 Answer

No sound Problem - Philips VR550 VHS VCR


If your pre-recorded tapes also play without sound, then check the scart lead is in straight.

If not, then it's more likely to be a dirty audio head.

Try a VHS head cleaner tape.

May 20, 2008 | Philips VR550 VHS VCR

2 Answers

I have a Sony SLV-EZ717


It sounds like the taped program was recorded on a different speed. The other VCR that you are playing the taped program may not have the speed needed to play it correctly.
Next time when you record a program try to make sure you use a speed that will be compatible on both VCRs.
For example a tape that last 120 minutes, using the different speeds will give the following recording times.
SP means "Standard Play" >>>> 2 hours
LP means " Long Play" >>>>> 4 hours
ELP means " Extra Long Play" 8 hours

Older VCRs have all the 3 speeds but newer ones only have SP and ELP.
Hope this helps.

Jan 25, 2008 | Sony SLV-N750 VHS/S-VHS playback VCR

1 Answer

Noise while playing VHS


It sounds like the tape is cocked slightly. some VHS tapes did make noise. I'd take it to the store and show them the noise.

Nov 04, 2007 | Philips DVDR3320 DVD Recorder/VCR

1 Answer

Time


Most VCRs of the last 10+ years are programmed via the remote box. If you have the matching remote, there should be a button which brings up an on-screen menu where you can select various functions such as setting the time/date, tape speed, channel programming, and the unattended recording you desire. Take a look here for an online manual: http://www.emersonaudiovideo.com/pdf/om/EWV603.pdf

Jul 04, 2007 | Emerson EWV603 VHS VCR

Not finding what you are looking for?
Aiwa VX-C131 13 in. Combo Logo

99 people viewed this question

Ask a Question

Usually answered in minutes!

Top Aiwa Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76001 Answers

 Grubhead
Grubhead

Level 3 Expert

5626 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22413 Answers

Are you an Aiwa Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...