Question about E-Machines eMachines Desktop PC

1 Answer

T5082 CF reader problem

I have an eMachine T5082 that is 1 1/2 years old (out of warranty, of course). The CF reader on the 9-in-1 digital media manager quit reading my CF (CF is good since computer can read it from an external USB card reader). Green light always on.

eMachine (Gateway) wants money for answer. I reinstalled the Vista OS disk that came with system, but nothing. Checked for updates, but MS says all is good. Disabled, then enabled driver, but again nothing.

Any suggestions appreciated.

Posted by on

  • Anonymous Mar 16, 2014

    driver not loading for CF card reader

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 63 Answers

If your comfortable opening the case, I would try disconnecting the reader from the mother board, and then reconnecting it. Sometime reseating the connections will fix it. Usually however the hardware is bad. If this is the case, you can get a replacement here
http://www.skyline-eng.com/index.cfm?fuseaction=product.display&Product_ID=6082 IT's a little pricey though, may want to watch for the part number on Ebay.

Posted on Dec 31, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Not acknowledging SD card


E-Machines eMachines Desktop PC Sd card reader ... - Fixya

www.fixya.com > ... > E-Machines > E-Machines eMachines Desktop PC
SD card in the 9 in 1 card reader, but it does not read. please check the SD Card ...SD card readers aren't capable of reading SDHC cards, even though the card will physically fit into the card reader slot. ... E-Machines T5082 PC Desktop.

Oct 02, 2015 | E-Machines T5082 PC Desktop

1 Answer

Trying to upgrade t5082 emachines from 1/2 to to 2g. the only way it will boot is if I leave the 1/2g in slot one & put one of the 2g in slot 2. Is there a way to make slot 1 read the 2g?


Your motherboard has a 1GB limit per slot so the 2 GB sticks are simply not recognized. Take them back and replace them with a 2x1GB set if you still want to upgrade the RAM.

Aug 04, 2010 | E-Machines T5082 PC Desktop

2 Answers

No telephone service


Hi, I checked the specs for this pc and it only has a Ethernet port. See specs below.
Specifications CPU1 : AMD Athlon™ II X2 dual-core processor 235e
(2.7GHz, 2MB L2 cache) Operating System2 : Genuine Windows® 7 Home Premium 64-bit Chipset : NVIDIA® GeForce® 6150 SE Memory3 : 6144MB DDR2 dual-channel (2 × 1024MB + 2 × 2048MB)
Expandable to 8GB
4 DDR2 slots (total), 0 DDR2 slot (available) Hard Drive4 : 750GB 7200rpm SATA Optical Drive : 16x DVD±R/RW Supermulti drive
Write max: 16x DVD±R, 6x DVD-RW, 8x DVD+RW, 8x DVD±R DL, 5x DVD-RAM, 48x CD-R, 32x CD-RW
Read max: 16x DVD-ROM, 40x CD-ROM Media Reader5 : Multi-in-one digital media card reader
CompactFlash® I & II, CF+ Microdrive, Secure Digital™ (SD) Card, miniSD™ Card, MultiMediaCard™ (MMC), MMCmobile™, MMCmicro™, Reduced-Size MultiMediaCard™ (RS-MMC), xD-Picture Card™, Memory Stick®, Memory Stick PRO™, Memory Stick Duo™, Memory Stick PRO Duo™, Memory Stick Micro™ Video : Integrated NVIDIA® GeForce® 6150 SE graphics Audio : 8-channel (7.1) high-definition audio
USB Speakers Communications : 10/100 Ethernet LAN (RJ-45 port) Peripherals : eMachines® PS/2 keyboard and optical mouse Ports/Other : 6 - USB 2.0 (2 front, 4 rear)
2 - PS/2 (keyboard and mouse)
1 - VGA
6 - Audio jacks
1 - Headphone jack
1 - Microphone jack
1 - RJ-45 Ethernet Dimensions : 14.2" H x 7.1" W x 16.2" D Weight : 18 lbs. (system unit only) Warranty6 : 1-year parts and labor limited warranty with toll-free tech support Software :
  • Genuine Windows® 7 Home Premium 64-bit
  • Adobe® Flash® Player
  • Adobe® Reader®
  • eMachines® Recovery Management
  • Google Toolbar™
  • Microsoft Office Home and Student 2007 (60-day complimentary trial period)7
  • Microsoft Works® 9.0
  • Nero® 9 Essentials
  • Norton Internet Security™ 20098
  • WildTangent® demo games
http://www.emachines.com/products/products.html?prod=ET1331G-03w

Here's a quick and easy solution to their problem buy a usb external 56k dial up modem.

721f40f.jpgHere's the link to buy it.
http://www.google.com/products/catalog?sourceid=navclient&rlz=1T4ADFA_enUS363US363&q=external+modem+for+dial+up&um=1&ie=UTF-8&cid=5167627218834893159&ei=RPRnS8-JFIrEsQOC8OT3BA&sa=X&oi=product_catalog_result&ct=result&resnum=3&ved=0CCYQ8wIwAg#ps-sellers

Let me know how it went.

WBTech

Feb 02, 2010 | PC Desktops

1 Answer

Installed windows 7 now my 15 in 1 card reader will not work


this is the main problem with windows 7 not all the old vista or xp software is compatible yet, i hear things like this alot with windows 7, try looking in device manager and try to auto search for the software on the net you may have some luck but if its not compatible with windows 7 it still wont work

Jan 14, 2010 | eMachines T5274 Desktop PC

1 Answer

What are the slots on the front panel used for?


Those are card reader slots.

Various types of memory cards can be used.

A memory card, (Or can be stated as Flash Memory Card), takes the place of the old Floppy Disks, for one.

It is digital. There is no disk inside, just hardware electronic components.

Due to the size of trying to explain every type of memory card that is available, and the memory card itself, I would like to give you this link,

http://en.wikipedia.org/wiki/Memory_card

Here it explains the basic format of a memory card.
You can click on the titles of the memory card/s, (in blue), to get a deeper explanation, of that particular memory card.

The specifications for your eMachines ET1810 Desktop PC, state that you have the following card reader slots for,

1.Compact Flash (Type I and II)
2.CF Microdrive
3.MultiMedia Card (MMC)
4.MMCmobile
5.MMCmicro
6.Reduced-Size MultiMedia Card (RS-MMC)
7.Secure Digital Card (SD)
8.miniSD Card
9.xD-Picture Card
10.Memory Stick
11.Memory Stick PRO
12.Memory Stick PRO Duo
13.Memory Stick Micro (M2)

Look above each slot for an abbreviation.
For example on my computer,

I have one card reader slot that is approximately 1 inch wide.
It looks like a T that is stretched out.
It has SD/MMC/SM/MS/MS-PRO, above it.

This means that the card reader slot will support, (Use),
[In order as printed above],

1.SD Card - Secure Digital Card
2.MultiMedia Card.
3.Smart Media card
4.Memory Stick
5.Memory Stick Pro

I have one more card reader slot. It has CF-Microdrive above it. A wider slot than the above, and looks like a upside down stretched out T.

This means of course that it uses, (Supports), a Compact Flash Microdrive card

I've tried to explain the various card reader slots, on your computer's front panel, without being too technical, or being offensive in nature.

If you want, I can explain as technical as you wish, or simplify my solution more.

This is the Specifications page for your eMachines ET1810,

http://support.gateway.com/emachines/desktop/2009/emachines/et/et1810/ET1810sp2.shtml

Scroll down, and look to the right of the heading - Card Reader.
These are the cards your computer supports, (Uses)

Looking at the main support page for your eMachines, it looks as though you have four card reader slots.
Three grouped together on the left side, and two in the middle.

The two slots to the far right are USB ports, with probably a headphone jack port, and a microphone port to the right of them.

This page gives a little more detail, as to what your card reader slots support,

http://support.gateway.com/emachines/desktop/2009/emachines/et/et1810/ET1810fv.shtml

Dec 24, 2009 | eMachines ET1810-01 PC Desktop

2 Answers

Does my w3507 have an agp port


No it does not have an agp port. IT has a PCI Express Port for video cards. Its much better and faster.
Details on your machine and what it has can be found at this link. Hope it helps.
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=2912877&CatId=2643

Nov 10, 2009 | eMachines W3507 PC Desktop

1 Answer

Dual Channel on an Emachines T5082


Look closely at the BOLD print

Memory Upgrade for eMachines eMachines T5082 Computer, the eMachines eMachines T5082 Computer takes the PC2-4200 DDR2 SDRAM DIMMs. Supports Dual Channel DDR2. Memory Type, and comes installed with 512 MB (removable) of Memory. You can upgrade your eMachines eMachines T5082 Computer to up to a maximum of 2.0 GB Memory, the system has 2 sockets to install Memory, already with 512 MB (removable) standard Memory installed. For best Computer performance use the maximum amount of allowed Memory per slot for your Computer.
Choose the following Memory Upgrade for eMachines eMachines T5082 Computer.

Apr 17, 2009 | E-Machines T5082 PC Desktop

1 Answer

My card reader is erasing pictures before I can download them


Try go to device manager and delete the 9 in one card reader, then tell device manager to scan for new hardware, the 9 in 1 card reader should be re-detected, drivers should be re-installed and the reader assigned a new drive letter. Good luck!

Mar 08, 2009 | Acer Aspire E380 ASE380-UD500A PC Desktop

1 Answer

Unable to run in dual channel mode


Hello,
Welcome to FixYa.

Currently there is no bios update for your system. In the course of operating my business I have seen dual channel RAM run in single channel as a result of the CPU in use. This should not be the case in your model though.

I would encourage you to speak with a Kingston rep to solve this problem as you are well within warranty.

Toll-Free:+1 (877) KINGSTON
+1 (877) 546-4786
Here is the Contact Page for Kingston if you are outside the U.S.
http://www.kingston.com/company/contact.asp

They will be able to resolve your issue which has to be related to the RAM you purchased. Even though the memory configurator pointed you to this RAM, it may not be functioning correctly and should be replaced or upgraded to a more specific RAM model.

Regards, thanks for choosing FixYa.
Worldvet

Jan 12, 2009 | E-Machines T5082 PC Desktop

Not finding what you are looking for?
E-Machines eMachines Desktop PC Logo

Related Topics:

120 people viewed this question

Ask a Question

Usually answered in minutes!

Top E-Machines PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers

Are you an E-Machines PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...