Question about Standard (CRT) Televisions

1 Answer

Do not get a clear picture on my Memorex Tv

Before I install a converter, I want to clear up the picture on my TV. When I first turn on the TV, the picture is good, but after a few seconds it gets a lot of horizontal interference on the screen. This occurs on all channels. I have standard rabbit ears antenna. Please let me know if there is a service charge and if so, how much.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 142 Answers

If you have Bright House networks as your cable provider, im pretty sure there is no charge for them to install any of the equipment. With other companies, im not sure so I would call to find out. But, yes, if you convert to cable with the converter as you mentioned, the picture will clear right up to your liking. Thanks and Happy new Year!

Posted on Dec 31, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Memorex tv model mt 2274 no vertical sweep field colaps ic 401 top blown off, please do you know ic generec number or any helpfull information thanks from ray


i have memorex mt 2274 tv's complete service manual ( 2.73Mb size) - everything is given in that manual - kindly send your email address to me i will attach that manual & send to you (free of cost) - below i have shown sample picture from that manual - check components number & value given in this sample picture with those on your tv board to confirm this manual matches with your tv's main board - i got that manual from below shown website .....iam service engineer from bangalore ( computers, laptops, ups, printers, etc... -

vishnuswamy.jpgvishnuswamy_1.jpg

Jun 14, 2011 | Memorex MT2274 27" TV

1 Answer

Memorex 19" MT1195 sound buzzing and picture not clear


May be mistuned. Retune again. Adjust antena positions. If the TV has multisystem, turn on system status to auto, by getting into the menu.

Oct 14, 2010 | Memorex Standard (CRT) Televisions

1 Answer

I have installed a Digitalstream DTX9950 converter box with my TV attached to a rooftop antenna. I can turn the TV off and on with the DTX9950 remote, but I can't bring in any stations, other than the DT...


Are you using the coaxial cable to connect the converter box to the set, or have you hooked it up with rca type video cables? The latter are highly recommended if you want a better connection and have audio/video inputs on the back of your television. But you don't want both A/V & coaxial.
Also be aware that some older antennae will not pick up digital signals well. Try to use a coaxial cable all the way up to the antenna junction. Find out where most signals are broadcast from in your area and aim the antennae appropriately. (Use a compass.) See helpful link here. Your converter remote should have a signal strength button that you can use to check the various channel strengths. If you're using a coaxial link to the tv and have little signal strength, expect a poor picture. You'll also want to select the Mono option for Audio Output in the converter menu.
Finally, depending on the age of your set, if you're using rca video inputs, use the TV/Video button or the AV button on the TV or universal remote to switch the input from the channel on your TV to the video 1 setting (or whatever picks up the digital converter signal) so you'll get that clear signal. Then you can use the converter remote to change channels, adjust volume, etc.

Jun 14, 2009 | Philips Magnavox 20MT133S 20" TV

1 Answer

The memorex brand icon comes on briefly when i turn on the set


Try the link.It may help.

http://www.devicemanuals.com/guide/Television/Memorex/Memorex-MT1134-13-Color-TV-with-front-A-V-jacks-T1RJMU5UTT.html

Jun 01, 2009 | Memorex Standard (CRT) Televisions

1 Answer

Greenish color whole screen


THERE IS APROBLEM IN VIDEO SECTION.OR CRT TUBE .REPLACED CRT BASE AND GREEN CATODE TRANSITOR OR WHOLE BASE IT WILL WORK OK

May 20, 2008 | Memorex MT201224 20" TV

2 Answers

Digital broadcast compatible


I have a 1999 RCA TV model # F27645. I wanted to know if I am going to need to get a digital converter box?

Feb 13, 2008 | Standard (CRT) Televisions

1 Answer

Female coax connector in tv bad?


If your cable converter box has audio/video connections on the back of it,you don't need to worry about using that RF coax connector. Just hook it up the same way your DVD is hooked to the TV input jack. Get a 3-wire cable (yellow-red-white)hook it to the same colors on the back of the cable box and hook the other end to an unused input on the back of the TV. Then select that input with your remote and watch TV.

Aug 30, 2007 | Sharp 27J-S100 TV

1 Answer

Delay turning on


This model uses a flat screen picture tube, and it could be that it is normal for the tube to take that long to warm up. It is also why the set is rather heavy. If you are able to return it, however -- I would opt for a "name brand" set that can at least be repaired when it breaks down. Check out consumer reports December issue for suggestions.

Dec 29, 2006 | Memorex MT2245 TV

Not finding what you are looking for?
Standard (CRT) Televisions Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

68157 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...